A Great Cruiser with Solid Performance.

Right from the dock, bucking the current, I felt at home in this boat. Great visibility and solid, wonderfully light steering beat the expectations I had. Setting sail with the 135 overlapping genoa, the boats solid upwind tracking (it was easy to find the grove) was evidenced by speeds approaching 7 knots on relative flat sea conditions. In the puffs, the boat was stiff and responded well to the odd sail tweak ajustment. The Elvstrom sails that come standard on this boat are perfect; they fit the spar well and are some of the best sails I have seen in production boats anywhere.

Bavaria is a well-built boat as evidenced by our recent factory tour. Go to www.canadianyachting.ca for the full story! The detail treatments and wonderful workflow and marvellous facility all contribute to a tremendous value proposition. I found no evidence of bad fit or finish anywhere on this boat; the computer technology used provides a nice finish within the cabin joinery. Built for cruising and lots of on water time, this is a robust boat, boasting wide deck passages forward along with cabin top mount hand rails the running the full length.

This boat is configured from four moulded components: hull, deck, the underside of the deck and the interior – which acts like a reinforcement for the hull and the foundation for the cabinetry and furniture components. The interior component is glued to the hull while the hull deck joint is glued and bolted through the hull deck components and mounted independently. Below the water line, the hull uses a special resin cured to provide a solid laminate relying on a sandwich-laminate on the part of the hull that sits above water and in the deck. This technique adds to the stiffness of the hull considerably. For extra reinforcement – to minimize collision damage –Aramid fibers are used. (These fibers are common in aerospace and military applications such as body amour where the curing process of the molecules adds to the strength.)

There are a few neat touches on this boat, from the hidden electric swim platform designed to complete the solid transom look and the wonderful cockpit configuration. Above decks the layout and functionality is well done and the fittings are all well known brand names. The huge starboard locker leaves the ability to drop in a gen set or customize for your storage needs. I like it when builders leave some options, going overboard and designing a storage locker for the masses is a tough call. The mainsheet system is functional and easy to get used too. While all the running rigging is easy to get to and operate, I would add a folding wheel and hydraulic backstay set up. The Furlex furling system works well too with its lead off to port.

The Selden double spreader rig is stepped at the deck and supported nicely with a flush bulkhead section below decks. Below decks the triple cabin layout has a wonderful feel, it’s big and bright with standing headroom throughout. The non-skid, cupped steps below are beautifully done and along with nice handrails access will be safe and easy in any condition. The teak and holly floor treatment adds to the sense of size. The numerous hatches and window portlights allow for tremendous light and super cross ventilation. To port, the galley has solid workspace, great storage and neat integration with the cabin salon. The fridge is well placed and deep enough for any extended cruise. Opposite, the navigation station is large and there is excellent storage. The electrical panel provides easy access and there is tons of room to add a chart plotter and other electronics.

In the main salon, the folding dining table has easy sitting for a group of six through its accompanying side settees. These can also be used as berths if required.

Forward, the fore cabin has a nice hanging locker on the port side with a complimentary shelved cabinet to starboard. Under the double berth, further storage is possible with well hung cabinets above the berth and a drawer below. Again headroom is maintained forward as well.

The aft cabin is welcoming and perfect for a second couple or kids. Access to plumbing and steering systems is through panels in this cabin and are easy enough to access. Storage is possible with the hanging closet and shelf system that wrap the cabin designed around the 6 ft. 8 in. berth.

Aft, behind the nav station, the head is bright and it’s well done with its teak grate shower sump cover and more than adequate cabinetry and storage. Access to the water tanks and engine oil is possible through panel doors.

All in all a wonderful boat for its size and niche and a boat one must add to their shopping list.

By John Kerr

To see if this boat is available, go to www.boatcan.com to check listings!

 

 

 

 

Related Articles

 

 

Viko S35

By Katherine Stone

I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats on champagne fall days when many boats are either being hauled for the winter, or are already under shrink-wrap.

Not only are there great winds – usually offshore, but welcome sunshine and open waters with few boats out enjoying the last days of September. Joining me for the test sail of the Viko S35 was the former publisher of Canadian Yachting, Greg Nicoll, and the Canadian Viko Yachts representative, Eric Beauregard, who had driven down from Montreal.

Read More

 

 

Four Winns H4

 

Four Winns H4By Andy Adams

The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and the new H4 is a great example of how the design and engineering resources of Beneteau can up the game even for a brand like Four Winns that has a long and distinguished history.

The Cadillac Michigan-built H4 is a brand-new design this year and we think it's especially handsome. The vertical stem bow is all new and innovative. It is a design feature that was chosen to give Four Winns and the H4 a sense of modern and contemporary look while the stern remains more traditional. 

