Thrusters 400…and less embarrassing!

By Andrew McDonald

Corners like it’s on rails. You can almost see it. A car with a low centre of gravity takes a curve. The driver shifts through the gears and exits the bend with speed and grace. Stops on a dime. That same vehicle smoothly downshifts and comes to a complete stop as though hitting an invisible barrier.

Most of our sailing metaphors evoke thoughts and feelings of strong winds pushing a sleek racer faster, or perhaps the crew tacking or gybing around a mark. We don’t seem to have the same colourful expressions to describe the movement of a power or sailing vessel at slow speeds. Poetic statements aren’t being made about pulling away from dock on a misty morning, or tying off when returning at sunset. Shouldn’t there be? The boat moves with, or against the wind. It sneaks into dock like a thief in the night. Turns with the barest touch of the helm. Or perhaps, Spins like she has thrusters.

The advantages of thrusters

mounting 400By incorporating bow and stern thrusters, a boat with a single engine can move as easily from side-to-side as fore and aft. A large boat in a crowded slip can be ‘wiggled’ into tight spaces, and maneuverability is possible without touching the wheel. 360-degree spins are possible, as is the ability to move the boat sideways. Systems can be installed in a variety of configurations, and gone are the days of having to buy a boat with a thruster installed by the builder; boat yards are becoming highly adept at aftermarket installations and some DIY projects are well within reach.

Note how far forward the unit is mounted, and the lack of holes below the waterline

In the golden days of shipping, port pilots and tugboats were the normal methods of moving large ships into tight docking spaces for loading/unloading. In order to reduce costs, maneuvering thrusters became the norm. Today, what is common amongst large ships has now been popularized aboard pleasure craft.

When most of us imagine a bow or stern thruster aboard a yacht, we have a picture that includes thought-bubbles and dollar signs. The word ‘thrusters’ is equivalent to a higher price. But with the evolution of technology, the inventive ways that thrusters are mounted and used, and with growing competition in the marketplace, is this as true today as it was a decade ago? I would argue that there’s a thruster for everyone.

externally mounted thruster 400This begs the question: With the obvious advantages of maneuverability and confidence, why doesn’t every boat come equipped with bow and stern thrusters?

This Bayliner is proudly sporting an externally-mounted thruster.

When thrusters first became popular aboard yachts, they were designed and installed by the builder. Over time, boat yards became adept at installing thrusters as aftermarket add-ons, drilling a 4-8” hole in the bow or stern below the waterline, fibreglassing in a tunnel with attached electric motor and impeller, and then connecting in the battery, cables, relays and control switches.

For many, this is a daunting DIY task that requires specialized tools and expertise to install well. But, with changes in technology, the sizing and power options are almost as numerous as the installation and mounting methods available.

Some recent innovations mean that a thruster is no longer just a thruster. Each manufacturer has been trying to differentiate themselves with differing designs and features. I spoke with Vetus (one of many thruster manufacturers) about some of the innovations on the market today:

 - 48V switching for greater thrust – gone are the days of simple 12V power

 - Proportional control – meaning that the speed or force can be controlled, rather than simply switched on and off

 - Up to 400mm impeller sizes (15 ¾”) for a wide range of boat sizes and types

 - Brushless motors – which prevents overheating and allows the unit to run continuously as long as the battery is sufficient to support the run time

thruster graphic 400Beyond some of the innovations in conventional tunnel-style thrusters, there are significant differences in modern design. Jet Thruster has introduced a thruster that utilizes water-jet technology instead of a turning propeller. This design draws water into the unit using a specialized pump and then forces it out under pressure on either port, or starboard sides. The pump can accommodate bow and stern openings (a single, centrally-mounted pump can control jets at both bow and stern).  In addition to working on conventional boats, Jet Thrusters can work in unconventional hull types. Trimarans and catamarans can accommodate a jet thruster where a tunnel-style thruster is impractical. Because the Jet Thruster incorporates a resevoir and holds seawater to deliver the thrust, a winterizing component is necessary that isn’t needed in tunnel-style thrusters.

