Beneteau523250Our first stop was the Beneteau wood facility in St. Gilles Croix de Vie. Here Beneteau streamlines their production process for all of their manufacturing plants by producing every wood kit for every boat in every line, including: Beneteau Oceanis, Beneteau Cyclades, Jeanneau, Waquiez, Lagoon and all their power boats as well, including kits for the USA plant. These kits are shipped on a just-in-time basis to minimize storage requirements at each factory; a container is shipped weekly to the USA factory.

Now think about that…every wood part for every size of boat, on every brand they build. That is a mind-boggling number of parts, not to mention the fact that each brand has a different wood finish and colour. Wood grains are recorded for each part in each boat to make replacements (if needed) down the road a bit easier. It all seems complicated, but if you remove any wood piece from your Beneteau, you’ll find a code number branded on it that indicates shape, finish, colour and grain needed for replacement.

The wood factory consists of several buildings that are clean, efficient and full of computer controlled milling and cutting machines. Some of their proprietary processes, namely in varnishing, we were not allowed to photograph so let’s just leave it at ‘Wow’!

[From there, we were whisked off in a Renault by our superb guide, Mr. Yves Mandin, to what Beneteau refers to as the “Big Boat Factory” also in St Gilles, just 10 minutes down the road. The big boat factory is home to the Beneteau 57, 523 and two lines of Lagoon 440s. At tour time, they were also gearing up on the new First 50.

Our interest was specifically in the creation of the 523, which we learned a lot about from our knowledgeable tour guide. As with most boat production facilities, the glasswork and assembly lines are separated for obvious reasons. Touring through the glass side of the plant, we were amazed by the efficiencies–once again–of the world’s biggest yacht builder. In the fiberglass shop, each piece of woven glass is cut from patterns for each yacht, and then labeled in green or red to indicate the side of the mold it is being glassed into. With a rack of fiberglass patterns wheeled out to each mold, the assemblers can glass in the appropriate matt in the proper order without any fitting or time delays. It also helps control the amount of material and thus the final weight of each glassed product being produced.

Over to the assembly side of the factory, four hulls and two decks are found in various states of completion for each line. Decks and deck liners are pre-assembled with all their lights and wiring harnesses, hatches and fittings prior to being mated with the hull. Wood kits are assembled beside each hull in the form of a galley or settee kit or engine housing and then dropped into the hull as a pre-assembled unit. With the boats shuffled up one spot approximately each week, a new yacht comes off the line at the rate of one per week, or in the Lagoon 440 case, two per week.

The 523 is a massive hull form when you step into one un-assembled. The trademark Beneteau hull grid is the first item assembled into a bare hull and is the backbone of the assembly process. It not only provides the template for the assembly of a two, three, four or five cabin floor plan option but it also houses the 900L water tanks, supports the engine, pins the rigging and provides multiple highways for wiring and plumbing routes. Again, Beneteau shines here as each wire (and there are thousands) is not only cut to the approximate size before installation but is also individually numbered for assembly and future service.

All yachts on the line are floated and rained on in the test tank for 24 hours upon completion to check for leaks, engine service and any plumbing concerns.

Our much anticipated 523 test sail was a 45-minute country drive down the coast of France to Les Sables d’Olonne, home of the famous Vendee Globe race. A quaint little fishing town within a boat building community (also home to Privilege cats), you’ll never find a day when at least a dozen shiny new yachts aren’t being commissioned in the harbour.

A short walk down the main dock, we pass five Lagoon 440s being readied for transats to the Caribbean, we found the tall 9/10th’s rig of the 523 standing above all else.

First Impressions

Immediately, we were drawn to the huge cockpit space and helm area. She is similar to the old Beneteau 50 in terms of looks, but her size is deceiving. The additional one and half feet of beam and 3 feet of length add immense proportions. Where the old 50 would fit 6 around the cockpit table, the 523 now sits 8-10. The helm easily accommodates two at each of the two wheels and the space continues to impress down below as well. Our yacht is a rare five-cabin version with each of the cabins housing a full queen width and plenty of length for my 6’4” frame. The heads are big with loads of legroom when ‘sitting’ and are clearly one of the more comfortable spaces for showering on any yacht I’ve been on. The 5th cabin, formerly known as the crew cabin, is now a fully finished double with an enclosed head and shower. No more bunks and a toilet on the floor!

