Electra_Sport_20250Nov2By Graham Jones

What do you get when you cross an Ideal 18 with a 505...? After two action-packed test-drives on Lake Ontario last summer, my answer is speed, excitement, convenience - and the new Electra Sport 20. Hot of the drawing board of the design team of sailmakers Hubert Raudaschl of St. Wolfgang, Austria, and Heider Funck of Toronto, this sleek sport-boat made its Canadian debut as it screamed around the race course in Toronto's Humber Bay this past summer. Four years ago, Funck began to dream about building a small performance-oriented, One-Design keelboat that would be fast, easy-to-handle and also simple to pack up at the end of a day's racing.

What Funck is now marketing in Canada and Europe is something akin to an Ideal 18 on steroids. In his words, "we are hoping that the Electra will be appealing to so-called Masters sailors who have graduated from the Laser class and are looking for a new boat to race One Design." In its first incarnation, the Electra was conceived as a one-person One Design with a 100 per cent, self-tacking jib on a small furler and a mega-roach, fully battened main. With a tight set of class rules that will force owners to race their boats out of the builder's box, Funck envisions his boat sailing in a pure One-Design setting in both single-handed and double-handed classes.

Ironically, the first Electra sold in Canada (three are currently sailing in Austria) is being used for cruising (not racing) on Lake Muskoka in Ontario's cottage country. And in reality the Electra will be a fantastic cottage boat on larger lakes like Muskoka because it excels in the lighter airs and flat water that typify inland sailing. While Funck originally intended the Electra to sail with a maxi-roach main and self-tacker, this sail plan has been modified since launch time to fine-tune the boat's overall performance. With its original sail plan (the powerful main and small jib combo more often seen on performance catamarans like the Tornado), the ES lacked the forward punch to power the Electra upwind in a chop. As it was, the small-battened jib could not re-accelerate the boat if the bow hit a wave the wrong way. To give the boat more horse-power, Funck has more recently added a larger overlapping 130 per cent Mylar jib.

I tested the Electra with both headsail combinations on separate occasions, first in mid-summer and then later in the autumn and found that the combination of the bigger lapper, as it is called, and less-radical roach profile on the main is the most balanced, all-purpose setup. After he returned to the loft floor to cut-down the roach of the main and design the new lapper. Funck began experimenting with a spinnaker for the Electra Sport. With new-found boats peed upwind, the Electra's downwind legs still needed turbo-charging. While white-sailing in club races, Funck found he could sail significantly faster off-wind than a Shark skipered by one of the world's purportedly craftiest Shark sailors, Sid Dakin. Still not satisfied with this showing, Funck rigged a pole and spin-gear and went out sail-testing with a slightly modified Shark spinnaker he had built at his loft. While I did not have an opportunity to sail with the chute, I did get a chance to watch a video of the Sport in flying sails mode. Some of the thrilling footage taken from a chase boat showed the Electra tearing along in perfect control on a screaming three-sail reach in around 15 knots of breeze (in the strong puffs, the tender was definitely the chase-boat).

Even in these moderate conditions the Electra appeared on the edge of sailing through is blow wave and as Funck pumped the mainsheet, he seemed prepared to catch a plane to double-digit boat speeds! The broad smiles on the faces of the skipper and crew as they later surfed on the rooster-tail of the photo-boat, suggested that the Electra was breaking sailing's equivalent of the sound barrier that cold October weekend. From, the view on the power boat, it wasn't hard to notice the impressive wall of sail flying from the Electra's single swept-spreader rig (an Isomat section one smaller than that used on the Ideal 18).

In spite of its large sail plan, the Electra Sport is surprisingly stiff. With this big multihull-style rig, the boat will scoot along in the predominantly light air of inland sailing in and around the Great Lakes. In heavy air, two crew with legs in hiking straps and bums over the side in half-hike positions will be able to keep the Electra under control without fear of the dreaded wipeout. The 300 lbs of lead in the boat's elliptical keel also make the job of keeping the Electra flat a lot easier on the back. With new wheels off of the wind, Funck decided to enter into more local PHRF flying sail club races in the Toronto area. Shortly after, a local boat measurer convinced Funck to measure the Electra for MORC so the boat could race on weekends in Toronto's growing interclub MORC fleet. For the rating conscious, the boat's initial PHRF number is around 230 seconds-a-mile and just above 20 feet in MORC, with a spinnaker and a 130 per cent genoa.

The first time I saw the Electra sailing around the cans last summer was during a breezy (30-knot-plus) interclub point-to-point race. I was charging upwind on a J-35 under a blade and a single reef as the Electra zipped by surfing downwind at high speed. Twelve miles into a 19-mile race the Sport was sitting on top of the MORC fleet racing towards the finish.

