It was always a bit sad when we “put to bed” our power-boat at the end of the cruising season. Then, one year, our favourite mechanic suggested creating a service program at the end of this season, rather than the beginning of the next one. Price savings could be had, he explained. From then on we regarded the winterizing phase for our boat as a start of the next cruising season, not the end of the current one. What follows are some ideas to make this as easy as possible — and perhaps even less expensive.

altPutting your boat away with a clean engine room and bilge at the end of the season is extremely important.

A coating of oil, or a mixture of oil and fuel, will dry out over the winter and cake onto all of the bilge systems, fasteners and mechanical equipment that it touches. Then, over the winter, the storage wrap traps the oil fumes giving it months to permeate every part of your boat. It also makes the bilge a lot harder to clean out in the spring, but spring is a time when a clean bilge has particular value.

altWell it’s spring and time to organize most people’s least favourite spring outfitting job. Time to get the bottom painted. These days, when it comes to antifouling paints, we need to consider not just the cost to ourselves, but also the cost to the environment. With a little education, boaters can make both a green and a cost-effective decision for their antifouling paint.

First, a little history. From early days, copper in various forms, from copper sheathing to cuprous oxide in paint was the best available biocide for antifouling. Remember TBT (tributyltin).

altAhhh… The snows have melted (mostly) and spring is in the air. That means it’s time to think about commissioning and getting our boats ready for another summer on the water. Not surprisingly most of us have a bit of work to do on our boats so now is the perfect opportunity to look at cleaning up our act, so to speak.

With interest in all things environmental sweeping the globe, it’s worth thinking about how we can get our boats ready to go and do our part to keep our waters, and ourselves, healthy.
 

altWe’ve all seen it, or worse, had the experience ourselves; an older boat making a less than elegant landing due to sticky throttle cables, or stiff, balky steering. There are lots of older boats out there that get less use than they deserve due to old and uncooperative cables.

This is confirmed by the amount of discussion on various chat rooms concerning the problems associated with cables. Assuming your engine is in good working order, your steering and control cables are the next most important systems on your boat. Yet so often we see boats where these cables are poorly installed or corroded.

diy-maintenance-winterizing_main-smallJust this past winter, my own transmission cooler, which should have been mounted in a more upright position, froze and split the casing, causing water to steadily leak into my bilge until we discovered the problem and corrected it.

By "corrected" I mean dump money into replacing a perfectly good transmission cooler just because I thought it was fully drained when it wasn't.

diy-maintenance-tender-smallI'll never forget what a sad looking boat it was – a flaccid little inflatable with a wood floor, awash in perhaps 6 inches of slimy brown water that was slowly lapping into and out of the engine cover of the fairly new 9.9 Mercury outboard. The Merc' had been left on its side on the floor. The dinghy was half under the pier and half in the rain, tied loosely at the back of the big boat's slip, banging against the pilings 24 hours a day.

maintenance-checklist-smallThis Spring Launch Checklist is intended to be helpful for owners whose boats have been winterized and stored professionally. This Checklist is to help you launch the summer of 2010 with a boat that is in tip top shape and ready to deliver a season of trouble-free boating enjoyment.

If possible, before the dealer takes your boat out of storage, go and inspect it visually for any sign of fluid leaks, damage by water intrusion or wildlife or missing or damaged pieces.

maint-oil_change-smallThose beautiful new 4-stroke outboards behind you are a wonderful power plant. Smooth and quiet, powerful and quick, they've come a long way from the "old smokies" that thumped along a few decades back. However, as the 4-stroke outboards have evolved, their maintenance has become something many owners feel may be too complicated, or just plain difficult to attempt. Most owners simply drop off the boat at the yard for a haul-out or call "the guy" when the scheduled oil change is due.

Prop125When was the last time you sent your propeller shaft to the machine shop to be checked? How old are your engine mounts? Have you replaced your cutlass bearing recently? Do I sound like your mother? Well, if she were here, she’d be giving you some important advice! Powerboats and sailboats with inboard engines generally have rubber in the engine mounts, packing material in the stuffing box and a cutlass bearing in the propeller strut.

Related Articles

Boat Reviews

Video Gallery

 

 

Beneteau Oceanis Yacht 54By Zuzana Prochazka

Beneteau saw an opportunity to add a little thrill to any cruising adventure, so they took the hull of the First 53 racer (introduced just last year), and with a few fashionable changes, created the Oceanis Yacht 54, the new entry-level of Beneteau’s swanky Oceanis Yacht line. The result is a performance cruiser that sails like a witch and looks like a grande dame.