The 5th cabin is accessible by the traditional deck hatch and ladder (if captained crew is aboard) or by a clever doorway cut through to the forward starboard cabin.

The main salon is very similar to the old 50 but the extra beam adds plenty of volume and storage capacity. A microwave, front-loading fridge, full size separate freezer, leather seating and an extendable table make for comfortable living quarters. The chart table/nav station is big enough to lay out those old things called charts but more importantly these days, provides 12V and 110V (through the inverter) to power laptops and ipods. The European galley backed up with the bench seating adds security and makes cooking during a passage very simple. There are solid areas to grab everywhere you look, beautiful wood finishes and plenty of light.

On the Move

We cranked up the 100hp turbo-charged Yanmar, throttled the bow thruster and headed out of the harbour smoothly, under a barely audible powerhouse at about 7 knots. A glassed-in shaft, excellent engine compartment insulation and a standard three-blade folder make for an excellent drive-train combination with no vibration.

Raising the main with the power halyard winch was a breeze and the fully battened main behaved well on the way up through the lazy jacks. With the 130% furling genoa powered up we cruised along at about 8 knots upwind on a 14-18 knot day with eight-foot rollers coming across the Bay of Biscay. She handled effortlessly with little or no weather helm. With the breeze building to 20, we bore off and reached along clearing 10 knots, all in complete control with fantastic visibility and in total comfort from her 35,000-pound displacement, high topsides and relatively low profile deck. One thing boat builders seem to be skimping on these days is winches but the two big Harken #66s aboard handled their duties with ease.

The Beneteau / Groupe Finot team should be proud of what they have accomplished in this project … a big ocean capable yacht, easy to sail, built to high standards with quality hardware.

Our only complaint after a 28-day, 4,500 mile delivery across the Atlantic to her new home in Tortola, BVI, was with respect to the demands of the 800 amp hour battery bank–host of lighting, Lewmar windlass, bow thruster, fridge and freezer. The factory-installed, single 80 amp alternator had to be replaced by double, 120 amp Balmars to give this huge bank of batteries their much needed replenishment. Hopefully, Beneteau will upgrade this in future hulls or perhaps put a generator in as a standard item as they do in their 57.

“Nanuk” – this Beneteau 523, five cabin, five head beauty – is available for bareboat or crewed charter in Tortola, BVI, from www.mangoyachtcharters.com

www.beneteau.com

To see if this boat is available, go to http://www.boatcan.com for listings!

By Patrick Festing-Smith

 

 

Related Articles

 

 

Viko S35

By Katherine Stone

I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats on champagne fall days when many boats are either being hauled for the winter, or are already under shrink-wrap.

Not only are there great winds – usually offshore, but welcome sunshine and open waters with few boats out enjoying the last days of September. Joining me for the test sail of the Viko S35 was the former publisher of Canadian Yachting, Greg Nicoll, and the Canadian Viko Yachts representative, Eric Beauregard, who had driven down from Montreal.

Read More

 

 

Four Winns H4

 

Four Winns H4By Andy Adams

The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and the new H4 is a great example of how the design and engineering resources of Beneteau can up the game even for a brand like Four Winns that has a long and distinguished history.

The Cadillac Michigan-built H4 is a brand-new design this year and we think it's especially handsome. The vertical stem bow is all new and innovative. It is a design feature that was chosen to give Four Winns and the H4 a sense of modern and contemporary look while the stern remains more traditional. 

Read More

Destinations

  • Prev
It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul ...
Cowichan Bay is a waterfront village with a row of shops, artisan products, marine supplies and a ...
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

West Side Story

by Jennifer M. Smith, drone photos by Alex Nikolajevich

It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul out was still over a month away. The question was: where to now? Friends in Meaford often suggested we sail in for a visit. We never had because we’d always moved north-south on the east side of Georgian Bay. This year we were up for something different. This was the perfect opportunity to cruise the west side of the bay.

We made the 10 a.m. bridge out of Little Current and motor-sailed east southeast in light northerlies. We’d often sailed past Snug Harbour, a nearly land-locked anchorage on the north side of Lansdowne Channel because the chart suggested we’d never make it in there with our six-foot draft. 