A Canadian company called Sideshift has created a thruster that is much more practical for the do-it-yourselfer. Their units are externally mounted, with no holes in the hull below the waterline. A single 3/8” hole is drilled to accommodate wiring, located above the waterline. Their niche has been in direct sales to consumers; kits including everything needed for installation (including caulking and thread locker), with the exception of a battery and main battery cable. They’ve also developed a reliable wireless helm remote, which avoids the difficulty of running added cabling from the unit to the helm. Sideshift has also developed a retractable unit that is designed to be mounted to the underside deck of pontoon boats – a hull style that isn’t compatible with more traditional thrusters. Sideshift considers their units maintenance-free and they require only annual anode replacement.

interior view 400It’s clear that there is indeed a thruster for everyone. The benefits are considerable; maneuverability and confidence are the key standout features. Brand, style, size, power, installation options/cost, and maintenance are the factors to consider when choosing to buy a boat (new or used) with a thruster installed, or when installing an aftermarket unit.

Interior view showing the motor unit on top of a fibreglass tunnel, joined to the vessel's hull. This unit is located beneath the v-berth on a 34' cruiser.

Here are a few great resources to check out as you consider thrusters for your boat:

Vetus – how to select, design and build your thruster selection –https://www.youtube.com/watch?v=cAFnq3ejf9w

Jet Thruster – check out this video on both the concept and installation of a jet thruster system -  https://www.youtube.com/watch?v=JLDuwnnOCcY  -.

Sideshift Thrusters - This is the YouTube page for Sideshift.  -  https://www.youtube.com/user/sideshift05 -

exterior view of a tunnel 400Conclusion

Speak to your dealer or service technician about your boat. The cost may increase the value of your boat significantly and the performance could be an amazing added bonus.

And, watch for more editorial information in upcoming issues of Canadian Yachting where we will explore more about thrusters, DIY projects and related accessories to make docking and boat handling easier and more enjoyable.

Right: Exterior view of a tunnel-style thruster.

Below: the associated wiring: battery, fuse, and on/off switch. 

associated wiring 400

Related Articles

Wednesday, 21 November 2018 01:37

Recently I suggested doing an off-season (winter) project with a potential client, and my suggestions was met with surprise; surprise that she wouldn’t have to move her boat, and not have to worry...

Thursday, 03 January 2013 15:57

There are two kinds of people; those who have thrusters and those who want them! Recently, I was having a conversation with Jon Moles from Toronto Yacht Services and he mentioned how much consumer...

Wednesday, 09 August 2017 02:52

The moment we all dread. It’s a warm sunny day and you’re out for a cruise. Suddenly the boat shudders beneath you, pings, dings and clangs are heard and you realize that you’ve hit something...

Tuesday, 10 April 2018 23:59

All engines, including marine engines (inboards, outboards and stern drives) have many moving parts that need to be lubricated by oil in order to allow metal parts to move with as little friction as...

Tuesday, 11 July 2017 07:16

For most of us – this is the time to make the most of the boating season – launch and set up are done. Systems have been recommissioned. Let the fun begin!

Wednesday, 26 March 2014 11:47

Joystick-operated bow and stern thrusters from Sideshift make docking and other close maneuvers safe and simple. For further convenience, enhanced boat control now rests in the palm of one's hand,...

Boat Reviews

  • Prev
The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and ...
Boats have been in high demand for the past two years and there’s no sign of this easing. ...
When we arranged to interview the designer and manufacturer to write a profile of the X Shore Eelex ...
I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats ...
The weather wasn’t cooperating for our test of the new Fountaine Pajot Isla 40. Rain, storm clouds ...
Last August, we were again invited to the Neptunus Yachts facility in St. Catharines, Ontario to ...
Cruisers Yachts’ 34 GLS is the latest model in the Cruisers Yachts line that includes a dozen ...
On a beautiful summer morning in July, I hopped aboard a new-owner delivery from the Outer Harbour ...
When company founder Marcio Schaefer designed the Schaefer 303, he managed to really dial in the ...
There is an unmistakable look to the Azimut S6 Coupe that will stand out in almost any marina. The ...

Video Gallery

 

 

Viko S35

By Katherine Stone

I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats on champagne fall days when many boats are either being hauled for the winter, or are already under shrink-wrap.