Design

Roberto Biscontini is the naval architect and Lorenzo Argento created the details of the exterior and interior design. 

Read More

Destinations

  • Prev
Over the course of four days in September 1864, representatives from Prince Edward Island, Nova ...
The new owners of L’Orignal Marina offer boaters a new destination. Located in a charming ...
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...
Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to ...
Located in Lake Huron, the internationally significant Manitoulin Island is the largest freshwater ...
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...

Riverest MarinaThe new owners of L’Orignal Marina offer boaters a new destination. Located in a charming francophone village in Eastern Ontario, this joined marina and restaurant venue is the ambitious initiative of long-time entrepreneur André Chabot and biologist Alexandra Quester, both residents of L’Orignal.

The purchase of the L’Orignal Marina was made official in November 2020. The new year was barely underway when all 50 available slips were already reserved. No wonder the addition of member and visitor slips is already planned for the 2022 season – the 2021 count is up to 62 power and sail already. At the moment, the Riverest Marina offers boaters a stop where they can launch their boat...

Read More

Lifestyle

  • Prev
Last issue we featured a story about the engagement proposal aboard Via-Mara, a 1969 Trojan 42 Aft ...
With thanks to Sail Canada, here’s a collection of photos that are Olympic quality. Clearly our ...
Wow. That was a lot of fun reading the collection of boat names that came in from all over the ...
No individual had a greater impact on the modern sport of sailing than Bruce Kirby. Known and ...
Just off The Ocean Race European Tour, Daniel is setting his sights on competing in The Ocean Race ...
After being our fearless leader and publisher since CYOB kicked off, Greg Nicoll, handed over the ...
Swim Drink Fish is spearheading the Vancouver Plastic Cleanup by installing, maintaining, and ...
With but four weeks to go, Sarah is in Japan, staying safe while acclimatizing to the heat at ...
MJM is a different kind of boat builder, second generation family owned and operated, we design and ...
Stuart Hendrie, a pro photographer sent along this photo of the pirate ship in Jordan Ontario. Many ...

Marine Products

  • Prev
Watermakers take ocean water and create perfect drinking water using reverse osmosis. A Schenker ...
If you’re headed out for a weekend afloat or on a week-long cruise you often must park your vehicle ...
Ten years ago, St. Margaret’s Bay (Halifax), Nova Scotia-based SailTimer Inc. made the first ...
Between the odor and working in confined spaces, replacing an onboard sanitation line is never a ...
For many boat owners who have gear to tote and the occasional stretch of bumpy road to negotiate, a ...
The 2022 Sea-Doo Switch is a re-imagined pontoon that makes hitting the water more accessible than ...
On the water audiophile-quality sound is attainable with the new JBL-R3500 source unit. The latest ...
An environmentally friendly product for refinishing your teak, hemp wood finishing oil is an ...
August means cruising, entertaining and enjoying summer at its finest. And that means food and ...
A Bluetooth-enabled phone or tablet is ideal for streaming music, but it's often stowed safely away ...

News

  • Prev
Royal Canadian Yacht Club’s Defiant completed a six-race sweep of the Cup for Canada over Zing, the ...
On September 6, Groupe Beneteau laid out its course to develop new boating experiences, new ...
Last Friday, the first ever Canada’s Celebration of Sailing honoured the season for Sailing in ...
Boating Ontario is very proud to have Transport Canada’s Office of Boating Safety jump on ...
Montreal-based Vision Marine Technologies, Inc. is headed to the Lake of the Ozarks Shootout to ...
Summer is in full swing with Canadians enjoying time outside and on the water. So, while enjoying ...
On July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor ...
HanseYachts AG presents RYCK, its third motorboat brand carrying the "Made in Germany" label. The ...
“We are all proud of our athletes and coaches who have dedicated themselves to push Canadian ...
Collingwood, ON hq’d Limestone Boat Company – owner and builder of Aquasport Boats, Limestone Boats ...

Mia and Caleb's EngagementOn July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor Yacht in Oromocto NB. (That piece was also expanded in CY magazine later in the year.)

One of our Canadian Yachting contributors, Denise Miller, had shared the article on my social media and a young man reached out and asked if she could connect him with the owners of the boat, Dave and Barb. Denise leapt into action and Dave and Barb were thrilled. They concocted a plan that the young lady, Mia, thought she was coming to model for a sales brochure for Dave to do charter tours.

Read More