June 23, 2022

Sailboat RigBy Marc Robic

I was recently reading a number of Facebook posts from sailboat owners’ groups, wondering why their cabin doors and cupboards were no longer opening properly. Either rubbing on the door frame or getting stuck in the frame. And this, after a haul out or after launching and stepping the mast. To my horror, some well intentioned comments recommended everything from sanding down the door edges, to cutting a little off the door frame or door edges, etc., including one that recommended removing the finish trim around the door frame.

All these helpful commentators surely meant well, but these recommendations should be completely ignored, or, at the very least, not considered as a first resort. Misaligned doors and cabinetry are generally a symptom… not the problem.

First and foremost, understand that most materials used to manufacture boats, such as plastics, teak & mahogany, are all materials that not only resist the marine environment, but will also rarely shrink or swell. So before sanding or cutting anything off, consider the following first.

All boat builders engineer boats to work properly by design, including material selection and “real world” anticipated utilization of the boat. Meaning, the boats are designed to work, doors and all, while under all conditions (under sail, under power and on the cradle or trailer).

Of course, despite engineering, all bets are off if the boat is not properly tuned (rigging) or set on the cradle or trailer properly.

Tuning affects everything

Tuning refers to setting the proper tension for each shroud and stay according to either the manufacturer’s specifications or the shroud/stay diameter. Although there is a certain tolerance range, a mistuned rig can not only risk a catastrophic failure at the worst possible time, but can also torque (or twist) the boat itself to such extent as causing misalignment of cabinets and doors.

A shroud tensioner gauge is a great tool to have on hand when re-stepping and tuning up the mast in spring. The good news is that many fellow sailors or club members have a gauge you can borrow! Or buy your own. It’s a good investment. I know some sailors who got together to share the cost of buying one. Some sailing or yacht clubs have one or more on hand for members to use.

Shroud Tension Gauge

 

 

 

 

 

 

 

 

 

 

 

 

Even if you keep your mast stepped all year, checking and adjusting the tension at least once a year should be on your maintenance “to do” list.

Keeping the mast up all year? If your boat gets hauled out for winter, you need to take the tension out of all shrouds and stays. As the cold sets in, these stainless-steel cables will contract. If kept under tension during cold winter months, and depending on contraction rate, the shrouds and stays can not only stretch but can also break. The chainplates can also be damaged, causing a risk of rig collapse. I have seen this happen at my own yacht club, where the shrouds shrunk and snapped, pulling out one of the chainplates and giving way for the mast to collapse onto three other nearby boats. Not a pretty or fun experience to deal with. If your boat stays in the water all winter, covered up, like many on the west coast, the tensions should be removed as well.

Tension should also be taken out of lifelines for the same reason. They can damage the bow or stern rails or bend the stanchions inward.

There is a scale for each diameter with its breaking strength. For example, a 3/16” diameter shroud has a 4,700 lbs breaking strength. From the scale, the shroud should be set to 500 lbs tension or roughly 11% of the breaking strength. The forestay would normally be more, around 750 lbs of tension.

Cable Breaking Strength Scale

 

 

 

 

 

 

 

 

 

 

 

 

There is also a proper sequence when tensioning shrouds and stays. This sequence ensures the mast is straight and centered, even if a bend (toward aft) is set for performance and sail cut.

Once the mast is stepped, the fore and aft stays should be attached and hand tightened only. If a furler is involved, only the rear stay should need to be tightened. Next, the upper most outer shrouds are hand tightened and set to make sure the mast top is in the middle (centered) of the boat using the halyard to measure the distance from the mast to a spot on the deck that is equal on both sides. A stanchion base is a good spot, but not the top of the stanchion as one may be bent. Once satisfied the mast is centered, use the tension gauge and adjust to the proper tension making sure to only make half turn turnbuckle adjustments at a time on each side of the boat. This will keep the top of the mast centered.

The inner shrouds would be next. Again, adjusting half turns at a time on each side to keep the middle of the mast centered.

