Corbin39250By Paul Howard

"I was looking for a boat that could take me safely and comfortably around the world," writes Marius Corbin, the founder of Corbin les Bateaux Inc. in 1977. At the end of an extensive search for a serious long-distance cruiser, Corbin chose a design by Robert Dufour of Dufour Yacht Design in Montreal. Dufour’s Harmonie – the prototype of the Corbin 39 – had a canoe stern, a long, shallow fin keel with a vertical, skegg-supported rudder. Corbin and Dufour agreed to modify Harmonie by adding higher topsides and a flush deck to increase the boat’s interior volume. These modifications gave birth to the Corbin 39, and shortly after in 1979 Corbin les Bateaux pulled their first boat from its mould. Corbin elected to use encapsulated ballast in his hulls – a common boat-building method, but one that can make a hull vulnerable in a serious grounding as there is no external ballast to absorb the shock of a big bump. Corbin boasts, however, that he has added eight layers of fiberglass between the ballast and the hull so that his boat will not sink if the fiberglass keel is damaged.

Overall, the laminate schedule of the Corbin (the recipe for how much glass to use in the hull) is impressive, calling for 11 layers of fiberglass mat or roving, in addition to a 16 mm Airex core. The deck is a wide and flat expanse with a non-skid gel coat surface and a 3/4 inch marine-grade mahogany core. There are no interior hull mouldings, but the plywood bulkheads are cushioned with foam core before they are glassed in. There were no changes to the construction of the hull during the production run of the aft- and centre-cockpit models. Hulls number 1 through #129 are recognizable by a small cockpit footwell, narrow side decks along the cockpit, and a low pilothouse trunk.

A fire at the Corbin factory at Chateauguay, Que. in late ’82 destroyed the Corbin’s deck moulds, and provided the impetus to redesign the aft-cockpit version to create a larger cockpit and a higher pilothouse trunk. At the same time, Corbin added a pilothouse to the initial centre-cockpit version. Both of these revised versions sported a taller rig, with the mast step moved two-and-a-half feet further forward. Other modifications included leading the forestay to the end of a three-foot bowsprit with dual anchor rollers. It appears that the repositioning of the mast step was undertaken to solve weather helm problems in the early Corbins. Everett Bastet of E.B. Spars Inc. in Hudson, Que. provided most of the masts, rigging and related gear on the Corbin boats. He says the early rig was either a 46-foot single-spreader mast, or a 51-foot double-spreader section. Subsequent versions had double-spreader 49-foot masts, yet all the Corbin sticks were deck-stepped and stayed with 5/16 in. diameter, 9 by 32 wire. It is interesting to note that the ketch rig had its main mast stepped in the same position as the mast step on the cutter rig.

Corbins were built in various shops in Chateauguay, Napierville and St. Paul de l’Ile aux Noix, Que., with the final hull (number 199) built in 1990. The majority of these boats were finished by amateur builders from one of four stages of completion: a hull and deck; hull and deck including six structural bulkheads and ballast; motor-away and sail-away. In the motor-away package, the engine and tanks were installed but the interior was otherwise empty. The most complete sail away package included engine, tanks, mast and sails, but no interior. About 15 boats were factory-finished to a high standard to serve as demo boats for boat shows. All had custom interiors, and no two were alike. The early pilothouse version had a conventional straight-shaft engine installation with either a Volkswagen Pathfinder or Westerbeke 33 hp diesel engine under the galley sink, although some Corbins were built with the Bukh 36 hp saildrive. Centre-cockpit versions, however, placed the engine in its own room under the cockpit sole. A later aft-cockpit model had a vee-drive connected to the Westerbeke or a Perkins 4-108 diesel. A mainsheet traveller is mounted on the bridge deck of the earlier boats, but the cockpit is cramped by a boom gallows and a hydraulic steering pedestal – a cosy setting for four close friends. In later aft-cockpit boats, the cockpit was widened and lengthened, and the mainsheet traveller was moved to the pilothouse roof to make more room for lounging in the cockpit. All the Corbins have enormous deck anchor lockers – perhaps the largest I have seen – with two hatches in the foredeck that will comfortably hold all the anchors, chain, hoses and shore-power cables any long-distance cruiser will desire. This excellent storage in the bow partially makes up for the Corbin’s tiny cockpit lockers. The interior of the aft-cockpit model begins under a large pilothouse. Inside is a centre-line steering console, a nav station, either a quarter berth or hanging locker to port, and settee to starboard. There are two steps down to the main salon under the flush deck, with a large galley to port and a fridge/freezer to starboard. The dinette sits in front of the fridge with a settee or pedestal chairs on the opposite side. The head and a hanging locker separate the main salon from the forward vee-berth. Headroom is generous throughout and there are fixed ports in the topsides of the hull. Eight opening deck hatches provide lots of light and ventilation in the interior. The aft-cabin model features a double berth and choice of either an aft head, or increased stowage and a work area in the engine room.

