June 9, 2022

Sails are attached to the sailboat rig using several different systems. Let’s begin with mainsails.

The most basic attachment is with a boltrope that fits into a mast groove. This is very secure, and the sail is very well supported along the luff edge. It is also simple to build, and it makes the sail easy to recut the luff curve if you are racing and expect to have lots of sail modifications done over time.

See Figure 1 – Boltrope in spar
Boltrope in Spar


 

 

 

 

 

 

 

 

 

 

 

Fitting a boltrope to a mast is all about size and whether you go with soft rope or hardbraid. Soft rope is the most common, either spun polyester 3-strand, or various coloured polypropylene 3-strand. This is an inexpensive option, and easy to work for the sailmaker. It is far easier to hoist a hardbraid boltrope, but it is bulkier to handle and more expensive to install.

For race sails, by far the most popular fitment is for boltropes, the best choice is the hardbraid if you expect to use the sail for more than a season.

See Figure 2 – Hardbraid Boltrope

Hardbraid Boltrope


 

 

 

 

 

 

 

 

 

 

 

Masts that work with boltrope, will often (but not always) work with Slugs or some Specialty (Selden type) slides. Here I will throw some terminology at you, slugs are round like rope, and slides are flat, or at least flat(ish).

Figure 3 – Slugs are Round, and Slides are Flat

Slugs and Slides


 

 

 

 

 

 

 

 

 

 

 

Slugs are generally fit based on diameter and waist width.

Figure 4 – Slug Diameter Measuring
Slug Diameter Measuring

 

 

 

 

 

 

 

 

 

 

 

The Specialty Slides are more complicated and very mast specific. When in doubt, go with a slug instead, as both will likely work.

Figure 5 – Specialty Slide Width Measuring
Specialty Slide


 

 

 

 

 

 

 

 

 

 

Figure 6 – Specialty Slide Waist Measuring
Specialty Slide Waist Measurement


 

 

 

 

 

 

 

 

 

 

 

Masts that take flat slides, generally only work with slides. Boltropes won’t go up the groove, and the slide width and waist measurements are what is needed to fit them.

Figure 7 – Slide Width Measuring
Slide Width Measurement


 

 

 

 

 

 

 

 

 

 

Figure 8 – Slide Waist Measuring
Slide Waist Measurement


 

 

 

 

 

 

 

 

 

 

There are also old-fashioned slides that fit on a metal track outside of the mast. These are getting more and more uncommon to see. These slides work in two ways, they either work well or they don’t. It isn’t recommended to attach them to full length battens either as the added torque moment of the batten can bend the track or slide.

Figure 9 – External Slide Measuring
External Slide Measuring


 

 

 

 

 

 

 

 

 

 

There are some other attachments like we see on dinghies like the Laser Sleeve luff, or mast hoops or lashings on a traditional vessel or a dinghy like an Optimist pram. This is in no way an exhaustive list but should help you understand the varied options for mainsail attachments. All these systems can easily be retrofitted over to a low friction system like Tides Strong Track which is custom made to fit your exact mast groove or external track.

Keven PiperFor more details and Sail Technology, find Keven’s column in Sailing in Canada

Keven Piper, two-time Shark 24 World Champion, founded Hamilton, ON-based Bay Sails in 1998. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

 

 

 

 

 

 

 

 

 

 

Related Articles

Tuesday, 23 November 2021 20:02

Over the last decade, sailcloth weaving equipment has evolved and allowed the production of low crimp warp oriented woven cloth of medium to heavy weights. We have had light weight warp wovens of...

Wednesday, 27 October 2021 00:17

Last issue we covered most of the different materials used for protective covers, and these durable materials require special care. So, how often should you wash your sails and sail covers? As...

Boat Reviews

  • Prev
When we arranged to interview the designer and manufacturer to write a profile of the X Shore Eelex ...
Last August, we were again invited to the Neptunus Yachts facility in St. Catharines, Ontario to ...
Cruisers Yachts’ 34 GLS is the latest model in the Cruisers Yachts line that includes a dozen ...
On a beautiful summer morning in July, I hopped aboard a new-owner delivery from the Outer Harbour ...
When company founder Marcio Schaefer designed the Schaefer 303, he managed to really dial in the ...
There is an unmistakable look to the Azimut S6 Coupe that will stand out in almost any marina. The ...
No longer an outlier or a flash-in-the-pan idea, electric boating is fast becoming a viable ...
Sea-Doo’s all-new Switch marries the performance of a personal watercraft with the versatility of a ...

