Halman21250Nov2By Lloyd Hircock

One of the first boats I considered buying during my search for the perfect ""starter"" many sailing years ago was the traditional ""North Sea Double-Ender,"" a design similar to the Halman 21. To me, it possessed the quintessential qualities necessary for the perfect offshore vessel - transom-hung steering, long keel, curving sheer, an almost plumb entry, and powerfully built.

A stout and hardy vessel to be sure; the right vessel to carry me unscathed to the destination of my choice. But I didn't buy her and unfortunately I never got to sail the yacht. On a lazy August day, 15 years later, I renewed an old acquaintance and finally test-sailed such a design.

The Halman 21 is built by the Halman Manufacturing Co. in Beamsville, Ontario. Purchased by Richard Navin in 1978, the company also manufactures the famous 24-foot Shark, the Halman Niagara 26, the Bluejacket 23 Motorsailor, the Henley 20, and the Horizon 31 cutter in its 8,000-square-foot facility. The plant consists of a complete cabinetry and paint shop and enough floor space to lay-up three designs simultaneously. "We're small," says Navin, the hands-on owner, "but I believe that's good for our customers. We can service everything we manufacture - and if there are warranty problems I personally get involved for the duration."

While not exactly a household brand name, the Halman 21 has attracted a following. Either you like the traditional design or you don't &&emdash; there's no middle ground. New owner Murray Belisario purchased a Halman 21 in the spring of 1989. "It was our first sailboat," the enthusiastic owner told me. "My wife and I saw the yacht sitting outside Richard's place and bought it - that simple. I had seen the Nordica (a similar design) before, and liked the lines." And reports from owners indicate one of the benefits of owning a traditional vessel is the buoyancy of the resale market.

The boat was introduced in 1977 as the Halman 20, and its reincarnation as the Halman 21 four years ago provides an interesting perspective on the boating market. A U.S. dealer "who thought we should dress the boat up", according to Navin, placed a custom order for a 20 with a bowsprit and increased sail area to enhance sailing ability in light air. He also wanted a higher standard of finish, which included bronze port lights and halyards led back to the cockpit. Navin was tentative ("I was really reluctant to put the bowsprit on, because it might affect sailing performance") but he agreed, and the result was a revelation. The more upmarket version, dubbed the Halman 21, was an immediate success. At a time when builders were trying to woo customers by building cheaper boats, Halman scored by building a more expensive one. "The moment we sold a 21," he says, "we never sold another 20."

The one-piece hull is manufactured using 4 1/2 oz. mat bonded with polyester resin to 24 oz. woven roving and 1 1/2 oz. mat throughout. Extra 24 oz. roving is employed below the waterline. The bilge and keel area is further strengthened using unidirectional glass, stem to stern. The deck is reinforced with a core of endgrain balsa sheets.

The roomy cockpit is deep with high moulded coamings surrounding the perimeter. Wide, flat side decks make the journey to the mast and bow area easy and safe. All deck hardware is first class. Here the builder has gone all out, installing bronze ports, winches and cleats throughout. Controls lead aft and are rigged outside cockpit seating space - away from the traffic flow.

The cabin interior is appointed with teak solids and veneers. A white vinyl headliner and moulded pan serve to accentuate the darker wood tones of the strip panelling fastened to the hull walls. Head room is a modest five feet, enabling comfortable sitting. Ventilation is adequate. With six opening ports and the cabin hatch cracked a decent cross draft is achieved. One of my pet peeves is lack of sufficient ventilation. Thankfully the Halman 21 is well vented and should prove to be airy, even during those heavy sultry days.

Sleeping accommodations are understandably limited for a boat this size, but the design will serve well as a weekender. In keeping to scale a small galley has been fitted to port.

Standard equipment includes an ice box, single sink and plenty of storage space for utensils above and below the galley area. A fitted recirculating head is stationed in the V-berth. The deck-stepped single-spreader masthead rig employs twin lowers fore and aft, and a 7/8 upper.

The mainsail is large for a masthead design, but with a 2,500-pound payload perched on a 21 foot frame with a long keel, the vessel requires all the power the 220 square feet of sail can generate to maintain speed.

Unfortunately, as with the Precision 23, I picked a calm day for the test-sail. The wind was a no-show. Although the air filled in every few minutes it was a teaser with never any great velocity above 5 knots. Nevertheless we sailed smartly onto a close reach with good burst of speed.

Owner reports indicate the yacht sails well in a freshening breeze and paces well to weather. Certainly, when sailing off the wind the yacht should track exceedingly well. I found the yacht well-founded and a comfortable sailing vessel.

To contend with dead calms or uncooperative zephyrs, buyers have the option of ordering a 9-hp Yanmar IGM diesel. Historically Navin says only about two percent of customers have opted for the diesel, although in recent years that proportion has risen to about ten percent as the boat has attracted a more affluent buyer looking for a mini-motorsailer. The boat otherwise only requires a 6-hp outboard for auxiliary power, but Navin recommends a 7.5 or 8-hp model to get electric start.

