Jan 27, 2022

WiringIn Part 1, last issue, you reviewed the fundamentals. Now that you understand some of the basic constructs of electrical work we look at getting down to the exercise of determining what wire too use and how do I connect it? This article will concentrate on the DC side of your vessel. If there is sufficient interest I can look at writing an article on AC wiring and/or shore power.

Wire Types

If you have done any wiring in your house you are probably used to the white jacketed wire containing two or three insulated conductors and an uninsulated ground wire. You will notice that under the insulation the wires are a shiny copper colour and that each wire is one solid conductor. For use at 120/240VAC, your cable will be typically #14, rated at 15A, #12 rated at 20A, or #10 rated at 30A. What do these size measurements mean?

In North America we typically use the American Wire Gauge (AWG) where the numbers run from #30 (very small) to #0000 (very large) for the normal situations you may find yourself in. The wire gets fatter and can carry more current as the wire number goes down. That’s not confusing is it?

You may also hear of the Society of Automotive Engineers (SAE) wire sizing scheme. For the same wire size (eg #14) AWG wire has 10% more copper then the SAE wire. Due to the smaller amount of copper in the wire, SAE designated wire is acceptable in DC circuits but not AC ones.

In Europe (ISO) they have a more sensible system where wire is specified by the cross sectional area (mm2). As the wire gets fatter the mm2 value increases and the wire can carry more current. There are cross reference tables online to allow you to work back and forth. Thus a European cable rated at 2.5mm2 is equivalent to #14AWG and a cable rated at 70mm2 is equivalent to #2/0AWG.

The wire is a shiny copper colour as it is uncoated and un-corroded. When copper is exposed to the air (especially salt air or water) it will start to turn green as it oxidizes. Fun Fact: think of a copper roofed building whereby it starts out a bright shiny copper and how it darkens and turns green as it weathers.

Have you ever tried to break a piece of copper wire by flexing it quickly back and forth? This work hardens the copper and it will soon snap. For use on a boat, which is subject to all sorts of vibration, this would not be a good thing so boat wire is finely stranded to make it much less sensitive to flexing. (Even so you should still support you wiring every 18” or so.)

To further increase boat wires environmental hardiness, it is also tin plated as the tin improves the wires ability to withstand corrosion. When you strip boat cable you will find it’s a silver colour due to this tin plating.

Wire Ampacity

American Standard Wire Gauge AWGThe ability of a wire to carry current is constrained by how much the wire heats up. Any wire has an inherent resistance, as mentioned above, dependent on material, cross section and length. As a current flows through this wire resistance it creates heat at a rate of I squared x R. For example if we have 8” of #1/0 battery cable, that has a resistance of about .097 mohm (resistivity of copper x length/cross sectional area or 1.7x10-8 x .2m/35x10-6). At a current of 100A, we multiply 100 x 100 and divide by .000097 to get a heat loss of 0.97W. That’s pretty negligible in this case. However if we had used a #12 wire what would happen? Now we would be dissipating 8.5W in our 8” wire and it would get very hot. At some point our insulation would melt.

Wire insulation is rated in degrees C. Typically 60, 75, 90 and 105. A wire with a higher temperature rating can carry more current than a wire with a lower temperature rating. When possible go with 105C rated wire. This temperature rating will be marked on the cable if it is ABYC compliant. If your boat came from a European manufacturer you may find it was built with 60C wiring. The temperature rating also drops if your wire is installed in a wet environment. Eg from 105rC to 75C.

This temperature rating is also affected by ambient temperature (the hotter the wire is to start the less current it can handle), if it is bundled with other current carrying wires or in a shared conduit (again reduces the maximum current the wire can handle as the bundle can’t dissipate the heat as well as a single wire can), and is it in a engine space ( engine spaces are assumed to be at 50C in ABYC standards and this preheating of the cable reduces the ampacity of the wire and accounts for the “inside” and “Outside” columns in a wire sizing table), and how long the load will run for (the longer the run the hotter the cable could get).

