Viking28250B1By Paul Howard

 "We wanted a good-looking, smart-sailing boat with berths for four," said George Cuthbertson, the leader of the C&C team that designed the Viking 28. "But, we made a conscious decision not to distort the lines of this racer/cruiser in order to create headroom." Considering the fact that Cuthbertson is 6 ft 4in., a 28-footer with headroom enough for his frame would have been very top-heavy. 

The Viking was the first of the C&C-designed Viking series built by Ontario Yachts in Oakville, Ontario. Later, this shop added the Viking 22, 33 and a modified 33 renamed as the Viking 34. Interestingly, in the early '70s the Viking 28 made its way overseas when it was built by Anesty Yachts in England and renamed the Trapper 28. Seventy of these Euro-Vikings were built along with a number of other C&C designs including the C&C 27, called the Trapper 27, and the C&C 35.

About 147 Viking 28s were built by Ontario Yachts between 1968 and 1983. Although initially offered in kit form, many subsequent Vikings were professionally finished. A number of modifications to the design were made in 1974, and included the addition of a pop-top hatch and a wider companionway. At the same time, the mast step area and vee-berth were altered to strengthen the hull. The Viking 28 was available with either an outboard engine in a well in the lazarette, or with a 7 hp Vire two-cycle gasolene inboard. 

At 28 ft 2 in. LOA and 4,755 lbs, the Viking was considerably lighter for its size than most designs at that time. Cuthbertson comments that, "at 47 per cent ballast (with 2,250 lbs. of cast iron in a 4 ft 6 in. fin keel), she was heavily ballasted for her day." 

In the 1970s the Viking 28 was popular as both a one design and as a performance cruiser. Several Lake Ontario clubs established fleets of these boats, with the Royal Hamilton Yacht Club having had the largest and best known congregation. A half-hull model still hangs over the bar at the clubhouse where early fleets are honoured. Indeed, the Viking 28 played an important role in the racing programme at the RHYC, as the boat was affordable, easy to handle with a mixed crew, yet also offered good racing performance and a moderate cruising interior. Thee RHYC members boosted the early fleet by purchasing boats at the same time and naming them after their favourite liquours. Crown Royal has a purple hull, Irish Mist a green hull and MaiTai is yellow and blue. 

I sailed a weekday evening race with Peter Kozak, a member of the Toronto Sailing and Canoe Club and owner of Victory Hunter -- one of the last Vikings built. Victory Hunter's hull profile immediately identified it as a classic C&C design with a high bow, easy sheer, a moderate overhang aft and a reverse sheer transom. The topsides are low compared to most C&C designs and the boat looks classy, with great eye appeal. 

A narrow but long cockpit is split by the main traveller, with the mainsail trimmer located aft of the helmperson. The tiller, which leads to a swept spade rudder, is forward, with the helmsperson located near the winches and although narrow, the cockpit is workable. 

With a pick-up crew of four struggling to get the lines led correctly, we headed out for the race course. There were four of the TS&CC's five Vikings on the course that night, but our nemesis was Roy Kobayashi on Dhyana IV -- a long-time Viking master. 

The wind was light to moderate, with 12 knots blowing through an overcast evening early in the sailing season. The finish was very close -- in fact too close to call -- but the Race Committee later informed us that we edged Dhyana IV by inches. It was a fun club race, just as it should be, and demonstrated to me that the inboard Viking 28 sails up to its base PHRF rating of 177. I took the helm for part of the race and found she tacked quickly and accelerated to speed easily. Steering was light and responsive, although I had to be alert on the tiller as there is little directional stability aside from steering control. This is a stiff boat and felt firm underfoot -- a nice club racing platform. The hardware was adequate for the boat, albeit relatively light, but no heavy work is involved in a boat with only a 32.5-foot rig. Being a narrow boat with a high ballast ratio, this boat carries sail well and smartly slices cleanly through waves in heavy weather. 

Earlier models had problems with the deck-stepped mast support, as the original construction was with an oak beam spanning the supports. Thus, many owners have retro-fitted aluminum plates to reinforce the area directly beneath the mast step. Also, with a balsa-core deck, owners must ensure that deck fittings are well-bedded with sealant and backing plates; otherwise, water will seep in and create a spongy deck. 

A dozen or so 28s participate in the annual C&C Owner's Regatta at the National Yacht Club in Toronto. They also have a one design Lake Ontario Championship regatta held annually at the Frenchmen's Bay Yacht Club, Pickering, Ont. Oakville Yacht Squadron member John Webb owned hull number 138, Peregrine from new in 1979 until this year. He won a forestay of flags during the '80s when 15- to 20-boats turned out for one design regattas. Webb also cruised aboard during summer holidays to the Thousand Islands with his family of four. Says Webb, "She's a great entry- level boat that provides good club racing for a small investment and is well-suited to cruising -- if you don't mind sitting headroom." 

Originally published in Canadian Yachting's Fall 1995 issue

Specifications

LOA                  28 ft. 2 in.

Beam                   8 ft. 5 in.

Draft                    4 ft. 6 in.

Displacement       4,755 lbs.

 

Related Articles

 

 

Beneteau Oceanis Yacht 54By Zuzana Prochazka

Beneteau saw an opportunity to add a little thrill to any cruising adventure, so they took the hull of the First 53 racer (introduced just last year), and with a few fashionable changes, created the Oceanis Yacht 54, the new entry-level of Beneteau’s swanky Oceanis Yacht line. The result is a performance cruiser that sails like a witch and looks like a grande dame.

Design

Roberto Biscontini is the naval architect and Lorenzo Argento created the details of the exterior and interior design. 