If you are a Corbin fan and are considering a custom boat, you will want to get in touch with Giles Bastien, a former employee of Marius Corbin who now owns the Corbin moulds. He has plans to build boats to order, but has no commitments to date. Bastien also has a couple of unfinished hull-and-deck kits that he intends to sell to home-builders or complete himself for owners.

As a general rule, boats that are built by amateurs fetch lower prices, although final finish is certainly the determining factor to a Corbin’s value. Incomplete hull and deck kits start at around $35,000. Rough and poorly-finished boats sell for $75,000. Factory completed vessels start at $150,000. Reg and Patricia Watts were looking for a boat to retire on that could take them anywhere on the planet without concern for structural integrity. This Mississauga, Ont. couple also wanted a boat with moderate draft that would be both comfortable to live aboard and easy to handle. In the early spring of 1995, the Watts settled on an early Corbin, Dora Rose, built in 1980. (The boat’s first owner, Rupert Cheeseman, finished this boat in a cherry wood interior to a decent standard, and took the boat from Lake Ontario to the Caribbean three times.) "When you buy a boat for a specific purpose," Watts observes, "you worry about making too many compromises, but this didn’t apply to the Corbin. In all, we are really pleased with the boat. We did worry about the two of us being able to handle a boat of this size, but we find her manageable because of her docile characteristics." Patricia Watts adds, "Dora Rose gives us confidence whatever the weather. In fact, we are dry, comfortable, and are often out sailing when others stay at the dock." Terry Forsbrey is the second owner of Stella, a later-model kit-boat that is one of the best looking and best-equipped Corbins I have seen. Before heading down to Chesapeake Bay, Forsbrey had Wiggers Custom Yachts in Bowmanville, Ont. fair the hull and paint the topsides – a job that included spraying on, then sanding back, five coats of epoxy primer before the topcoat went on. This completely removed the fibreglass roving show-through that affects some of the Corbin hulls. To be fair, however, the glass work on these boats is otherwise very good. Forsbrey recalls, "One day when I was down at Wiggers, I met with [CY columnist] Steve Killing. When I asked him about the weather helm I was experiencing, Killing made a quick sketch to extend the forward edge of my skeg by seven inches. Wiggers made the modifications and they have made a big difference to Stella’s performance." Forsbrey also added a high roach, fully battened mainsail, and removed the suggested amount of rake from the rig. With this turbo-charged set-up he won the Oshawa Clipper Race, a double-handed, 100-mile race across Lake Ontario. "These boats sail well in light airs," Foresbrey adds, "and I find I can ghost along and pass many other more performance-oriented boats. She is not sharp to windward in light winds, but get her moving and she carries her way." Marius Corbin talks proudly of the global fleet of his boats. "We get postcards from all over the world – Japan, Australia, South Africa, you name it – from owners who love the boats for their liveability and seakindly manner." What better recommendation is there for a strong and seaworthy vessel that is ready for the world’s oceans? Looking for a contact?

www.corbin39.com

Originally published in Canadian Yachting's Winter 1996 issue.

Specifications:

LOA - 38 ft 6 in.

LWL - 31 ft 11 in.

Beam - 12 ft

Draft - 5 ft 6 in.

Displacement - 22,800 lbs.

Related Articles

 

 

Viko S35

By Katherine Stone

I am lucky to have the opportunity to helm many types of boats. I am even more lucky to sail boats on champagne fall days when many boats are either being hauled for the winter, or are already under shrink-wrap.

Not only are there great winds – usually offshore, but welcome sunshine and open waters with few boats out enjoying the last days of September. Joining me for the test sail of the Viko S35 was the former publisher of Canadian Yachting, Greg Nicoll, and the Canadian Viko Yachts representative, Eric Beauregard, who had driven down from Montreal.

Read More

 

 

Four Winns H4

 

Four Winns H4By Andy Adams

The well-known Four Winns brand is now a part of the international boatbuilder Groupe Beneteau and the new H4 is a great example of how the design and engineering resources of Beneteau can up the game even for a brand like Four Winns that has a long and distinguished history.

The Cadillac Michigan-built H4 is a brand-new design this year and we think it's especially handsome. The vertical stem bow is all new and innovative. It is a design feature that was chosen to give Four Winns and the H4 a sense of modern and contemporary look while the stern remains more traditional. 

Read More

Destinations

  • Prev
It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul ...
Cowichan Bay is a waterfront village with a row of shops, artisan products, marine supplies and a ...
Instant towns have sprung up in the past, especially on the BC coast. In the late 1850s, Victoria ...
Following the War of 1812, a battle that Canada narrowly won against the United States, the ...
You’ve weathered COVID and you’re ready to book your charter to paradise. You’ve done some ...
If you are looking for an interesting destination for a weekend trip or longer, Quebec City will ...
A holiday often is defined by the experiences we make in unique and beautiful settings. But what ...
St Vincent and the Grenadines is open to tourists and Horizon Yacht Charters are looking forward to ...