The design makes trailering a snap. The long keel, modest draft and moderate beam positions it well on most single or double axle trailers with a 3,000-pound load capacity. While the Halman 21 is not everyone's cup of tea, the relative security of design and proven sailing ability, especially in a heavy seaway, will appeal to first-time sailors with small children who enjoy wandering down the asphalt highways in search of more challenging sailing venues. It will also appeal to veteran sailors desiring a strong, compact sailboat up to the challenge of stiff breezes. The price is also right, with a fairly completely equipped boat (including sails, but less engine and trailer) listed at $20,900. I probably should have bought one.

Originally published in Canadian Yachting's March/April 1991 issue.

Specifications

LOA            21 ft, 2 in.

LOD             19 ft 10 in.

Beam             7 ft 9 in.

Draft             2 ft 10 in.

Displacement             2,500 lbs.

Ballast             1,000 lbs.

Sail Area            220 sq ft.

 

 

Related Articles

CY Virtual Video Boat Tours

Virtual Boat ToursWe all love boats and nothing can break us up! So, what better way to spend our time than looking at interesting boats and going aboard in a virtual ride or tour. We have asked our friends at various dealers and manufacturers to help us assemble a one-stop online resource to experience some of the most interesting boats on the market today. Where the CY Team has done a review, we connect you to that expert viewpoint. If you can’t go boating, you can almost experience the thrill via your screen. Not quite the same, but we hope you enjoy our fine tour collection.

 

Read more about the CY Virtual Boat Tours....................

 

 

 

Neptunus 750 Enclosed FlybridgeBy Andy Adams

In the February 2020 issue of Canadian Yachting magazine, we featured our review of the Neptunus 750 Flybridge, the company’s flagship yacht. The boat had been bought by a gentleman from Newfoundland and we reviewed it just before it was to be delivered.

We learned later that the boat did not leave immediately after delivery. The story is that the new owner reconsidered the beautiful big open flying bridge layout. 

Read More

Destinations

  • Prev
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...
Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to ...
Located in Lake Huron, the internationally significant Manitoulin Island is the largest freshwater ...
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...
Ontario’s best-kept secret, the Trent-Severn Waterway National Historic site holds the key to ...
Located on the sunny south shore of the harbour, the Marina is on pilings over the water, offering ...
The approach to the Chemainus Municipal Dock from Stuart Channel is straightforward and is ...
I leaned my head back into the water and floated easily. Having spent my childhood playing in ...
History: right after gym and just before chemistry class. Fifty minutes of naming the prime ...

View of Ganges HarbourText and Photos by Marianne Scott

Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to do with locally produced food. It started thousands of years ago when the Coast Salish First Nations used the Island as a summer camp, collecting wild foods while also processing the abundant sea food for winter sustenance.

In the 19th century, five main groups settled here and began farming: Northern Europeans—some of whom had abandoned gold rush dreams; Hawaiians brought here by Vancouver Island’s second governor, James Douglas...

Read More

Lifestyle

  • Prev
Last issue we reported that Theodore Tugboat is moving up to Ontario but HelmBoy of Bedford NS sent ...
Heading to Tokyo soon, our 49erFX team of Ali ten Hove and Mariah Millen are up against it; the ...
As anyone who has been near a familiar - to them - part of the lakeshore can attest, water levels ...
As a life-long marine journalist, it has often occurred to me, that it’s a big ...
Here’s a dramatic photo of the Week from Jansin Ozkur. “Walking along the lake Ontario, noticed the ...
At the end of summer 2020, amid all the restrictions, we were able to shoot our film, Generations ...
Last issue, Mike Wheatstone, our Boat Nerd started a conversation about solar power. While many of ...
Oak Bay Marina achieves eco-certification in Clean Marine BC, which helps boating facilities to ...
OK, stop the presses. This photo just came in from Beacon Bay. Clearly those folks know how to get ...
Back in the day, the publisher of a magazine would receive a bound copy of the year’s monthly ...

National Invasive Species Awareness WeekThis week, Feb. 22-26, is National Invasive Species Awareness Week and the American Boat and Yacht Council (ABYC) released an animated video to raise awareness about the threat Aquatic Invasive Species (AIS) pose to the boating industry and what manufacturers can do to limit the spread.

AIS can damage ecosystems and negatively impact fishing and the future of the boating lifestyle. Boat access to many aquatic resources has been limited due to AIS concerns and AIS infestation can result in serious damage to boats and their components. Invasive plant life can foul propellers,

Read More

A Freedom Boat Club StafferAs a life-long marine journalist, it has often occurred to me, that it’s a big leap to lay out the cash, (especially for those with no previous boating experience), to try it out. How does someone even know that they will like boating it if they haven’t tried it? 

Well, joining a boat club, or a yacht club that has boats available for members to use, can get you started without the big financial commitment and with the support of the club’s education and resources. Try before you buy.