Standing beside the boat in its slip, the ES looks low-slung and high tech, with a windowless cuddy-cabin, blunt bow and immaculate tooling and finish. I stepped on the Electra for a second time late in Ontario's sailing season. All afternoon before my test sail on the Electra, flags all along the lakeshore were flying straight off their poles, snapping loudly in a puffy north-est blow. As I pulled on my wet-weather gear, the breeze whistled through the rigging of the boats in the basin in ever-intensifying crescendos. Subconsciously, I was preparing myself for what I though was certain to be a gear-busting, hike-your-brains out, tie-up-at-the-dock-soaked-to-the-bone boat trial. Was I surprised.

With Joe Blair (a sailmaker from Funck's loft), I pushed off from our slip under jib alone, and began to short-tack out between the two rows of docks at the club. Our hoist of the main was made easy due to the Electra's standard lazy-jacks which hold the main neatly on the boom. Furthermore, both main and Genoa halyards travel through Harken deck organizers and lead to the edge of the dog house and are easily accessible to both crew and skipper. After we had the main up, and wailed on the vang, I quickly scanned the rest of the sail controls in the cockpit. Judging from the field of white caps out in front of us, I would have no time to think out in the open.

The Electra's powerful mainsail and mast are controlled by a 4:1 Harken ratcheting fiddle block mounted on a central barney-post. Without a traveller, mainsail twist is controlled reaching and running with a 6:1 purchase that cleats underneath the boom. The cunningham and all other secondary sail controls lead to either side of the hatchway, but are not double-ended to opposite sides of the boat. Genoa sheets lead to a single fairlead and then back to a Harken cam cleat. To help hiking crew re-enter the Electra, the builder, Paul Contouris from P. C. Mould of Erin, Ont., has mounted a flush set of Harken hand-holds. These little units, as we were to find out, came in handy. Before I knew it, we had sailed beyond the lee shore and were quickly accelerating out into in the confused water of Humber Bay.

As it was too late to consider reefing the main, we both dug our boots deeper into the hiking straps and held on for the ride. I immediately discovered that the round gunnels are perhaps one of the Electra's smartest features. These smoothed over the excruciating bum and thigh pain created by hiking on some boats across steep metal toe rails and sharp cockpit coamings and made leaning out comfortable. Out in the lake, we broad reached in gusty 25-knots winds, literally hopping fro wave to wave, surfing down one and popping onto the next. The Electra's flat run aft promoted surfing as we slalomed around the three-foot chop. I was particularly impressed with the responsiveness of the boat's large elliptical rudder as we banged-off a couple of sweeping, windsurfer-type gybes.

The rudder is evenly balanced and consequently the boat never develops any weather helm pull on your steering arm. While the helm of the Electra has a similar feel to that of the J/92, it is almost too balanced and forgiving. Because it doesn't really develop helm, the boat feels like it is always in perfect rim even when it perhaps isn't. It would be simple to induce a bit more feedback in the helm, however, by setting the rudder shaft slightly ore forward in the rudder blade. Although it's difficult to predict how fast we were travelling, based on the size of our boiling wake and my am-I-on-a-keelboat-or-a-Sea-doo? sensation, I imagine that we were surging up to nine or 10 knots.

Because of its large cockpit and open transom, the Electra gave me the impression that I was sailing on a boat much longer than 20 feet. By comparison, the cockpit of a 24-ft Shark, with its nasty high coaming and unfriendly angles, feels like a crowded sandbox. With two of us sitting hip to hip in this long cockpit we had ample room for another, say, Lightning crew if they wanted to come along for the ride! Another plus about the Electra's cockpit is that it kept the two of us almost completely dry even in the hairy conditions we sailed in that blustery afternoon. After what seemed to be barely more than 10 minutes of reaching out in into the lake, the Electra was well on its way across the Lake Ontario towards St. Catharines. As both of us wanted to be packed up before dark, we decided to turn the corner and head home.

Upwind in any small keelboat in more than 20 knots of breeze is never a picnic, but the two of us in a drop-hike position were able to carefully claw our way back to Mimico Creek where we began our test. While our speed was not nearly as impressive as it was between 90 and 180 degrees apparent, we still fought our way upwind smiling all the way. One regret is that Funck has not installed a cockpit floor-mounted traveller to help dump off the Electra's large main in the puffs. However, I'm confident that his and a couple of other hardware upgrades will significantly improve both the layout and sail-control systems of the Electra.

Originally published in Canadian Yachting's Winter 1993 issue.

Specifications

LOA            20 ft.

Beam            6 ft. 3 in.

Draft            3 ft. 3 in.

Ballast            300 lbs.

Weight            750 lbs.