Cable Tension GaugeThe forward and aft shrouds would be next, if so equipped. To ensure a proper upper mast bend, the forward shroud tension should be more than the aft shroud. Using the 3/16th shroud diameter example, the forward shrouds should be set to the next gauge setting down, around 460 lbs (17 on the sliding marker) and the aft shroud between 380-400 lbs (about 15 on the sliding marker). With the boat now properly tuned, not only will she sail better, but most likely, all your doors and cabinets will open and close much better.

IMPORTANT: Please keep in mind that the aforementioned process, tensions, values, etc, are solely based on the writer’s own experience and knowledge, and therefore the writer and publisher can not assume any responsibility if these are applied without proper research. As each boat is different, as well as sailing conditions and environment, the responsibility falls solely on each boat owner to consult and research on what the proper tensions and set-up is specific to their boat and apply those. A notable source of information is Facebook, where there are many groups by make and model.

Next time – cradle tips - yikes, another way to mess up your doors opening!

Marc RobicINFORMATION about the writer: Marc is a member of the Canadian Power & Sail Squadron. He and his wife sail their Catalina 270, Aquaholic 3, out of the Ile-Perrot Yacht Club in Montreal, where Marc spent 16 years as Harbour Master. They are regular Caribbean bareboat yacht charterers. With over 40-years experience, Marc is also an avid onboard do-it-yourselfer.

Marc Robic
This email address is being protected from spambots. You need JavaScript enabled to view it.

Related Articles

Tuesday, 22 June 2021 16:05

As bareboat charterers for many years now, most boats we’ve had the pleasure of renting had an electric head. Much to our enjoyment and that of our fellow passengers, they are super simple to...

Tuesday, 06 April 2021 15:36

The desire or rather, the argument, to convince my wife (AKA First Mate) to convert our icebox to a fridge came after our first two trips onboard our Catalina 270, Aquaholic 3, up to the Thousand...

Wednesday, 11 August 2021 04:00

If chartering is something you’ve been dreaming about, this 3-part article is really for you and I hope will encourage you to give it a try... BUT be forewarned...it can be addictive!

Wednesday, 27 January 2021 00:17

This area is where YOU get to express your opinions. That can include your thoughts on articles in our Digest or on any boating matter. This issue’s piece comes from Marc Robic. Marc is a...

Tuesday, 25 May 2021 16:39

Last issue we got up with Montreal sailor Marc Robic who has accumulated a lot of tips and tricks for prepping your boat, especially as we emerge from lockdown.

Tuesday, 11 May 2021 17:39

Spring has finally sprung! At least it has weather wise here in Montreal, so it is with great anticipation and boyish giddiness that I loaded the car with all the “things” I will need for this...

Boat Reviews

  • Prev
When we arranged to interview the designer and manufacturer to write a profile of the X Shore Eelex ...
Last August, we were again invited to the Neptunus Yachts facility in St. Catharines, Ontario to ...
Cruisers Yachts’ 34 GLS is the latest model in the Cruisers Yachts line that includes a dozen ...
On a beautiful summer morning in July, I hopped aboard a new-owner delivery from the Outer Harbour ...
When company founder Marcio Schaefer designed the Schaefer 303, he managed to really dial in the ...
There is an unmistakable look to the Azimut S6 Coupe that will stand out in almost any marina. The ...
No longer an outlier or a flash-in-the-pan idea, electric boating is fast becoming a viable ...
Sea-Doo’s all-new Switch marries the performance of a personal watercraft with the versatility of a ...

Video Gallery

 

 

X Shore Eelex 8000By Andy Adams

100% Electric performance available now

When we arranged to interview the designer and manufacturer to write a profile of the X Shore Eelex 8000 for the June 2021 issue of Canadian Yachting magazine, it was on the understanding that we always prefer to actually drive and experience the boats we write about, and we were especially keen to drive the X Shore when BCI Marine here in Canada, got their first boat from Sweden.

There has been a lot of media attention around everything electric lately, especially electric vehicles, but so far, most electric boats are a concept, not yet a reality. The X Shore Eelex 8000 is a reality and a very impressive one at that.

