Heating and cooling systems add immensely to cruising comfort, whether you boat in cool shoulder seasons or contend with hot, muggy summers.

Most boaters learn quickly that extending their season is ideal – Canadian summers are so short, whether you’re on the west coast or the Great Lakes. In central areas, summer is short but it can be hot and humid, and winter is too cold for much cruising in all parts of Canada. Extending into spring and fall makes boating so much more enjoyable, to say nothing of helping justify the costs.

The addition of heating and cooling systems aboard is a sensible upgrade that can easily double the effective cruising season. September-October and April-May can bring great cruising weather, often with clear skies, but their lower temperatures mean some technology aboard is needed.
 
Marine Heat

Heating a boat is easier than cooling it thanks to the number of ways we can create heat. Burning a fuel is the easiest. But large boats with the luxury of onboard generators can always use electrical heat. This is often called direct element heat as the electricity is converted to heat directly through a high-resistance element and it is 100-percent efficient. This method works for domestic water as well as for space; it’s clean, efficient and easily controlled. But for those of us who prefer not to use generators constantly, electric heat is not feasible. We need a fuel.

Wallas of Finland has a range of attractive products that combine space and cooking heat thanks to their unique designs of combo heater and domestic stove units. These provide cooking through their stovetop cookers, but also provide space heat for any boat cabin. They burn diesel fuel taken from main tanks. Wallas has a number of products in their line that can be used for stovetop, oven and space heating needs, as well as dedicated forced-air space heaters that burn diesel or kerosene.

Combining a space heat function with domestic hot water is the aim of BC’s International Thermal Research, which markets products under the Hurricane brand. Their hydronic (water-based) system features a diesel-fired marine boiler that heats circulating water and provides hot domestic water for showers, sinks and laundry. With a simple heat-exchange radiator system, the Hurricane heaters also provide space heat. They burn diesel fuel taken directly from the main tanks and need only 12-volt DC to operate.

Other marine heaters from European manufacturers such as Espar and Webasto are also commonly used onboard. These are sophisticated heaters that take diesel fuel from the main tanks and burn it in a small furnace. Unlike the hydronic systems, these furnaces create hot air directly, but they can also be plumbed with a heat-exchange coil to provide domestic water heating or feed small radiators. With technology improvements, these products are now easy to use with a plain on-off switch or a simple thermostat, as easy to use as common home systems.

Manufacturers such as Dickinson offer lines of diesel-burning space heaters. These require a bit more operator involvement to light the fire and adjust the flame, but are able to produce large quantities of reliable heat. We had a Dickinson Arctic heater on our 48’ cruiser for many years and it kept the boat nicely warm in any wintertime temperature that BC offered. These heaters, too, burn diesel fuel plumbed directly from main tanks but they need to be vented properly.  And they work much better if they have a dedicated air supply. Dickinson also has a propane-burning bulkhead heater line.

In all cases, onboard heating systems need to be vented properly and exhausted carefully. Temperatures can get very hot and can endanger the vessel if improperly installed. If your boat does not already have carbon monoxide detectors, they are always advisable anytime there is a direct flame in the heating system.

Marine Cooling

More complicated than heating, cooling a vessel usually calls for a system comprising a compressor and evaporator, circulating fans, pumps and a fair bit of plumbing and electronic controls. Onboard cooling uses the same basic technology as refrigeration. In domestic applications there are many such cooling units commonly called “air conditioning.” Onboard though, these domestic units are impractical so some manufacturers have developed marine variations that are available to operate using electrical current from a generator or from a battery bank through an inverter. However, their electrical current draw is significant, commonly upwards of eight to 10 amps.

These systems take advantage of the latent heat that is released and gathered during the evaporative and condensing cycle of a fluid. All refrigeration and air-conditioning systems use this basic technology. The transmitting fluid must be easily evaporated and condensed – for years the choice was Freon, but it is no longer used, as it is harmful to the ozone in our atmosphere. Now all cooling units use alternatives, the most common being a variant of  “green gas” such as R417 (Isceon 59) or R410A and variants.

This cooling technology actually moves heat from one area to another, hence any cooling unit must exhaust hotter air to the outside, or it must have a cooling coil to dissipate the heat, like any household refrigerator. Any domestic or marine refrigeration unit has a simple cooling coil at the rear of the unit and discharges the waste heat into the room. That’s not an issue in a fridge, as it is cooling inside the unit that is needed.

However, cooling the air in a room or cabin creates a challenge. The waste heat cannot be discharged back into the room, as that would defeat its purpose. Instead, most AC units use the cooling effect of the surrounding water to take away the waste heat. That means another through-hull fitting is needed and plumbing to and from the unit must be installed. This adds to the complexity and costs of installation as well as operation.

One manufacturer sells a portable AC unit that is designed to sit on top of a hatch. It does not require a through-hull as it supplies cooling air downwards into the boat and discharges its waste heat upwards into the atmosphere. Another makes a pure evaporative cooler that blows air through an ice pack. Some 12-volt systems cool moderately by simply evaporating water. However, these systems are not serious AC units as their output is very modest.