If our cable is run at currents that heat the cable substantially, some of this heat will be transferred through to the connected device. Many of these devices are rated at 90C or lower and heat from the cable may cause them to exceed their temperature limit. To mitigate this you may choose to use the 90C or lower columns in the table. This will result in fatter but cooler cables and devices.

The good news is that when we talk about voltage drop in the next installment and look at how to select the required wire size there are tables and programs that take all these factors into account to give you the correct size for your application.

Figure 4

An example of one of these tables taken from ABYC E-11 specification is shown in figure 4. This table is for DC and AC circuits where single conductors, not bundled or placed in conduit are used. If you bundle or run the wiring in a conduit you must use the relevant table.

 

Next time: Voltage Drop and wire sizing

Mike WheatstoneCYOB’s Boat Nerd, Mike Wheatstone, has enjoyed sailing since he was in his mid teens. A Queen’s electrical engineer by training, he spent his career working for Ontario Hydro and Hydro One. There he worked in engineering supporting the power system control centres.

His first boat in 1980 was a Shark. With a growing family’s 2-foot-itis, there were upgrades to a Grampian 26, CS34 and currently a Hunter36. Now retired, Mike and his family spend summers on the Hunter (Dragonfyre) and winters in the Caribbean on their Leopard 43 cat (Peregrine).

Related Articles

Tuesday, 09 November 2021 21:00

Hi Mike, My name is Sergey (59 y.o.) and I'm cruising on Georgian Bay on Jeanneau SO379 for 7 years (late starter), considering owning a cat on the Caribbean somewhere upon retiring (~5 yrs.)

Tuesday, 09 March 2021 14:46

How do you know what’s happening with your boat when you’re not on board? This is especially trying in the Covid world we find ourselves in when many of us may not be able to get back to our boats!

Tuesday, 09 November 2021 20:46

Last issue, The Boat Nerd, Mike Wheatstone, introduced us to lithium batteries and explained why they are important. <link to Part 1>. This time, we dig deeper into the technology inside them.

Monday, 16 November 2020 20:08

There's nothing that we like to do more than talk "nerd", especially when it comes to boats! Your new feature "The Boat Nerd - the boater's guide to the newfangled" sounds like an outstanding...

Tuesday, 26 January 2021 23:37

For anyone cruising on a boat that will be away from the dock for any appreciable time keeping the batteries charged becomes an important consideration. The silent and on-going cost-free nature of...

Tuesday, 11 January 2022 11:05

Here at CYOB we are skipping Omicron; we’re talking about Wiring.

Boat Reviews

Video Gallery

 

 

Oakley 245 CCBy Andy Adams

The multi-generational island cottagers of Georgian Bay and serious fishermen are just two of the groups most attracted to the new Oakley Boats models.

Brad Oakley has been around the boat business his entire life and he said to me that he has long admired durable, seaworthy welded aluminum boats. His company WMW Vacuum Pumpout Systems in Waubaushene, Ontario on Georgian Bay, builds highly regarded vacuum pump-out systems and Oakley’s equipment is in so many marinas that he knows a lot of people in the business.

Read More

 

 

 

Fountaine Pajot Astrea 42By Katherine Stone

On a beautiful summer morning in July, I hopped aboard a new-owner delivery from the Outer Harbour Marina in Toronto to the Port Credit Harbour Marina in Mississauga, with the President of Navy Point Yacht Sales, Steve McPherson. I don’t know if I have ever referred to a boat as pretty, but this adjective fits the Fountaine Pajot Astrea 42 to a tee.

The transitions and communication from interior to exterior spaces are seamless and well-thought-out with functional ergonomics. 

Read More

Destinations

  • Prev
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...
We bobbed in the brisk winds while rounding the breakwater into Victoria Harbour, then lowered sail ...
Over the course of four days in September 1864, representatives from Prince Edward Island, Nova ...
The new owners of L’Orignal Marina offer boaters a new destination. Located in a charming ...
Commemorating 100 (+1) years of through-navigation on the Trent-Severn Waterway National Historic ...
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...

