How to maintain a boat’s steering cables

Steering Cable

Apr 7, 2022

By keeping a boat’s steering system in proper working order, an owner can ensure that they have reliable and proper control of a boat at all times. Lack of maintenance is the major contributor to stiff steering and in some extreme cases, cable seizure. We suggest the following periodic maintenance at least twice a year:

Be certain the helm(s), cable(s), steering wheel and connection hardware are correctly assembled and in proper working order. Check for signs of stiffness, binding, excessive free play and/or wear. The cables and their components cannot be repaired; if any are not in good working order, replace them. Always replace hoses that have damage to the plastic outer jacket. Disassembling these items will void the warranty and can lead to steering failure.

hps rotary 400Full kits are available. This rotary helm system would even be suitable for a jetboat.

Clean and lubricate the engine tilt tube or cable support tube and the steering cable telescopic output ram as follows:

  • Remove the steering cable(s) telescoping ram from the tilt tube.
  • Clean the inside of the tilt tube thoroughly.
  • Remove corrosion in the tilt tube with a wire brush. Wipe until all loose material is removed.
  • Lubricate the tilt tube with a water-resistant marine grease.
  • Scour the steering cable telescopic ram with a brass wire brush and wipe until clean.
  • Lubricate the sliding parts of the telescopic ram with water resistant marine grease.
  • Reassemble, making sure all (correct) fasteners are tight and there is no binding or excessive free play in moving parts.

Please note where locking fasteners are used. Don’t use non-locking fasteners; vibration can loosen them and cause steering failure. Steering cables can’t be repaired. If the steering cable is deteriorated, doesn’t move or operates in any manner other than correctly, replace it. The cable for your helm is no longer available, replace the helm, bezel and cable with an appropriate steering kit.

Article courtesy of Dometic/Sea Star.

Neptunus 650F Review

Neptunus 650F 400

By Andy Adams

Over the years Canadian Yachting has had the pleasure of doing several boat review articles on new Neptunus models and we are familiar with the qualities that Neptunus is famous for. They have all been exceptional yachts, but this is the one I would most want to own myself. It’s a personal choice and a matter of taste as to whether you would prefer to have a sedan express model or a flybridge but in my opinion, the flybridge layout offers some wonderful attributes.

We met with Neptunus Managing Director Jan Willem De Jong this past fall to take the new Neptunus 650F out in Lake Ontario. 

Read More


The Other Virgin Islands

Sunset off St John

By Mark Stevens

I was first seduced by the United States Virgin Islands during a ferry ride from St. Thomas to Tortola to begin one of our earliest British Virgin Islands charters nearly twenty years ago.

A perfect sunset off St. John with St. Thomas views for backdrop.

Clearing Pillsbury Sound, surrounded by voluptuous emerald mountains as the ferry sliced through royal blue waters, I was struck by the unspoiled ambiance of St. John, the island gliding past our starboard beam and the irresistible charm of a village called Cruz Bay visible from our quarter stern.

Read More