power-sea_sonic_270_centaur-largePower and elegance has always been a winning combination when it comes to building a boat that people will walk down the dock to take a second look at. This is exactly what British Columbian craftsman, Chris Casparis, has achieved with the 28-foot, Sea Sonic Centaur – a boat that people actually do walk down the dock to see and take pictures of at boat shows and launch ramps around Okanagan Lake.

The Centaur looks like it was built in another era. It's cold-molded, plywood-on-frame construction allows it to have beautiful flowing lines with few sharp angles. Casparis, who learned the art of fine woodworking and boat building in Switzerland before immigrating to BC's southern interior, has ensured that the boat's lines – from its shear -to the innovative sliding hatch for the cuddy – curve and gently bend defying common joinery techniques.

Despite the fact that the Centaur's construction techniques and materials are the most modern available, wooden boat purists will love this craft for the way it is finished.

What strikes you most is its overall appearance, which threatens to become an almost 1950s retro look. The forward sections of the semi-displacement hull are rendered white, while the shear line, aft stations and transom are bright finished mahogany.

The deck is laid-up by framing lightly stained mahogany strips, separated by blond Canadian maple dividers, with mahogany planking stained a richer red. The hull-deck joint is more of a confluence of wood than a hard edge.

Thematically, the use of wood carries on into the cockpit, but doesn't become overbearing. The cockpit is graced with a flip-up bolster seat for two and a circular settee where guests can stretch out to enjoy their day out on the water without feeling like they're missing any of the fun. These are upholstered in white leatherette to provide a comfortable place to sit and they also give the eye some relief from too much wood.

Sun worshippers have not been forgotten either. A large cushioned sun deck (which hides the boat's engine room) has been placed aft of the cockpit on the back deck.

A wet bar on the port side of the cockpit ensures that all the necessities of life are available including a discreetly placed Clarion sound system that provides music throughout the cockpit.

Where some boat manufacturers simply stick on a swim platform that looks more like an afterthought than a planned appendage, the Centaur's transom features a molded platform with a step leading to the aft deck.

For skiers and wake-boarders, there is a towing eye and hide-away boarding ladder incorporated into the transom and swim platform. Neither is so in-your-face macho as to disturb the efforts Casparis has put into shaping the stern of his boat.

Driving the Centaur is a pleasure. The chrome-finished instruments are set into a mahogany dashboard. The dual instruments (this is a twin-engine boat) are all analog in keeping with the retro feel, but Casparis has wisely included a Raytheon digital speed log/depth sounder and it does not look amiss with the other equipment.

Interestingly, the wheel is a composite (graphite), which provides some relief again from the intensity of too much wood.

Deck hardware is all custom. Casparis has designed each disappearing cleat and chock to fit with the look of the boat. They are first cast in bronze, then chromed and mounted with epoxy and through deck fasteners.

Casparis took his influence for this exquisite luxury runabout from the great mahogany craft, like the Riva, which ply the southern European waters of Venice and Lake Geneva.

Going back to the idea that this boat would not look out of place on the Grand Canal, its construction is as up-to-date as can be.

The hull framing consists of fab'ed up longitudinal members – like the engineered beams now used in housing construction – laminated in place on a frame of solid wood ribbing. This gives the frame a strength that solid plank construction cannot offer.

Sheeting on the hull is a double thickness of mahogany ply sandwiching a layer of Kevlar cloth between the inner and outer skins. The skins and Kevlar cloth are laminated with a high strength epoxy and once the shaping and sanding are finished the entire hull is sealed in epoxy. This ensures that, unlike many other wooden boats, the Centaur will never suffer from dry rot or water damage.

Modern design thought saw production manufacturers shift to planing hulls. The reason was simple – less energy expended for more speed. Sounds good, but there were some sacrifices that had to be made, like poorer performance and a rougher ride in heavier sea conditions.

