There are many reviews for the Odin 820, a 28’ motor sailor that includes the comparisons to others like her in the market place. This is not one of them. All that good stuff can be found on the website www.odin-marine.com. Me, I’m a traditional keel boater. I love getting a thoroughbred boat well-tuned with the rail down, going as fast as we can with all the excitement of pushing the boat to her limits. Seeing the water creaming down the hull of a go fast sailboat gives me as much of a thrill at 60 as it did at 20.

Now along comes Bernie Benovitch, the Canadian distributor for Odin and a friend of mine. He asked me to go for a ride on the 820 to experience the boat and get my comments. I must admit I was not expecting much, however, read on.

I got the cooks tour, up, down and around the boat to poke into every nook and cranny, opening everything I could. My first impressions were good. Well-appointed with lots of space, good mechanics and attention to detail that is readily evident. There was ample comfort for my 6’, 200 lbs frame for standing, sleeping and sitting. The galley is functional and stylish. Access to cupboards, storage and mechanics is easy and innovative. There’s lots of room on this boat!

Ok–let’s go. Getting off the dock was no hassle. In fact, it was quite easy compared to a fixed drive. We started with the motoring performance. A 75hp Honda 4-stroke got us up quickly on plane and the maneuverability was as good as many power boats I’ve handled in a light chop. There were some cavitations on really tight turns that were not a concern. I held our speed at about 18 knots but felt I could get more out it. Then poof, we ran out gas. I suspect Bernie did this on purpose so that he could show off how easy it is to refill on board from a gas can. Quite simple.

Now for the sailing. Open water ballast, up engine, down rudders and board. All within minutes. Quite impressive. Hoisting sail is a snap. The jib is furled and the main is in a cradle pack. This makes for a minimum of on deck time with no need to handle the sails. The breeze was light at 8 knots that I knew would not stress the boat’s capabilities so imagine my surprise when she got up to 4 knots on a reach. This is definitely not a slug. On all points of sail she handled well and exceeded my expectations for a motor sailor.

When it was time to go home, dropping the sails is just as easy. Furl the jib and drop the main into its cradle pack and zip it up. Up board and rudders, open air to let the water ballast out, down engine, start and go. Under way the remainder of the water ballast drains and you’re off at a fast clip to home base–be that a dock, beach or trailer.

“I’ve been a traditional keel boater for 40 years but this boat gave me pause to consider other boat styles and their merits. As a compromise for motoring and sailing it is really quite elegant – Odin has it figured out.”

Note:  The ODIN 820 has a second name in Europe–Imexus 27. All future models will be called Imexus.

www.imexusyachts.com

To see if this boat is available, go to http://www.boatcan.com for listings!

By Bob Sullivan

 

Related Articles

 

 

Viko S35

By Katherine Stone

I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats on champagne fall days when many boats are either being hauled for the winter, or are already under shrink-wrap.

Not only are there great winds – usually offshore, but welcome sunshine and open waters with few boats out enjoying the last days of September. Joining me for the test sail of the Viko S35 was the former publisher of Canadian Yachting, Greg Nicoll, and the Canadian Viko Yachts representative, Eric Beauregard, who had driven down from Montreal.

Read More

 

 

Four Winns H4

 

Four Winns H4By Andy Adams

The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and the new H4 is a great example of how the design and engineering resources of Beneteau can up the game even for a brand like Four Winns that has a long and distinguished history.

The Cadillac Michigan-built H4 is a brand-new design this year and we think it's especially handsome. The vertical stem bow is all new and innovative. It is a design feature that was chosen to give Four Winns and the H4 a sense of modern and contemporary look while the stern remains more traditional. 

Read More

Destinations

  • Prev
It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul ...
Cowichan Bay is a waterfront village with a row of shops, artisan products, marine supplies and a ...
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

West Side Story

by Jennifer M. Smith, drone photos by Alex Nikolajevich

It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul out was still over a month away. The question was: where to now? Friends in Meaford often suggested we sail in for a visit. We never had because we’d always moved north-south on the east side of Georgian Bay. This year we were up for something different. This was the perfect opportunity to cruise the west side of the bay.