Sail Area            1,095 sq. ft.

 

 

Related Articles

CY Virtual Video Boat Tours

Virtual Boat ToursWe all love boats and nothing can break us up! So, what better way to spend our time than looking at interesting boats and going aboard in a virtual ride or tour. We have asked our friends at various dealers and manufacturers to help us assemble a one-stop online resource to experience some of the most interesting boats on the market today. Where the CY Team has done a review, we connect you to that expert viewpoint. If you can’t go boating, you can almost experience the thrill via your screen. Not quite the same, but we hope you enjoy our fine tour collection.

 

Read more about the CY Virtual Boat Tours....................

 

 

 

Neptunus 750 Enclosed FlybridgeBy Andy Adams

In the February 2020 issue of Canadian Yachting magazine, we featured our review of the Neptunus 750 Flybridge, the company’s flagship yacht. The boat had been bought by a gentleman from Newfoundland and we reviewed it just before it was to be delivered.

We learned later that the boat did not leave immediately after delivery. The story is that the new owner reconsidered the beautiful big open flying bridge layout. 

Read More

Destinations

  • Prev
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...
Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to ...
Located in Lake Huron, the internationally significant Manitoulin Island is the largest freshwater ...
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...
Ontario’s best-kept secret, the Trent-Severn Waterway National Historic site holds the key to ...
Located on the sunny south shore of the harbour, the Marina is on pilings over the water, offering ...
The approach to the Chemainus Municipal Dock from Stuart Channel is straightforward and is ...
I leaned my head back into the water and floated easily. Having spent my childhood playing in ...
History: right after gym and just before chemistry class. Fifty minutes of naming the prime ...

View of Ganges HarbourText and Photos by Marianne Scott

Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to do with locally produced food. It started thousands of years ago when the Coast Salish First Nations used the Island as a summer camp, collecting wild foods while also processing the abundant sea food for winter sustenance.

In the 19th century, five main groups settled here and began farming: Northern Europeans—some of whom had abandoned gold rush dreams; Hawaiians brought here by Vancouver Island’s second governor, James Douglas...

Read More

Lifestyle

  • Prev
As a life-long marine journalist, it has often occurred to me, that it’s a big ...
Here’s a dramatic photo of the Week from Jansin Ozkur. “Walking along the lake Ontario, noticed the ...
At the end of summer 2020, amid all the restrictions, we were able to shoot our film, Generations ...
Last issue, Mike Wheatstone, our Boat Nerd started a conversation about solar power. While many of ...
Oak Bay Marina achieves eco-certification in Clean Marine BC, which helps boating facilities to ...
OK, stop the presses. This photo just came in from Beacon Bay. Clearly those folks know how to get ...
Back in the day, the publisher of a magazine would receive a bound copy of the year’s monthly ...
Boaters on BC’s West Coast have heard the story of the garbage pickers of the Marine debris removal ...
Skipper John “Drew” Plominski is hoping that lightning doesn’t strike twice. Plominski, whose boat ...
The Association provides a forum for exchanging information, tips and access an advocate on behalf ...

A Freedom Boat Club StafferAs a life-long marine journalist, it has often occurred to me, that it’s a big leap to lay out the cash, (especially for those with no previous boating experience), to try it out. How does someone even know that they will like boating it if they haven’t tried it? 

Well, joining a boat club, or a yacht club that has boats available for members to use, can get you started without the big financial commitment and with the support of the club’s education and resources. Try before you buy.


Read More

National Invasive Species Awareness WeekThis week, Feb. 22-26, is National Invasive Species Awareness Week and the American Boat and Yacht Council (ABYC) released an animated video to raise awareness about the threat Aquatic Invasive Species (AIS) pose to the boating industry and what manufacturers can do to limit the spread.

AIS can damage ecosystems and negatively impact fishing and the future of the boating lifestyle. Boat access to many aquatic resources has been limited due to AIS concerns and AIS infestation can result in serious damage to boats and their components. Invasive plant life can foul propellers,

Read More

DIY & How to

  • Prev
Insurance may not be exciting but it is important. Check at launch. We all know we need to spend ...
Before you launch: Inspect all around the hose clamps for rust and replace as necessary. Double ...
Slovenian manufacturer, Elan, has introduced the concept of regenerative electrical auxiliary power ...
There is nothing worse than your boat trailer breaking down while on the way to a great weekend. ...
When the boat is in the water, It’s easy to take for granted the parts of the boat that are under ...
The COVID-19 pandemic has created unexpected changes in our lives, impacting everything from ...
Boating boomed in 2020, with scads of first-time boat buyers chasing respite from the pandemic. Now ...
For anyone cruising on a boat that will be away from the dock for any appreciable time keeping the ...
Styles, shapes, pitch and diameter of props are widely discussed on online boating forums, YouTube ...
There’s nothing worse than wondering how much fuel you have on board. You’re left wondering how ...