Read More

DIY & How to

  • Prev
An important, but often overlooked maintenance item on any type of boat is it’s steering system. ...
Insurance may not be exciting but it is important. Check at launch. We all know we need to spend ...
Before you launch: Inspect all around the hose clamps for rust and replace as necessary. Double ...
Slovenian manufacturer, Elan, has introduced the concept of regenerative electrical auxiliary power ...
There is nothing worse than your boat trailer breaking down while on the way to a great weekend. ...
When the boat is in the water, It’s easy to take for granted the parts of the boat that are under ...
The COVID-19 pandemic has created unexpected changes in our lives, impacting everything from ...
Boating boomed in 2020, with scads of first-time boat buyers chasing respite from the pandemic. Now ...
For anyone cruising on a boat that will be away from the dock for any appreciable time keeping the ...
Styles, shapes, pitch and diameter of props are widely discussed on online boating forums, YouTube ...

So You Want to be a Better BoaterBy Amy Hogue

The COVID-19 pandemic has created unexpected changes in our lives, impacting everything from boating to vacations and these trends look to continue into the future.

In summer 2020, those trends were seen in the unprecedented numbers of boaters flocking to marinas and boat launches seeking a COVID-friendly vacation on the water. While the waterways were more crowded than ever before, the boaters you were likely to encounter weren’t necessarily in the know for boating etiquette, or marine know-how.

 

Read More

 

  

ask andrew bilge pumps 1 400By Andrew McDonald

One of the items that gets taken for granted during the spring prep work is the bilge pumping system; it’s one of those on-board features that many of us assume is in working order….until something goes wrong.

Water can get into your boat in a variety of ways: a leaking shaft-seal (stuffing box), ripped or torn bellows, a leaking through-hull, a leaking tank aboard, windows, hatches and deck fittings that aren’t sealed - the list goes on. The catch-22 when considering maintenance in the pre-season, is that you may not know where a leak may start or develop until the boat is in the water and only then do you find that water is getting inside.

Read More

 

  

Marine Products

  • Prev
Flooded marine 12V deep cycle batteries need regular topping-off with distilled water to ensure ...
The YETI Tundra 65 is their most versatile cooler, just as adept at keeping your catch cold as it ...
A good night’s sleep on the boat is a great pleasure indeed and custom bedding from SeaSwag ...
When bright white light is needed on board, a compact Sea Hawk-350 LED Light Bar from Hella marine ...
First time in many years I was lucky enough to test both the GMC Canyon and the Chevrolet Colorado ...
Unlike cars and homes, boats can be difficult spaces in which to create a quality listening ...
Premium Lithium Power Anywhere, Anytime. Expion360 produces advanced premium lithium batteries for ...
We hope you enjoyed the feature story on towed water sports and wakesurf boats that was  in ...
Yamaha Motor Canada has launched an upgraded 4.2-litre V MAX SHO® outboard, offering a full 40 ...
Holidays are perfect times for daydreaming and anyone who loves boating, will love ...

News

  • Prev
The 42 XO has been optimized and designed for outboard power from the start, which equates to ...
According to the Nova Scotia Tourism website, Theodore Tugboat began his travels in 1989, created ...
On Monday, March 29th, fire broke out in a group of power boats stored on the hard and still under ...
On April 1st, 2021, Wright’s Marina joined two other small, independent facilities: Hindson Marina ...
Our new feature is CYOB’s look at boats and food – two words that are almost synonyms! That’s a lot ...
This Maritime Radio ONLINE SELF-STUDY program is a completely integrated version of Canadian Power ...
Finding the right PFD can seem like a daunting task and extends beyond finding one that fits and ...
I start off my column by saying Wow!!  What a market! I have never seen such panic buying in ...
Yanmar Holdings has entered into a collaboration with design house “fragment design”, headed by ...
From January 25 - March 31, Parks Canada is asking the public to read its Draft Management ...

invasive species video 400AIS can damage ecosystems and negatively impact fishing and the future of the boating lifestyle. Boat access to many aquatic resources has been limited due to AIS concerns and AIS infestation can result in serious damage to boats and their components. Invasive plant life can foul propellers, jam impellors and cause bilge pump failure. Mussels can attach to boats and negatively affect performance, attach to engines causing component failure, and obstruct water lines causing system failure.

Read more....

 

 

fibreglass recycling part2 400 By Jay Weaver

Interest in finding alternative uses for used fiberglass can spark creativity and innovation. For example, a partnership involving the US, Ireland, and Northern Ireland Universities called Re-wind developed some interesting civil engineering project ideas for reusing and repurposing fiberglass blades. These include using decommissioned blades in civil engineering projects as part of powerline structures or towers, or roofs for emergency or affordable housing. In Northern Ireland, Re-wind is also considering piloting them for use in pedestrian bridges along greenways.

Read More about Fiberglass recycling....

 

 

Theodore TugboatAccording to the Nova Scotia Tourism website, Theodore Tugboat began his travels in 1989, created by Cochran Entertainment, with master model maker Fred Allen, as a children's television series inspired by the Halifax Waterfront and the stories Andrew Cochran would tell his son at bedtime. The CBC television program Theodore Tugboat ran from 1993 to 2001.

A working replica of Theodore, named "Theodore Too" was built in Dayspring, Nova Scotia. Designed by Fred Allen and Marius Lengkeek, the tug was launched on April 19, 2000 at the Snyder Shipyard. After a successful tour of several North America ports, it made its home in Halifax. 

Read More