Read More

Destinations

  • Prev
Over the course of four days in September 1864, representatives from Prince Edward Island, Nova ...
The new owners of L’Orignal Marina offer boaters a new destination. Located in a charming ...
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...
Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to ...
Located in Lake Huron, the internationally significant Manitoulin Island is the largest freshwater ...
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...

Riverest MarinaThe new owners of L’Orignal Marina offer boaters a new destination. Located in a charming francophone village in Eastern Ontario, this joined marina and restaurant venue is the ambitious initiative of long-time entrepreneur André Chabot and biologist Alexandra Quester, both residents of L’Orignal.

The purchase of the L’Orignal Marina was made official in November 2020. The new year was barely underway when all 50 available slips were already reserved. No wonder the addition of member and visitor slips is already planned for the 2022 season – the 2021 count is up to 62 power and sail already. At the moment, the Riverest Marina offers boaters a stop where they can launch their boat...

Read More

Lifestyle

  • Prev
Last issue we featured a story about the engagement proposal aboard Via-Mara, a 1969 Trojan 42 Aft ...
With thanks to Sail Canada, here’s a collection of photos that are Olympic quality. Clearly our ...
Wow. That was a lot of fun reading the collection of boat names that came in from all over the ...
No individual had a greater impact on the modern sport of sailing than Bruce Kirby. Known and ...
Just off The Ocean Race European Tour, Daniel is setting his sights on competing in The Ocean Race ...
After being our fearless leader and publisher since CYOB kicked off, Greg Nicoll, handed over the ...
Swim Drink Fish is spearheading the Vancouver Plastic Cleanup by installing, maintaining, and ...
With but four weeks to go, Sarah is in Japan, staying safe while acclimatizing to the heat at ...
MJM is a different kind of boat builder, second generation family owned and operated, we design and ...
Stuart Hendrie, a pro photographer sent along this photo of the pirate ship in Jordan Ontario. Many ...

DIY & How to

  • Prev
It’s a scary thought - whether your boat is made of wood, fiberglass, aluminum or composite – it’s ...
It’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – ...
Last summer there was tremendous interest in buying a boat to have fun in the restricted world ...
The boat buying or selling market is hot now and has been since the late spring of 2020. Sean ...
Last issue we got up with Montreal sailor Marc Robic who has accumulated a lot of tips and tricks ...
While some parts of the country are lucky enough to have year-round boating, there are plenty of ...
A Transducer is a device that is installed below the waterline that provides underwater data to a ...
Spring has finally sprung! At least it has weather wise here in Montreal, so it is with great ...
For most of us, the thrill of being aboard is associated with the motion of the water, wind in our ...
An important, but often overlooked maintenance item on any type of boat is it’s steering system. ...

Galvanic CorrosionIt’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – it’s slowly deteriorating under you. Part of this is the nature of the marine environment: Sun, moisture, waves, wind, movement and vibration all contribute to components breaking down.

But there are other factors that are much more concerning and act at a significantly faster rate that the environment can take credit for. One of these is commonly spoken of, but not terribly well understood: Corrosion. As boaters, we’re concerned with two main types of corrosion: Galvanic and Stray-Current. This edition will focus on galvanic corrosion – in two weeks, stay tuned for info on stray-current.

Read More

 

  

Marine Products

  • Prev
Watermakers take ocean water and create perfect drinking water using reverse osmosis. A Schenker ...
If you’re headed out for a weekend afloat or on a week-long cruise you often must park your vehicle ...
Ten years ago, St. Margaret’s Bay (Halifax), Nova Scotia-based SailTimer Inc. made the first ...
Between the odor and working in confined spaces, replacing an onboard sanitation line is never a ...
For many boat owners who have gear to tote and the occasional stretch of bumpy road to negotiate, a ...
The 2022 Sea-Doo Switch is a re-imagined pontoon that makes hitting the water more accessible than ...
On the water audiophile-quality sound is attainable with the new JBL-R3500 source unit. The latest ...
An environmentally friendly product for refinishing your teak, hemp wood finishing oil is an ...
August means cruising, entertaining and enjoying summer at its finest. And that means food and ...
A Bluetooth-enabled phone or tablet is ideal for streaming music, but it's often stowed safely away ...

News

  • Prev
Royal Canadian Yacht Club’s Defiant completed a six-race sweep of the Cup for Canada over Zing, the ...
On September 6, Groupe Beneteau laid out its course to develop new boating experiences, new ...
Last Friday, the first ever Canada’s Celebration of Sailing honoured the season for Sailing in ...
Boating Ontario is very proud to have Transport Canada’s Office of Boating Safety jump on ...
Montreal-based Vision Marine Technologies, Inc. is headed to the Lake of the Ozarks Shootout to ...
Summer is in full swing with Canadians enjoying time outside and on the water. So, while enjoying ...
On July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor ...
HanseYachts AG presents RYCK, its third motorboat brand carrying the "Made in Germany" label. The ...
“We are all proud of our athletes and coaches who have dedicated themselves to push Canadian ...
Collingwood, ON hq’d Limestone Boat Company – owner and builder of Aquasport Boats, Limestone Boats ...

Mia and Caleb's EngagementOn July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor Yacht in Oromocto NB. (That piece was also expanded in CY magazine later in the year.)

One of our Canadian Yachting contributors, Denise Miller, had shared the article on my social media and a young man reached out and asked if she could connect him with the owners of the boat, Dave and Barb. Denise leapt into action and Dave and Barb were thrilled. They concocted a plan that the young lady, Mia, thought she was coming to model for a sales brochure for Dave to do charter tours.

Read More