Sept 22, 2022

As Thanksgiving heads our way, it tends to be the ‘last hurrah’ on many fronts:  the last long weekend before snowflakes, and (for many of us) the last time to enjoy the family boat for the season before other work/school/tasks/life take precedence.

Some marinas began hauling boats right after Labour Day and that continues for almost two months in many spots. This signals the ‘pre-haul-out’ work to begin.

There are several tasks that should be done prior to the boat being lifted out of the water that are advantageous to be done while the boat is still in – do them yourself or line up a pro. Here are a few ways to stay ahead of the game when considering winterizing tasks:


Time for an Oil ChangeGreat time for an oil change

1) An oil change. Always best done in the water. Why? The engine can be run, allowing the engine (and therefore the engine oil) to warm up to temperature. This makes the extraction process that much easier: The oil will be warm, thinner, and therefore you’ll be less prone to leaving excessive amounts of older oil behind. Most engine manufacturers recommend that the engine oil is changed every 100 hours, or once annually (whichever comes first). Fall is a great time to change the oil, allowing the fresh oil to be present in the spring (making spring start-ups that much easier).

 

Adding Stabilizer(Right) adding stabilizer to the fuel tank

 

2) Topping up your fuel tank and stabilizing the fuel. Fuel tanks should be stored full for the winter: If empty air space is left in the fuel tank, changes in day/night temperatures during the storage season can create condensation. Condensation will then drip into the remaining fuel, watering it down. In cases where ethanol is present in the fuel, the water molecules will join with the ethanol and separate from the gasoline, taking with it some of the octane present in the gas. This separation causes fuel to go ‘bad’ – and there may not be enough octane left in the fuel to start the engine in the spring. Fill your tank and add a stabilizer. In any remaining time aboard between now and haul out, the stabilizer will make it’s way from the tank, through the fuel lines and filters to the engine, thereby stabilizing the entire system.

In the case of a diesel engine, a biocide is added to the fuel to prevent microbial growth during the storage period. 

3) Drain/change water-separating fuel filters. This removes any sediment or particles that have been caught in the fuel filter, and removes any water that may have been separated by the filter, before reaching the engine. If left to freeze over the winter, the filter/cannister/bowl could crack…and even in the best case scenario could make the engine tough to start in the spring.

4) Check engine fluids: check power steering fluid, coolants, hydraulic fluid and transmission fluid. Top up where needed, and replace fluids as necessary. By taking this on now, it allows you to check for leaks and proper circulation with the engine running

5) Add a holding tank cleaner to the head. Allow the cleaner to ‘slosh around’ in the holding tank for a while before pumping out that last time before haul out.
6) Pump out your boat’s holding tank: You’re in for a treat in the spring if you forget that last pump out.

7) Empty the fridge: Take food and drinks off the boat – this prevents freezing damage, and critters from being tempted to take shelter aboard during the storage season.

8) Drain the fresh water and hot water tanks

9) Top up the batteries: Make sure that they are fully charged before the boat is stored – and this is often easiest done via shore power, or by running the engine or generator while in the water.

Gelcoat Cracksgelcoat cracks should be covered or sealed before storing for winter.

10) Patch up leaks, cracks, and damage. Even if it’s a temporary fix, it’s always a good idea to cover any damaged areas or fill any cracks or voids with a sealant to prevent water entering the damage and freezing (which will potentially expand and damage the area further).

11) Take her out for one last trip. And make it a great one.

 

Andrew McDonald is the owner of Lakeside Marine Services – a boat repair/maintenance firm based in Toronto. Andrew has worked in the marine industry for 12 years and is a graduate of the Georgian College ‘Mechanical Techniques - Marine Engine Mechanic’ program.

Questions or comments for Andrew? Email him directly via: This email address is being protected from spambots. You need JavaScript enabled to view it.

Related Articles

Wednesday, 09 August 2017 02:52

The moment we all dread. It’s a warm sunny day and you’re out for a cruise. Suddenly the boat shudders beneath you, pings, dings and clangs are heard and you realize that you’ve hit something...

Wednesday, 11 October 2017 05:00

If you walk the aisles at a boat show, visit a marine store, or stop in at a repair shop, you’ll likely be inundated with digital displays, vivid touch-screens, NMEA compatible devices, and...

Wednesday, 08 November 2017 04:38

Water has a funny way of making its way into a boat: through through-hulls, stuffing boxes, leaks, hatches, windows and portholes 

Tuesday, 12 September 2017 06:10

The moment we all dread. It’s a warm sunny day and you’re out for a cruise. Suddenly the boat shudders beneath you, pings, dings and clangs are heard and you realize that you’ve hit something...

Wednesday, 10 May 2017 00:43

Question: Can I buy generic automotive parts or products for my boat, or should they specify ‘marine’?

Tuesday, 11 July 2017 07:16

For most of us – this is the time to make the most of the boating season – launch and set up are done. Systems have been recommissioned. Let the fun begin!