So You Want to be a Better BoaterBy Amy Hogue

The COVID-19 pandemic has created unexpected changes in our lives, impacting everything from boating to vacations and these trends look to continue into the future.

In summer 2020, those trends were seen in the unprecedented numbers of boaters flocking to marinas and boat launches seeking a COVID-friendly vacation on the water. While the waterways were more crowded than ever before, the boaters you were likely to encounter weren’t necessarily in the know for boating etiquette, or marine know-how.

 

Read More

 

  

ask andrew bilge pumps 1 400By Andrew McDonald

One of the items that gets taken for granted during the spring prep work is the bilge pumping system; it’s one of those on-board features that many of us assume is in working order….until something goes wrong.

Water can get into your boat in a variety of ways: a leaking shaft-seal (stuffing box), ripped or torn bellows, a leaking through-hull, a leaking tank aboard, windows, hatches and deck fittings that aren’t sealed - the list goes on. The catch-22 when considering maintenance in the pre-season, is that you may not know where a leak may start or develop until the boat is in the water and only then do you find that water is getting inside.

Read More

 

  

Marine Products

  • Prev
The YETI Tundra 65 is their most versatile cooler, just as adept at keeping your catch cold as it ...
A good night’s sleep on the boat is a great pleasure indeed and custom bedding from SeaSwag ...
When bright white light is needed on board, a compact Sea Hawk-350 LED Light Bar from Hella marine ...
First time in many years I was lucky enough to test both the GMC Canyon and the Chevrolet Colorado ...
Unlike cars and homes, boats can be difficult spaces in which to create a quality listening ...
Yamaha Motor Canada has launched an upgraded 4.2-litre V MAX SHO® outboard, offering a full 40 ...
Holidays are perfect times for daydreaming and anyone who loves boating, will love ...
Bringing back a boat's showroom shine is fast and easy with the award-winning World's Best Dual ...
The JBL Click Bluetooth® wireless controller from Prospec Electronics adds fingertip control of ...

News

  • Prev
According to the Nova Scotia Tourism website, Theodore Tugboat began his travels in 1989, created ...
On Monday, March 29th, fire broke out in a group of power boats stored on the hard and still under ...
On April 1st, 2021, Wright’s Marina joined two other small, independent facilities: Hindson Marina ...
Our new feature is CYOB’s look at boats and food – two words that are almost synonyms! That’s a lot ...
This Maritime Radio ONLINE SELF-STUDY program is a completely integrated version of Canadian Power ...
Finding the right PFD can seem like a daunting task and extends beyond finding one that fits and ...
I start off my column by saying Wow!!  What a market! I have never seen such panic buying in ...
Yanmar Holdings has entered into a collaboration with design house “fragment design”, headed by ...
From January 25 - March 31, Parks Canada is asking the public to read its Draft Management ...
As the most innovative family-run boatyard in Europe, time and again Frauscher's premium ...

invasive species video 400AIS can damage ecosystems and negatively impact fishing and the future of the boating lifestyle. Boat access to many aquatic resources has been limited due to AIS concerns and AIS infestation can result in serious damage to boats and their components. Invasive plant life can foul propellers, jam impellors and cause bilge pump failure. Mussels can attach to boats and negatively affect performance, attach to engines causing component failure, and obstruct water lines causing system failure.

Read more....

 

 

fibreglass recycling part2 400 By Jay Weaver

Interest in finding alternative uses for used fiberglass can spark creativity and innovation. For example, a partnership involving the US, Ireland, and Northern Ireland Universities called Re-wind developed some interesting civil engineering project ideas for reusing and repurposing fiberglass blades. These include using decommissioned blades in civil engineering projects as part of powerline structures or towers, or roofs for emergency or affordable housing. In Northern Ireland, Re-wind is also considering piloting them for use in pedestrian bridges along greenways.

Read More about Fiberglass recycling....

 

 

Theodore TugboatAccording to the Nova Scotia Tourism website, Theodore Tugboat began his travels in 1989, created by Cochran Entertainment, with master model maker Fred Allen, as a children's television series inspired by the Halifax Waterfront and the stories Andrew Cochran would tell his son at bedtime. The CBC television program Theodore Tugboat ran from 1993 to 2001.

A working replica of Theodore, named "Theodore Too" was built in Dayspring, Nova Scotia. Designed by Fred Allen and Marius Lengkeek, the tug was launched on April 19, 2000 at the Snyder Shipyard. After a successful tour of several North America ports, it made its home in Halifax. 

Read More