Not only are there great winds – usually offshore, but welcome sunshine and open waters with few boats out enjoying the last days of September. Joining me for the test sail of the Viko S35 was the former publisher of Canadian Yachting, Greg Nicoll, and the Canadian Viko Yachts representative, Eric Beauregard, who had driven down from Montreal.

Read More

 

 

Four Winns H4

 

Four Winns H4By Andy Adams

The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and the new H4 is a great example of how the design and engineering resources of Beneteau can up the game even for a brand like Four Winns that has a long and distinguished history.

The Cadillac Michigan-built H4 is a brand-new design this year and we think it's especially handsome. The vertical stem bow is all new and innovative. It is a design feature that was chosen to give Four Winns and the H4 a sense of modern and contemporary look while the stern remains more traditional. 

Read More

Destinations

  • Prev
It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul ...
Cowichan Bay is a waterfront village with a row of shops, artisan products, marine supplies and a ...
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

West Side Story

by Jennifer M. Smith, drone photos by Alex Nikolajevich

It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul out was still over a month away. The question was: where to now? Friends in Meaford often suggested we sail in for a visit. We never had because we’d always moved north-south on the east side of Georgian Bay. This year we were up for something different. This was the perfect opportunity to cruise the west side of the bay.

We made the 10 a.m. bridge out of Little Current and motor-sailed east southeast in light northerlies. We’d often sailed past Snug Harbour, a nearly land-locked anchorage on the north side of Lansdowne Channel because the chart suggested we’d never make it in there with our six-foot draft. 

Read More

Lifestyle

  • Prev
This week’s Photo of the Week comes from BC. The 99th Grey Creek Regatta was held at the Lakeview ...
Back in 2019 (I believe) your magazine used a pic of Sweet Love, a Ranger Tug 31, in a photo ...
a few shots of my wife Maggie practicing her silks routine on our 1982 C&C in the North Channel ...
Last issue, we took a look at boat names. Little did we know we would get what probably will be the ...
Boat names and puns go together like …. Well, like nothing else. Here’s a couple shared by our pal ...
Frequent Windsor racing contributor to Sailing in Canada Roger Renaud, caught this gorgeous ...
The Kingston Yacht Club (KYC) celebrated its 125th anniversary in the summer of 2021, in all the ...
A study on water levels projects an unprecedented drop of water levels on Lakes Michigan-Huron and ...
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
You’ve invested thousands and thousands of dollars into your boat so naturally, you want to find ...

Marine Products

  • Prev
What happened. Where did our summer go? Well, never mind that, it’s time to start thinking about ...
Cruising boaters visiting new destinations can face challenges when the marina's shorepower system ...
Worn plastic hatch covers can detract from a boat's appearance and its functionality, especially ...
The first builder of electric boats, founded in 1893, Elco now introduces new designs of its EP-6, ...
More than 3/4 of all recreational boats (power and sail) are under 26 feet and towable.
One of the top requests in the electrification of water transport is for a jet ski that can deliver ...
Many boat toilets have dimensions similar to a five-gallon bucket—and are nearly as uncomfortable. ...
Working alongside a US-based designer and boat building company, Burlington ON-based MarsKeel ...
It’s still vacation time and that means calories don’t count. The Boat Galley Cookbook: 800 ...
Words of exasperation wafting across a marina often signal a boat owner fighting with a jammed ...

News

  • Prev
Parks Canada advises that the Kirkfield Lift Lock will begin single-chamber lockages for through ...
The Four Winns TH36 Catamaran had its world premiere at the Cannes Yachting Festival, September ...
After borrowing boats for a couple of years, longtime J105 fanatic and many-year organizer of the ...
Due to ongoing mechanical issues, the Kirkfield Lift Lock will remain closed for the foreseeable ...
BCI Marine is announcing that it will become Canada's distributor of OXE Marine's ...
US Team Zing’s increased boat speed and improved crew work were no match for the extraordinary crew ...
Vision Marine, founded in Montreal and currently based in Boisbriand QC, in partnership with ...
On Sunday, August 21, the Royal Canadian Yacht Club (RCYC) held its fourth annual ...
While there’s still some good weather left, let’s take a moment to celebrate this summer. Sunny, ...
Light air conditions prevented racing on Saturday, which meant there were three fleet races on ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More