Read More

 

 

 

Neptunus 650EBy Andy Adams

Last August, we were again invited to the Neptunus Yachts facility in St. Catharines, Ontario to run and review their latest yacht, a 202650E at their marina by Lake Ontario. Keen readers of Canadian Yachting might recall reading about a Neptunus 650 back in 2016 and while this is the same proven hull, Neptunus is a custom builder and the 2022 650E here has a totally new interior design and layout.

Neptunus builds bespoke yachts. The reality is that no two Neptunus Yachts are the same. Each is individually tailored to its owners tastes and activities and is finished to their specifications. 

Read More

Destinations

  • Prev
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

Marianne ScottBy Marianne Scott

Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria grew overnight into a tent city when hordes of prospectors stopped by to provision for their quest to get rich in the Fraser goldfields. The tents were followed quickly by brick hotels, stores and brothels. Prince Rupert began as a tent town after it was chosen as the Grand Trunk Pacific Railway’s terminus, then built more permanent structures.

But no place went up overnight like Ladysmith, where coal baron James Dunsmuir moved his miners “stock, lock and barrel” after coal seams further north on Vancouver Island had been exhausted.

Read More

Lifestyle

  • Prev
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
Things are busy on the Trent already and it’s barely June. Mike Gridley sent us this shot last ...
From cottage boats to luxury cruisers, there have been a host of major design changes over the past ...
Thanks to Louise from Gyles Sails and Marine for catching us up on this weekend’s massive parts ...
The marine industry provides exciting opportunities for Canadians. Every month CYOB will introduce ...
There are two POTWs this time. The reason? Guilt. We are picking up the first one from the internet ...
So, I’m at Mobility Cup in Nepean, across the river from Ottawa. I’ve participated in Mobility Cup ...
Emirates Team New Zealand, who introduced foiling to America’s Cup competition in 2012, is ...
Our own Ask Andrew ‘floated his Fanny down the Ganny’ in the annual boat race held on Ganaraska ...
While there’s all kinds of discussion, particularly in NZ, about the plan to defend the 37th ...

Marine Products

  • Prev
The little darlings can’t wait to get on the boat. Just make sure they have properly fitting PFDs ...
With a bold, fresh look and key features, the new JBL-R4500 is the latest in the WAKE Series of ...
When the twist-type connector was invented in 1938, production boats were made of wood and didn't ...
Luxor Marine & RV products offer boat owners an innovative architecturally pleasing range of ...
The club's first digital guide is the collaborative effort of dozens of CCA members and now ...
The days are lovely and what better way to celebrate than heading to the engine compartment. Here ...
While collapsible bimini tops offer boaters a welcome escape from direct sun, deployment and ...
Volvo Penta is launching its Assisted Docking system as a retrofit upgrade for many yacht owners ...
Don’t let offshore emergencies turn into disasters. SeaKits help to prepare you for emergencies at ...
It’s one of the best things about sailors: we hate to give up on our equipment. But if you’re like ...

News

  • Prev
Hello Lake Ontario Boaters. As you know, the much anticipated PORTS Lake Ontario Guide is in ...
Watching whales and other marine mammals in their natural surroundings is exciting. It gives us an ...
Tom Brady couldn’t have thrown a better spiral. This is a shot of my handsome son, Will, carrying ...
A strong contingent of 28 Canadian sailors, including Tokyo 2020 Olympians Ali ten Hove, Mariah ...
Wellcraft teamed up with American naval architect, Michael Peters, and talented yacht designers, ...
Following success in the Nordics and New Zealand, Skipperi is coming to Toronto with 15 new, fully ...
Candela, the Swedish company that is revolutionizing electric boating with its hydrofoiling ...
Scrub Island Resort, Spa & Marina has announced plans for the addition of a new petrol station ...
SailGP, the international racing series featuring high speed F50 wingsailed catamarans, is ...
First, they were closed - as of May 2, many of the Canada Border Services Small Vessel Reporting ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More