Read More

Destinations

  • Prev
It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul ...
Cowichan Bay is a waterfront village with a row of shops, artisan products, marine supplies and a ...
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

West Side Story

by Jennifer M. Smith, drone photos by Alex Nikolajevich

It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul out was still over a month away. The question was: where to now? Friends in Meaford often suggested we sail in for a visit. We never had because we’d always moved north-south on the east side of Georgian Bay. This year we were up for something different. This was the perfect opportunity to cruise the west side of the bay.

We made the 10 a.m. bridge out of Little Current and motor-sailed east southeast in light northerlies. We’d often sailed past Snug Harbour, a nearly land-locked anchorage on the north side of Lansdowne Channel because the chart suggested we’d never make it in there with our six-foot draft. 

Read More

Lifestyle

  • Prev
This week’s Photo of the Week comes from BC. The 99th Grey Creek Regatta was held at the Lakeview ...
Back in 2019 (I believe) your magazine used a pic of Sweet Love, a Ranger Tug 31, in a photo ...
a few shots of my wife Maggie practicing her silks routine on our 1982 C&C in the North Channel ...
Last issue, we took a look at boat names. Little did we know we would get what probably will be the ...
Boat names and puns go together like …. Well, like nothing else. Here’s a couple shared by our pal ...
Frequent Windsor racing contributor to Sailing in Canada Roger Renaud, caught this gorgeous ...
The Kingston Yacht Club (KYC) celebrated its 125th anniversary in the summer of 2021, in all the ...
A study on water levels projects an unprecedented drop of water levels on Lakes Michigan-Huron and ...
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
You’ve invested thousands and thousands of dollars into your boat so naturally, you want to find ...

DIY & How to

  • Prev
Do you have abnormal engine vibration; rubber dust around engine mounts; telltale signs of possible ...
As Thanksgiving heads our way, it tends to be the ‘last hurrah’ on many fronts:  the last long ...
As the busy season starts to wind down, many boaters turn to the maintenance that has been ...
Unlike a car that moves (and requires control) left and right (and perhaps, if you’re an ...
Our boats are now on the water after a couple of really unusual years – if we did get out it was ...
Last issue of CYOB, we discussed stay and shroud tension and how these adjustments can affect ...
I was recently reading a number of Facebook posts from sailboat owners’ groups, wondering why their ...
After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and ...
Sails are attached to the sailboat rig using several different systems. Let’s begin with mainsail. ...
I’ve always thought that where safety is concerned aboard, it should be the same whether the boat ...

Supplies and Colour Matching

by Marc Robic

After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and had many small pinholes and minor surface cracks. These pinholes are mostly caused by small air pockets that lay just below the gelcoat surface. Of course, this is exacerbated by particles such as small rocks or debris under shoes, dropped winch handles, etc.

Luckily, Catalina Yachts is still very much in business and are very helpful when owners have questions or need parts. I ordered a small quantity of original formula Catalina grey and white gelcoat for my model and year.

Read More

 

  

Marine Products

  • Prev
What happened. Where did our summer go? Well, never mind that, it’s time to start thinking about ...
Cruising boaters visiting new destinations can face challenges when the marina's shorepower system ...
Worn plastic hatch covers can detract from a boat's appearance and its functionality, especially ...
The first builder of electric boats, founded in 1893, Elco now introduces new designs of its EP-6, ...
More than 3/4 of all recreational boats (power and sail) are under 26 feet and towable.
One of the top requests in the electrification of water transport is for a jet ski that can deliver ...
Many boat toilets have dimensions similar to a five-gallon bucket—and are nearly as uncomfortable. ...
Working alongside a US-based designer and boat building company, Burlington ON-based MarsKeel ...
It’s still vacation time and that means calories don’t count. The Boat Galley Cookbook: 800 ...
Words of exasperation wafting across a marina often signal a boat owner fighting with a jammed ...

News

  • Prev
Parks Canada advises that the Kirkfield Lift Lock will begin single-chamber lockages for through ...
The Four Winns TH36 Catamaran had its world premiere at the Cannes Yachting Festival, September ...
After borrowing boats for a couple of years, longtime J105 fanatic and many-year organizer of the ...
Due to ongoing mechanical issues, the Kirkfield Lift Lock will remain closed for the foreseeable ...
BCI Marine is announcing that it will become Canada's distributor of OXE Marine's ...
US Team Zing’s increased boat speed and improved crew work were no match for the extraordinary crew ...
Vision Marine, founded in Montreal and currently based in Boisbriand QC, in partnership with ...
On Sunday, August 21, the Royal Canadian Yacht Club (RCYC) held its fourth annual ...
While there’s still some good weather left, let’s take a moment to celebrate this summer. Sunny, ...
Light air conditions prevented racing on Saturday, which meant there were three fleet races on ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More