The Centaur's semi-displacement hull gives passengers a smoother experience in big waves because it cuts through them and does not skip from crest to crest.

Still, in calmer waters, where a lot of the fun of boating is in going fast, the Centaur performs admirably by picking up its skirts and getting up on plane in 8.3 seconds and hitting her top end of 68 mph in 14 seconds.

Okay, it is not as fast as an offshore look-alike, but the comfort of the ride goes a long way to offsetting the speed.

To power the test boat, Sea Sonic dropped tandem 496 HO MerCruisers in and coupled them with two Velvet Hydraulic Drive transmissions driving a set of 15-inch bronze props.

The exceptionally quiet engines are on separate throttles and the driver must keep an eye on the tachometer and listen to their pitch to keep them balanced. Like a Ferrari, this is a driver's boat rather than a high-powered Chrysler family sedan; it requires skill and concentration to get the most out of it.

Putting it through its paces, the Centaur's dual rudders glided it gracefully through a set of tight turns at medium speeds and did not skid through them at higher speeds like a planing hull would.

Calling the boat a runabout is a misnomer. It has a fairly heavy hull and does not tow all that easily without a powerful tow vehicle. Still, once it is in the water, it is a joy to look at and drive.

Suffice to say, there are reproduction boats around, recalling the heyday of wooden runabouts, which try to pick up on the market for those who truly love wooden boats, but not since the legendary Vic Carpenter hung up his plane and square has anyone in North America produced anything coming close to this machine.

By Bruce Kemp

To see if this boat is available, go to www.boatcan.com to check listings!

Related Articles

 

 

Beneteau Oceanis Yacht 54By Zuzana Prochazka

Beneteau saw an opportunity to add a little thrill to any cruising adventure, so they took the hull of the First 53 racer (introduced just last year), and with a few fashionable changes, created the Oceanis Yacht 54, the new entry-level of Beneteau’s swanky Oceanis Yacht line. The result is a performance cruiser that sails like a witch and looks like a grande dame.

Design

Roberto Biscontini is the naval architect and Lorenzo Argento created the details of the exterior and interior design. 

Read More

Destinations

  • Prev
Over the course of four days in September 1864, representatives from Prince Edward Island, Nova ...
The new owners of L’Orignal Marina offer boaters a new destination. Located in a charming ...
Commemorating 100 (+1) years of through-navigation on the Trent-Severn Waterway National Historic ...
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...
Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to ...
Located in Lake Huron, the internationally significant Manitoulin Island is the largest freshwater ...
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...

Riverest MarinaThe new owners of L’Orignal Marina offer boaters a new destination. Located in a charming francophone village in Eastern Ontario, this joined marina and restaurant venue is the ambitious initiative of long-time entrepreneur André Chabot and biologist Alexandra Quester, both residents of L’Orignal.

The purchase of the L’Orignal Marina was made official in November 2020. The new year was barely underway when all 50 available slips were already reserved. No wonder the addition of member and visitor slips is already planned for the 2022 season – the 2021 count is up to 62 power and sail already. At the moment, the Riverest Marina offers boaters a stop where they can launch their boat...

Read More

Lifestyle

  • Prev
Last issue we featured a story about the engagement proposal aboard Via-Mara, a 1969 Trojan 42 Aft ...
With thanks to Sail Canada, here’s a collection of photos that are Olympic quality. Clearly our ...
Wow. That was a lot of fun reading the collection of boat names that came in from all over the ...
No individual had a greater impact on the modern sport of sailing than Bruce Kirby. Known and ...
Just off The Ocean Race European Tour, Daniel is setting his sights on competing in The Ocean Race ...
After being our fearless leader and publisher since CYOB kicked off, Greg Nicoll, handed over the ...
Swim Drink Fish is spearheading the Vancouver Plastic Cleanup by installing, maintaining, and ...
With but four weeks to go, Sarah is in Japan, staying safe while acclimatizing to the heat at ...
MJM is a different kind of boat builder, second generation family owned and operated, we design and ...
Stuart Hendrie, a pro photographer sent along this photo of the pirate ship in Jordan Ontario. Many ...