Video Gallery

 

 

X Shore Eelex 8000By Andy Adams

100% Electric performance available now

When we arranged to interview the designer and manufacturer to write a profile of the X Shore Eelex 8000 for the June 2021 issue of Canadian Yachting magazine, it was on the understanding that we always prefer to actually drive and experience the boats we write about, and we were especially keen to drive the X Shore when BCI Marine here in Canada, got their first boat from Sweden.

There has been a lot of media attention around everything electric lately, especially electric vehicles, but so far, most electric boats are a concept, not yet a reality. The X Shore Eelex 8000 is a reality and a very impressive one at that.

Read More

 

 

 

Neptunus 650EBy Andy Adams

Last August, we were again invited to the Neptunus Yachts facility in St. Catharines, Ontario to run and review their latest yacht, a 202650E at their marina by Lake Ontario. Keen readers of Canadian Yachting might recall reading about a Neptunus 650 back in 2016 and while this is the same proven hull, Neptunus is a custom builder and the 2022 650E here has a totally new interior design and layout.

Neptunus builds bespoke yachts. The reality is that no two Neptunus Yachts are the same. Each is individually tailored to its owners tastes and activities and is finished to their specifications. 

Read More

Destinations

  • Prev
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

Marianne ScottBy Marianne Scott

Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria grew overnight into a tent city when hordes of prospectors stopped by to provision for their quest to get rich in the Fraser goldfields. The tents were followed quickly by brick hotels, stores and brothels. Prince Rupert began as a tent town after it was chosen as the Grand Trunk Pacific Railway’s terminus, then built more permanent structures.

But no place went up overnight like Ladysmith, where coal baron James Dunsmuir moved his miners “stock, lock and barrel” after coal seams further north on Vancouver Island had been exhausted.

Read More

Lifestyle

  • Prev
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
Things are busy on the Trent already and it’s barely June. Mike Gridley sent us this shot last ...
From cottage boats to luxury cruisers, there have been a host of major design changes over the past ...
Thanks to Louise from Gyles Sails and Marine for catching us up on this weekend’s massive parts ...
The marine industry provides exciting opportunities for Canadians. Every month CYOB will introduce ...
There are two POTWs this time. The reason? Guilt. We are picking up the first one from the internet ...
So, I’m at Mobility Cup in Nepean, across the river from Ottawa. I’ve participated in Mobility Cup ...
Emirates Team New Zealand, who introduced foiling to America’s Cup competition in 2012, is ...
Our own Ask Andrew ‘floated his Fanny down the Ganny’ in the annual boat race held on Ganaraska ...
While there’s all kinds of discussion, particularly in NZ, about the plan to defend the 37th ...

Marine Products

  • Prev
The little darlings can’t wait to get on the boat. Just make sure they have properly fitting PFDs ...
With a bold, fresh look and key features, the new JBL-R4500 is the latest in the WAKE Series of ...
When the twist-type connector was invented in 1938, production boats were made of wood and didn't ...
Luxor Marine & RV products offer boat owners an innovative architecturally pleasing range of ...
The club's first digital guide is the collaborative effort of dozens of CCA members and now ...
The days are lovely and what better way to celebrate than heading to the engine compartment. Here ...
While collapsible bimini tops offer boaters a welcome escape from direct sun, deployment and ...
Volvo Penta is launching its Assisted Docking system as a retrofit upgrade for many yacht owners ...
Don’t let offshore emergencies turn into disasters. SeaKits help to prepare you for emergencies at ...
It’s one of the best things about sailors: we hate to give up on our equipment. But if you’re like ...

News

  • Prev
Hello Lake Ontario Boaters. As you know, the much anticipated PORTS Lake Ontario Guide is in ...
Watching whales and other marine mammals in their natural surroundings is exciting. It gives us an ...
Tom Brady couldn’t have thrown a better spiral. This is a shot of my handsome son, Will, carrying ...
A strong contingent of 28 Canadian sailors, including Tokyo 2020 Olympians Ali ten Hove, Mariah ...
Wellcraft teamed up with American naval architect, Michael Peters, and talented yacht designers, ...
Following success in the Nordics and New Zealand, Skipperi is coming to Toronto with 15 new, fully ...
Candela, the Swedish company that is revolutionizing electric boating with its hydrofoiling ...
Scrub Island Resort, Spa & Marina has announced plans for the addition of a new petrol station ...
SailGP, the international racing series featuring high speed F50 wingsailed catamarans, is ...
First, they were closed - as of May 2, many of the Canada Border Services Small Vessel Reporting ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More