New products: Harken Single-Acting Integral Backstay Adjuster

Harken Backstay Adjuster

Apr 20, 2022

It’s one of the best things about sailors: we hate to give up on our equipment. But if you’re like a lot of owners of boats with vintage integral hydraulic backstay units, you’ve been putting up with seepage and slippage for too long. We’ve introduced our new integral hydraulic unit to convince you it’s finally time to pull the pins on that leaker and start anew.

Unlike some competitive units, you’ll notice the Harken Single-Acting Integral Backstay Adjuster has no external hydraulic hoses to snag dock lines or lazy sheets and come loose. As you pump the handle, the single-acting pump pushes fluid through a hole gun-drilled inside the stainless rod, to top of the cylinder, creating pressure and backstay tension. A simple pressure-release knob releases that pressure, reducing mast bend. All the fluid stays inside the tube all the time.

Harken’s integral hydraulic backstay adjuster provides the power to optimize sail shape quickly for racers and adjust mast tension for smoother furling for cruisers.

The cylinder features a built-in, single-acting pump. Every unit includes a hardcoat-anodized aluminum cylinder and pump, valve, and stainless pump handle with two attachment options: 1) a roll pin, that when installed, locks the handle permanently, 2) the roll pin can be left off and the handle may be inserted when needed, but stored separately.

Harken Backstay Adjuster

Cylinders include a clevis pin on both ends. A fiberglass position indicator attached to the top clevis pin slides down the cylinder as it’s retracted for repeatable tension settings. Standard eye-jaw toggles fit all Harken cylinders and are recommended on all installations.

The pressure-release knob turns clockwise to close and pump, counter clockwise to release. When closing the pump, the knob cannot be over-tightened by hand, preventing damage to the valve. Release speed depends on how far open the knob is turned. Pressure relief is factory set to prevent crew from over-tensioning the backstay.

The new Harken Integral is designed to be bulletproof and need no nursing for years. That pressure-release knob cannot be over-tightened. Turn it clockwise to close, counter clockwise to open. A very analog, very pragmatic position indicator completes the offering — to make duplicating settings fool-proof.

Harken integral backstay adjusters come in four sizes to fit boats 9 – 18 m (30 – 60′) with stay diameters of 5 – 10 mm (7/32 – 3/8″).

Watch this video for the inside scoop:

Video Gallery

Neptunus 650F Review

Neptunus 650F 400

By Andy Adams

Over the years Canadian Yachting has had the pleasure of doing several boat review articles on new Neptunus models and we are familiar with the qualities that Neptunus is famous for. They have all been exceptional yachts, but this is the one I would most want to own myself. It’s a personal choice and a matter of taste as to whether you would prefer to have a sedan express model or a flybridge but in my opinion, the flybridge layout offers some wonderful attributes.

We met with Neptunus Managing Director Jan Willem De Jong this past fall to take the new Neptunus 650F out in Lake Ontario. 

Read More

Destinations

The Other Virgin Islands

Sunset off St John

By Mark Stevens

I was first seduced by the United States Virgin Islands during a ferry ride from St. Thomas to Tortola to begin one of our earliest British Virgin Islands charters nearly twenty years ago.

A perfect sunset off St. John with St. Thomas views for backdrop.

Clearing Pillsbury Sound, surrounded by voluptuous emerald mountains as the ferry sliced through royal blue waters, I was struck by the unspoiled ambiance of St. John, the island gliding past our starboard beam and the irresistible charm of a village called Cruz Bay visible from our quarter stern.

Read More

Lifestyle