DIY & How to

  • Prev
It’s a scary thought - whether your boat is made of wood, fiberglass, aluminum or composite – it’s ...
It’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – ...
Last summer there was tremendous interest in buying a boat to have fun in the restricted world ...
The boat buying or selling market is hot now and has been since the late spring of 2020. Sean ...
Last issue we got up with Montreal sailor Marc Robic who has accumulated a lot of tips and tricks ...
While some parts of the country are lucky enough to have year-round boating, there are plenty of ...
A Transducer is a device that is installed below the waterline that provides underwater data to a ...
Spring has finally sprung! At least it has weather wise here in Montreal, so it is with great ...
For most of us, the thrill of being aboard is associated with the motion of the water, wind in our ...
An important, but often overlooked maintenance item on any type of boat is it’s steering system. ...

Galvanic CorrosionIt’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – it’s slowly deteriorating under you. Part of this is the nature of the marine environment: Sun, moisture, waves, wind, movement and vibration all contribute to components breaking down.

But there are other factors that are much more concerning and act at a significantly faster rate that the environment can take credit for. One of these is commonly spoken of, but not terribly well understood: Corrosion. As boaters, we’re concerned with two main types of corrosion: Galvanic and Stray-Current. This edition will focus on galvanic corrosion – in two weeks, stay tuned for info on stray-current.

Read More

 

  

Marine Products

  • Prev
AkzoNobel Yacht Coatings has introduced a new, easier to apply topside system with two new products ...
Whether for news, weather or just to watch the game, onboard television reception is important. But ...
Kanvaslight® was specifically engineered for a long life in a salty, sun-drenched environment. The ...
Watermakers take ocean water and create perfect drinking water using reverse osmosis. A Schenker ...
If you’re headed out for a weekend afloat or on a week-long cruise you often must park your vehicle ...
Ten years ago, St. Margaret’s Bay (Halifax), Nova Scotia-based SailTimer Inc. made the first ...
Between the odor and working in confined spaces, replacing an onboard sanitation line is never a ...
For many boat owners who have gear to tote and the occasional stretch of bumpy road to negotiate, a ...
The 2022 Sea-Doo Switch is a re-imagined pontoon that makes hitting the water more accessible than ...
On the water audiophile-quality sound is attainable with the new JBL-R3500 source unit. The latest ...

News

  • Prev
Royal Canadian Yacht Club’s Defiant completed a six-race sweep of the Cup for Canada over Zing, the ...
On September 6, Groupe Beneteau laid out its course to develop new boating experiences, new ...
Last Friday, the first ever Canada’s Celebration of Sailing honoured the season for Sailing in ...
Boating Ontario is very proud to have Transport Canada’s Office of Boating Safety jump on ...
Montreal-based Vision Marine Technologies, Inc. is headed to the Lake of the Ozarks Shootout to ...
Summer is in full swing with Canadians enjoying time outside and on the water. So, while enjoying ...
On July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor ...
HanseYachts AG presents RYCK, its third motorboat brand carrying the "Made in Germany" label. The ...
“We are all proud of our athletes and coaches who have dedicated themselves to push Canadian ...
Collingwood, ON hq’d Limestone Boat Company – owner and builder of Aquasport Boats, Limestone Boats ...

Mia and Caleb's EngagementOn July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor Yacht in Oromocto NB. (That piece was also expanded in CY magazine later in the year.)

One of our Canadian Yachting contributors, Denise Miller, had shared the article on my social media and a young man reached out and asked if she could connect him with the owners of the boat, Dave and Barb. Denise leapt into action and Dave and Barb were thrilled. They concocted a plan that the young lady, Mia, thought she was coming to model for a sales brochure for Dave to do charter tours.

Read More