Several other manufacturers sell proper marine AC units of varying sizes that need to be permanently installed with electrical and plumbing connections.

The ideal installation uses a system of interior ductwork to distribute the cooling air throughout the vessel. Interior fans can aid this process, as hot air can be stubborn. Owners have also found that a simple exhaust fan near the top of the interior space is the best way to aid cool air circulation. Interior fans that aid circulation help in cooling larger spaces. An added advantage to AC systems is that they dehumidify air as they cool, adding a comfort bonus to boaters in hot and humid summers.

Owners of boats without AC units have found that blowing cool air into a boat is nowhere as effective as exhausting unwanted hot air. Hot-air exhaust fans will remove unwanted heat and then cool air from outside will find its own way in. Several manufacturers offer exhaust fans that are solar-powered so need no electrical connection. Others supply fans that need only small amounts of 12-volt electricity.

Reverse-Cycle Options

AC engineers soon found that a cooling unit could work in reverse and also supply heat. Heat is a waste product in cooling applications but it is a desired product in heating applications. Such units are called heat pumps because that describes their basic operation – they actually pump heat from one side of the system to the other. But the technology is identical to cooling units – they simply operate in reverse.

In domestic and commercial applications this technology has been around for decades and it is reliable and cost-effective. It still requires electrical power, but typical systems can easily produce three times more heat through their heat pump than they would be able to create with a simple direct heating element of the same electrical draw.

In marine applications these units are most often called reverse-cycle heating and cooling units. In one mode of operation they produce space heat. In reverse mode they provide cooling. A number of models are available from manufacturers including Marvair, CruiseAir, Flagship and Climma, among others. A typical small unit needed to cool a 26 to 30’ boat will provide 7,000 to 10,000 BTU cooling in reverse cycle and a similar amount of heat. It uses four to eight amps of current while running, slightly more when the compressor starts its cycle. While the main compressor needs 120-volt AC power, some have auxiliary fans that use only 12-volt DC, saving power use. But this amount of electrical draw still requires a fair-sized battery bank or an onboard generator to provide the current.

The advantages of these systems are many. They run fairly quietly and in one unit they provide heat in the cooler shoulder seasons and cooling for those hot and muggy summer days. They are a bit more expensive than stand-alone cooling or heating units but they save one whole system. Typical prices range from $2,000 up depending on the cooling and heating capacity needed.

Whichever system best suits your specific climate and comfort needs, the addition of heating or cooling equipment to your boat will easily double your effective cruising season, to say nothing of making any boat trip more pleasant.


Heating and Cooling Suppliers
Climma        www.veco-na.com
Cruiseair, Dometic    www.dometic.com
Dickinson    www.dickinsonmarine.com
Espar        www.espar.com
Flagship    www.flagshipmarine.com
Hurricane    www.itrheat.com
Mermaid     www.defender.com
Marvair        www.marvairmarine.net
Webasto        www.webasto.com
Wallas        www.wallas.ca

By Robert Buller

On Monday, Volvo Penta announced the availability of their fully integrated assisted docking system at the Consumer Electronics Show, held virtually this year.
In Part I, Sheryl Shard ended the story at June ...
Boating BC and Canadian Boat Shows announced ...
The 2021 Virtual Toronto International Boat ...
You likely aren’t quite ready to travel yet, but ...
Styles, shapes, pitch and diameter of props are ...

Boat Reviews

  • Prev
Once again, Cruisers Yachts is leading the market for day boats with their new 42 GLS model that ...
Optimized sailing performance and comfortable living – a sweet ride. The expression that came to ...
This is such an exciting time in boating! While we feel very sorry for people whose health and ...
For many, the 2020 sailing year will be one to go down into the books as “different”. With delayed ...
What perfect timing! Beneteau is has just announced their new Antares 11 model for North America ...
Commodore’s Boats is a full-service shipyard with over 50 years of generational history and ...
The Oceanis Yacht 54, younger sister of the Oceanis 62, embodies the innovation that has always ...
Beneteau announces the launch of the latest addition to the Antares range! With a length overall of ...
I had been looking forward to a sea trial aboard the Greenline 33 because I was hoping it would ...
New at the end of 2019, the 58 Salon Express design features large windows to flood the living ...

CY Virtual Video Boat Tours

Virtual Boat ToursWe all love boats and nothing can break us up! So, what better way to spend our time than looking at interesting boats and going aboard in a virtual ride or tour. We have asked our friends at various dealers and manufacturers to help us assemble a one-stop online resource to experience some of the most interesting boats on the market today. Where the CY Team has done a review, we connect you to that expert viewpoint. If you can’t go boating, you can almost experience the thrill via your screen. Not quite the same, but we hope you enjoy our fine tour collection.

 

Read more about the CY Virtual Boat Tours....................