Boat Reviews

  • Prev
The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and ...
Boats have been in high demand for the past two years and there’s no sign of this easing. ...
When we arranged to interview the designer and manufacturer to write a profile of the X Shore Eelex ...
I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats ...
The weather wasn’t cooperating for our test of the new Fountaine Pajot Isla 40. Rain, storm clouds ...
Last August, we were again invited to the Neptunus Yachts facility in St. Catharines, Ontario to ...
Cruisers Yachts’ 34 GLS is the latest model in the Cruisers Yachts line that includes a dozen ...
On a beautiful summer morning in July, I hopped aboard a new-owner delivery from the Outer Harbour ...
When company founder Marcio Schaefer designed the Schaefer 303, he managed to really dial in the ...
There is an unmistakable look to the Azimut S6 Coupe that will stand out in almost any marina. The ...

Video Gallery

 

 

Viko S35

By Katherine Stone

I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats on champagne fall days when many boats are either being hauled for the winter, or are already under shrink-wrap.

Not only are there great winds – usually offshore, but welcome sunshine and open waters with few boats out enjoying the last days of September. Joining me for the test sail of the Viko S35 was the former publisher of Canadian Yachting, Greg Nicoll, and the Canadian Viko Yachts representative, Eric Beauregard, who had driven down from Montreal.

Read More

 

 

Four Winns H4

 

Four Winns H4By Andy Adams

The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and the new H4 is a great example of how the design and engineering resources of Beneteau can up the game even for a brand like Four Winns that has a long and distinguished history.

The Cadillac Michigan-built H4 is a brand-new design this year and we think it's especially handsome. The vertical stem bow is all new and innovative. It is a design feature that was chosen to give Four Winns and the H4 a sense of modern and contemporary look while the stern remains more traditional. 

Read More

Destinations

  • Prev
It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul ...
Cowichan Bay is a waterfront village with a row of shops, artisan products, marine supplies and a ...
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

West Side Story

by Jennifer M. Smith, drone photos by Alex Nikolajevich

It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul out was still over a month away. The question was: where to now? Friends in Meaford often suggested we sail in for a visit. We never had because we’d always moved north-south on the east side of Georgian Bay. This year we were up for something different. This was the perfect opportunity to cruise the west side of the bay.

We made the 10 a.m. bridge out of Little Current and motor-sailed east southeast in light northerlies. We’d often sailed past Snug Harbour, a nearly land-locked anchorage on the north side of Lansdowne Channel because the chart suggested we’d never make it in there with our six-foot draft. 

Read More

Lifestyle

  • Prev
This week’s Photo of the Week comes from BC. The 99th Grey Creek Regatta was held at the Lakeview ...
Back in 2019 (I believe) your magazine used a pic of Sweet Love, a Ranger Tug 31, in a photo ...
a few shots of my wife Maggie practicing her silks routine on our 1982 C&C in the North Channel ...
Last issue, we took a look at boat names. Little did we know we would get what probably will be the ...
Boat names and puns go together like …. Well, like nothing else. Here’s a couple shared by our pal ...
Frequent Windsor racing contributor to Sailing in Canada Roger Renaud, caught this gorgeous ...
The Kingston Yacht Club (KYC) celebrated its 125th anniversary in the summer of 2021, in all the ...
A study on water levels projects an unprecedented drop of water levels on Lakes Michigan-Huron and ...
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
You’ve invested thousands and thousands of dollars into your boat so naturally, you want to find ...

Marine Products

  • Prev
What happened. Where did our summer go? Well, never mind that, it’s time to start thinking about ...
Cruising boaters visiting new destinations can face challenges when the marina's shorepower system ...
Worn plastic hatch covers can detract from a boat's appearance and its functionality, especially ...
The first builder of electric boats, founded in 1893, Elco now introduces new designs of its EP-6, ...
More than 3/4 of all recreational boats (power and sail) are under 26 feet and towable.
One of the top requests in the electrification of water transport is for a jet ski that can deliver ...
Many boat toilets have dimensions similar to a five-gallon bucket—and are nearly as uncomfortable. ...
Working alongside a US-based designer and boat building company, Burlington ON-based MarsKeel ...
It’s still vacation time and that means calories don’t count. The Boat Galley Cookbook: 800 ...
Words of exasperation wafting across a marina often signal a boat owner fighting with a jammed ...

News

  • Prev
Parks Canada advises that the Kirkfield Lift Lock will begin single-chamber lockages for through ...
The Four Winns TH36 Catamaran had its world premiere at the Cannes Yachting Festival, September ...
After borrowing boats for a couple of years, longtime J105 fanatic and many-year organizer of the ...
Due to ongoing mechanical issues, the Kirkfield Lift Lock will remain closed for the foreseeable ...
BCI Marine is announcing that it will become Canada's distributor of OXE Marine's ...
US Team Zing’s increased boat speed and improved crew work were no match for the extraordinary crew ...
Vision Marine, founded in Montreal and currently based in Boisbriand QC, in partnership with ...
On Sunday, August 21, the Royal Canadian Yacht Club (RCYC) held its fourth annual ...
While there’s still some good weather left, let’s take a moment to celebrate this summer. Sunny, ...
Light air conditions prevented racing on Saturday, which meant there were three fleet races on ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More