Read More

Lifestyle

  • Prev
This week’s Photo of the Week comes from BC. The 99th Grey Creek Regatta was held at the Lakeview ...
Back in 2019 (I believe) your magazine used a pic of Sweet Love, a Ranger Tug 31, in a photo ...
a few shots of my wife Maggie practicing her silks routine on our 1982 C&C in the North Channel ...
Last issue, we took a look at boat names. Little did we know we would get what probably will be the ...
Boat names and puns go together like …. Well, like nothing else. Here’s a couple shared by our pal ...
Frequent Windsor racing contributor to Sailing in Canada Roger Renaud, caught this gorgeous ...
The Kingston Yacht Club (KYC) celebrated its 125th anniversary in the summer of 2021, in all the ...
A study on water levels projects an unprecedented drop of water levels on Lakes Michigan-Huron and ...
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
You’ve invested thousands and thousands of dollars into your boat so naturally, you want to find ...

DIY & How to

  • Prev
Do you have abnormal engine vibration; rubber dust around engine mounts; telltale signs of possible ...
As Thanksgiving heads our way, it tends to be the ‘last hurrah’ on many fronts:  the last long ...
As the busy season starts to wind down, many boaters turn to the maintenance that has been ...
Unlike a car that moves (and requires control) left and right (and perhaps, if you’re an ...
Our boats are now on the water after a couple of really unusual years – if we did get out it was ...
Last issue of CYOB, we discussed stay and shroud tension and how these adjustments can affect ...
I was recently reading a number of Facebook posts from sailboat owners’ groups, wondering why their ...
After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and ...
Sails are attached to the sailboat rig using several different systems. Let’s begin with mainsail. ...
I’ve always thought that where safety is concerned aboard, it should be the same whether the boat ...

Supplies and Colour Matching

by Marc Robic

After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and had many small pinholes and minor surface cracks. These pinholes are mostly caused by small air pockets that lay just below the gelcoat surface. Of course, this is exacerbated by particles such as small rocks or debris under shoes, dropped winch handles, etc.

Luckily, Catalina Yachts is still very much in business and are very helpful when owners have questions or need parts. I ordered a small quantity of original formula Catalina grey and white gelcoat for my model and year.

Read More

 

  

Marine Products

  • Prev
What happened. Where did our summer go? Well, never mind that, it’s time to start thinking about ...
Cruising boaters visiting new destinations can face challenges when the marina's shorepower system ...
Worn plastic hatch covers can detract from a boat's appearance and its functionality, especially ...
The first builder of electric boats, founded in 1893, Elco now introduces new designs of its EP-6, ...
More than 3/4 of all recreational boats (power and sail) are under 26 feet and towable.
One of the top requests in the electrification of water transport is for a jet ski that can deliver ...
Many boat toilets have dimensions similar to a five-gallon bucket—and are nearly as uncomfortable. ...
Working alongside a US-based designer and boat building company, Burlington ON-based MarsKeel ...
It’s still vacation time and that means calories don’t count. The Boat Galley Cookbook: 800 ...
Words of exasperation wafting across a marina often signal a boat owner fighting with a jammed ...

News

  • Prev
Parks Canada advises that the Kirkfield Lift Lock will begin single-chamber lockages for through ...
The Four Winns TH36 Catamaran had its world premiere at the Cannes Yachting Festival, September ...
After borrowing boats for a couple of years, longtime J105 fanatic and many-year organizer of the ...
Due to ongoing mechanical issues, the Kirkfield Lift Lock will remain closed for the foreseeable ...
BCI Marine is announcing that it will become Canada's distributor of OXE Marine's ...
US Team Zing’s increased boat speed and improved crew work were no match for the extraordinary crew ...
Vision Marine, founded in Montreal and currently based in Boisbriand QC, in partnership with ...
On Sunday, August 21, the Royal Canadian Yacht Club (RCYC) held its fourth annual ...
While there’s still some good weather left, let’s take a moment to celebrate this summer. Sunny, ...
Light air conditions prevented racing on Saturday, which meant there were three fleet races on ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More