 

Cruisers Yachts 42 GLSBy Andy Adams

Once again, Cruisers Yachts is leading the market for day boats with their new 42 GLS model that premiered at the Fort Lauderdale Boat Show at the end of October. The concept of a large day boat is now a very well-established trend made possible by the amazing new power and efficiency of the latest four stroke outboards.

Buyers are looking for a different boating experience and we think that the 42 GLS nails it. Fast, handsome and versatile, the 42 GLS is designed for fun and adventure.

Read More

Destinations

  • Prev
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...
Ontario’s best-kept secret, the Trent-Severn Waterway National Historic site holds the key to ...
Located on the sunny south shore of the harbour, the Marina is on pilings over the water, offering ...
The approach to the Chemainus Municipal Dock from Stuart Channel is straightforward and is ...
I leaned my head back into the water and floated easily. Having spent my childhood playing in ...
History: right after gym and just before chemistry class. Fifty minutes of naming the prime ...
On May 19, the New York State Canal Corporation today announced an updated opening schedule for the ...
If you have four hours to enjoy a fine tour of one of Canada’s most interesting waterways (let’s ...
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...

 

Bahamas - There and Back Again IIIn Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were once again joined by friends.

This time it was Noel and Tracey Dinan, whose new shallow-draft Allures 49.5 was in build at the time, we headed north from the Exumas across the expanse of the Great Bahama Bank, dodging coral patches as we sailed to Eleuthera then Marsh Harbour, Great Abaco. Another commercial centre in the islands, we cleared out of the Bahamas here after provisioning for our offshore passage up to the Chesapeake Bay on the US mainland and out of the Hurricane Zone until mid-November...

Read More

Lifestyle

  • Prev
OK, stop the presses. This photo just came in from Beacon Bay. Clearly those folks know how to get ...
Back in the day, the publisher of a magazine would receive a bound copy of the year’s monthly ...
Boaters on BC’s West Coast have heard the story of the garbage pickers of the Marine debris removal ...
Skipper John “Drew” Plominski is hoping that lightning doesn’t strike twice. Plominski, whose boat ...
The Association provides a forum for exchanging information, tips and access an advocate on behalf ...
Kristin Cummings, Operations Manager at Beacon Bay Marina took this shot after the skies broke ...
Our Photo of the Week (two, in fact) comes from New Zealand where the second America’s Cup AC 75 ...
The Marine Debris Recovery Initiative (MDRI), a collaboration with the Clean Coast, Clean Waters ...
The International Joint Commission (IJC) is reviewing Plan 2014 and could use your help. The plan ...
The Council of the Great Lakes Region (CGLR), thanks to funding from Environment and Climate Change ...

DIY & How to

  • Prev
Styles, shapes, pitch and diameter of props are widely discussed on online boating forums, YouTube ...
There’s nothing worse than wondering how much fuel you have on board. You’re left wondering how ...
As the cold approaches, shrink-wrapping is a hot topic, and I’ve heard more than a few debates at ...
“They don’t make ‘em like they used to”, is a phrase that many of us are familiar with. Most of the ...
I’m on many different types of boats, with many configurations. Some have a single ...
I often get asked if regular care and maintenance is necessary for inflatable PFDs. Here is a ...
Labour Day weekend tends to be the ‘last hurrah’ on many fronts: the last long weekend of the ...
One of the Great Lakes’ best known tall ships, sail training vessel TS Playfair, will soon be ...
My Dad is not a mechanical guy. He is educated and well-read, and handy around the house – but not ...
I was cleaning up my workbench the other day. My eyes then scanned across my workbench and fell on ...

WinterizationBy Andrew McDonald, Lakeside Marine Services

“They don’t make ‘em like they used to”, is a phrase that many of us are familiar with. Most of the time it is in reference to a bygone era of better, and it’s used to lament the sorry state of what we have today. It is a phrase that can be applied to many areas of our lives: architecture, art, furniture, tools. Boats? I would argue that they don’t make them like they used to. But, is that lamentable, or is it progress?

Progress, I think. With this concept in mind, as we enter another season of putting boats to bed for the winter, why do we winterize as we always have?

Read More

 

  

Marine Products

  • Prev
On Monday, Volvo Penta announced the availability of their fully integrated assisted docking system ...
Perhaps the ultimate audio solution for boat owners, the JBL by Harman BassPro Go from Prospec ...
It only takes one foggy, disorienting day on the water to make a boat owner understand the value of ...
It’s a voyage everyone wants to undertake, but few get to make. The Whales of Lake Erie is the ...
Over the years I have had a real soft spot for the Jeep Wrangler line of models. Recently I had the ...
Wait no longer, the 2021 Rideau Canal & Lower Ottawa River PORTS Guide has returned! Purchase ...
The Tundra 65 is Yeti's most versatile cooler, just as adept at keeping catches cold as it is ...
Fireball self Extinguisher. It's a revolutionary self-detonating device designed to extinguish a ...
The problem with driving any full-size Pickup Truck or Sport Utility Vehicle is that when you are ...
Wait no longer - the 2021 Rideau Canal & Lower Ottawa River PORTS Guide will be available for ...