The Ottawa Flight LocksFollowing the War of 1812, a battle that Canada narrowly won against the United States, the boundaries of Upper Canada were held and the British army realized that the St. Lawrence River was no longer safe as a supply route. A more defensible route was needed to bring supplies from Montreal to Kingston and on into other Great Lakes settlements.

This new, more secure route revealed itself through the travel and trade of the Indigenous peoples. Surveyors learned that one of the Indigenous trade routes began at the mouth of the Cataraqui River in Kingston (Canada’s first national capital) and connected a series of lakes and rivers all the way through to where the Rideau River meets the Ottawa River in the heart of Bytown (known today as Canada’s national capital: the City of Ottawa). 

Read More

Lifestyle

  • Prev
There are two POTWs this time. The reason? Guilt. We are picking up the first one from the internet ...
So, I’m at Mobility Cup in Nepean, across the river from Ottawa. I’ve participated in Mobility Cup ...
Emirates Team New Zealand, who introduced foiling to America’s Cup competition in 2012, is ...
Our own Ask Andrew ‘floated his Fanny down the Ganny’ in the annual boat race held on Ganaraska ...
While there’s all kinds of discussion, particularly in NZ, about the plan to defend the 37th ...
How a young woman who was encouraged by her father to enter a contest, became a member of the ...
We got this beauty from Don Snell of the Sea Spray Class in Alberta who proudly reminds us “the ...
This past June I stepped aside as Publisher of Canadian Yachting Media after a ten-year run. It was ...
This February, Sarah Douglas, Canadian Olympic Team member in the Laser Radial class, won the Laser ...
We have had Christmas tree photos in years past, but this topper says it all. Like the traditional ...

Marine Products

  • Prev
The club's first digital guide is the collaborative effort of dozens of CCA members and now ...
The days are lovely and what better way to celebrate than heading to the engine compartment. Here ...
While collapsible bimini tops offer boaters a welcome escape from direct sun, deployment and ...
Volvo Penta is launching its Assisted Docking system as a retrofit upgrade for many yacht owners ...
Don’t let offshore emergencies turn into disasters. SeaKits help to prepare you for emergencies at ...
It’s one of the best things about sailors: we hate to give up on our equipment. But if you’re like ...
Furuno has announced that Navionics cartography is now available on their GP1871F and GP1971F ...
With the boat back in the water it’s time to refresh our boating skills after a long lay-off. ...
I’ve been doing powerboat reviews for Canadian Yachting magazine for over 40 years now and I want ...
Many boaters prefer the clean appearance and greater safety of modern pull-up cleats that retract ...

News

  • Prev
According to their Facebook page, TSN is on onboard as The Canadian SailGP’s entry’s broadcast ...
According to International Boating Industry magazine, the BRIG factory near Kharkiv, Ukraine ...
After a two-year hiatus the 53rd edition of Antigua Sailing Week wrapped up on Sunday, brimming ...
When SailGP Season 3 commences on May 14 in Bermuda, it will mark an historic moment for Canadian ...
Georgian Bay boaters are familiar with the prehistoric landscape of the Bruce peninsula and are ...
Canada SailGP Team has unveiled a three-year partnership with the Algorand Foundation. The ...
Note: this information applies to Lake Ontario but indicates what is expected by US authorities ...
At the 2022 Palm International Beach Boat Show, BoatTEST founder Jeff Hammond met with Boyd ...
Winds, waves, fog, lightning, hail, tornadoes .... hurricanes! The wise boater respects and ...
The Maritime Radio course teaches emergency radio procedures and everyday operating techniques. ...

Fuel EconomyI filled up last week at $1.90. Pundits are suggesting that prices will stay high throughout the summer. Radio and TV news have been flooded with ‘man on the street’ interviews that show the impact on the average driver. How will these prices affect the average boater this year? Will we see more hours spent on the docks and fewer on the water? Will fuel efficiency become a top-of –mind selling point? Will we see a shift toward electric marine engines?

Time will tell – but for the majority of us, we’ll need to weather the storm as best we can. There are a number of tips and tricks we can employ aboard to make the most of our boat’s fuel. BoatUS published an excellent article this week that I’ll break down...

Read More