We made the 10 a.m. bridge out of Little Current and motor-sailed east southeast in light northerlies. We’d often sailed past Snug Harbour, a nearly land-locked anchorage on the north side of Lansdowne Channel because the chart suggested we’d never make it in there with our six-foot draft. 

Read More

Lifestyle

  • Prev
This week’s Photo of the Week comes from BC. The 99th Grey Creek Regatta was held at the Lakeview ...
Back in 2019 (I believe) your magazine used a pic of Sweet Love, a Ranger Tug 31, in a photo ...
a few shots of my wife Maggie practicing her silks routine on our 1982 C&C in the North Channel ...
Last issue, we took a look at boat names. Little did we know we would get what probably will be the ...
Boat names and puns go together like …. Well, like nothing else. Here’s a couple shared by our pal ...
Frequent Windsor racing contributor to Sailing in Canada Roger Renaud, caught this gorgeous ...
The Kingston Yacht Club (KYC) celebrated its 125th anniversary in the summer of 2021, in all the ...
A study on water levels projects an unprecedented drop of water levels on Lakes Michigan-Huron and ...
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
You’ve invested thousands and thousands of dollars into your boat so naturally, you want to find ...

DIY & How to

  • Prev
Do you have abnormal engine vibration; rubber dust around engine mounts; telltale signs of possible ...
As Thanksgiving heads our way, it tends to be the ‘last hurrah’ on many fronts:  the last long ...
As the busy season starts to wind down, many boaters turn to the maintenance that has been ...
Unlike a car that moves (and requires control) left and right (and perhaps, if you’re an ...
Our boats are now on the water after a couple of really unusual years – if we did get out it was ...
Last issue of CYOB, we discussed stay and shroud tension and how these adjustments can affect ...
I was recently reading a number of Facebook posts from sailboat owners’ groups, wondering why their ...
After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and ...
Sails are attached to the sailboat rig using several different systems. Let’s begin with mainsail. ...
I’ve always thought that where safety is concerned aboard, it should be the same whether the boat ...

Supplies and Colour Matching

by Marc Robic

After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and had many small pinholes and minor surface cracks. These pinholes are mostly caused by small air pockets that lay just below the gelcoat surface. Of course, this is exacerbated by particles such as small rocks or debris under shoes, dropped winch handles, etc.

Luckily, Catalina Yachts is still very much in business and are very helpful when owners have questions or need parts. I ordered a small quantity of original formula Catalina grey and white gelcoat for my model and year.

Read More

 

  

Marine Products

  • Prev
What happened. Where did our summer go? Well, never mind that, it’s time to start thinking about ...
Cruising boaters visiting new destinations can face challenges when the marina's shorepower system ...
Worn plastic hatch covers can detract from a boat's appearance and its functionality, especially ...
The first builder of electric boats, founded in 1893, Elco now introduces new designs of its EP-6, ...
More than 3/4 of all recreational boats (power and sail) are under 26 feet and towable.
One of the top requests in the electrification of water transport is for a jet ski that can deliver ...
Many boat toilets have dimensions similar to a five-gallon bucket—and are nearly as uncomfortable. ...
Working alongside a US-based designer and boat building company, Burlington ON-based MarsKeel ...
It’s still vacation time and that means calories don’t count. The Boat Galley Cookbook: 800 ...
Words of exasperation wafting across a marina often signal a boat owner fighting with a jammed ...

News

  • Prev
The Four Winns TH36 Catamaran had its world premiere at the Cannes Yachting Festival, September ...
After borrowing boats for a couple of years, longtime J105 fanatic and many-year organizer of the ...
Due to ongoing mechanical issues, the Kirkfield Lift Lock will remain closed for the foreseeable ...
BCI Marine is announcing that it will become Canada's distributor of OXE Marine's ...
US Team Zing’s increased boat speed and improved crew work were no match for the extraordinary crew ...
Vision Marine, founded in Montreal and currently based in Boisbriand QC, in partnership with ...
On Sunday, August 21, the Royal Canadian Yacht Club (RCYC) held its fourth annual ...
While there’s still some good weather left, let’s take a moment to celebrate this summer. Sunny, ...
Light air conditions prevented racing on Saturday, which meant there were three fleet races on ...
As bonus of my journalistic responsibilities here at CY Media, I occasionally get called upon to do ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More