West Side Story

by Jennifer M. Smith, drone photos by Alex Nikolajevich

It was the last day of August and we were in Little Current heading south. Our Lasalle winter haul out was still over a month away. The question was: where to now? Friends in Meaford often suggested we sail in for a visit. We never had because we’d always moved north-south on the east side of Georgian Bay. This year we were up for something different. This was the perfect opportunity to cruise the west side of the bay.

We made the 10 a.m. bridge out of Little Current and motor-sailed east southeast in light northerlies. We’d often sailed past Snug Harbour, a nearly land-locked anchorage on the north side of Lansdowne Channel because the chart suggested we’d never make it in there with our six-foot draft. 

Read More

Lifestyle

  • Prev
This week’s Photo of the Week comes from BC. The 99th Grey Creek Regatta was held at the Lakeview ...
Back in 2019 (I believe) your magazine used a pic of Sweet Love, a Ranger Tug 31, in a photo ...
a few shots of my wife Maggie practicing her silks routine on our 1982 C&C in the North Channel ...
Last issue, we took a look at boat names. Little did we know we would get what probably will be the ...
Boat names and puns go together like …. Well, like nothing else. Here’s a couple shared by our pal ...
Frequent Windsor racing contributor to Sailing in Canada Roger Renaud, caught this gorgeous ...
The Kingston Yacht Club (KYC) celebrated its 125th anniversary in the summer of 2021, in all the ...
A study on water levels projects an unprecedented drop of water levels on Lakes Michigan-Huron and ...
Ahoy me hearties. June is Sailpast month, so Keelly and her pal Tracey were themed out as (not ...
You’ve invested thousands and thousands of dollars into your boat so naturally, you want to find ...

DIY & How to

  • Prev
Do you have abnormal engine vibration; rubber dust around engine mounts; telltale signs of possible ...
As Thanksgiving heads our way, it tends to be the ‘last hurrah’ on many fronts:  the last long ...
As the busy season starts to wind down, many boaters turn to the maintenance that has been ...
Unlike a car that moves (and requires control) left and right (and perhaps, if you’re an ...
Our boats are now on the water after a couple of really unusual years – if we did get out it was ...
Last issue of CYOB, we discussed stay and shroud tension and how these adjustments can affect ...
I was recently reading a number of Facebook posts from sailboat owners’ groups, wondering why their ...
After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and ...
Sails are attached to the sailboat rig using several different systems. Let’s begin with mainsail. ...
I’ve always thought that where safety is concerned aboard, it should be the same whether the boat ...

Supplies and Colour Matching

by Marc Robic

After 27 years of sun and traffic, the cockpit floor on Aquaholic was starting to look faded and had many small pinholes and minor surface cracks. These pinholes are mostly caused by small air pockets that lay just below the gelcoat surface. Of course, this is exacerbated by particles such as small rocks or debris under shoes, dropped winch handles, etc.

Luckily, Catalina Yachts is still very much in business and are very helpful when owners have questions or need parts. I ordered a small quantity of original formula Catalina grey and white gelcoat for my model and year.

Read More

 

  

Marine Products

  • Prev
What happened. Where did our summer go? Well, never mind that, it’s time to start thinking about ...
Cruising boaters visiting new destinations can face challenges when the marina's shorepower system ...
Worn plastic hatch covers can detract from a boat's appearance and its functionality, especially ...
The first builder of electric boats, founded in 1893, Elco now introduces new designs of its EP-6, ...
More than 3/4 of all recreational boats (power and sail) are under 26 feet and towable.
One of the top requests in the electrification of water transport is for a jet ski that can deliver ...
Many boat toilets have dimensions similar to a five-gallon bucket—and are nearly as uncomfortable. ...
Working alongside a US-based designer and boat building company, Burlington ON-based MarsKeel ...
It’s still vacation time and that means calories don’t count. The Boat Galley Cookbook: 800 ...
Words of exasperation wafting across a marina often signal a boat owner fighting with a jammed ...

News

  • Prev
The Four Winns TH36 Catamaran had its world premiere at the Cannes Yachting Festival, September ...
After borrowing boats for a couple of years, longtime J105 fanatic and many-year organizer of the ...
Due to ongoing mechanical issues, the Kirkfield Lift Lock will remain closed for the foreseeable ...
BCI Marine is announcing that it will become Canada's distributor of OXE Marine's ...
US Team Zing’s increased boat speed and improved crew work were no match for the extraordinary crew ...
Vision Marine, founded in Montreal and currently based in Boisbriand QC, in partnership with ...
On Sunday, August 21, the Royal Canadian Yacht Club (RCYC) held its fourth annual ...
While there’s still some good weather left, let’s take a moment to celebrate this summer. Sunny, ...
Light air conditions prevented racing on Saturday, which meant there were three fleet races on ...
As bonus of my journalistic responsibilities here at CY Media, I occasionally get called upon to do ...

RS Electric BoatsSailGP, the international racing series featuring high speed F50 wingsailed catamarans, is partnering with RS Electric Boats – sister brand of sailboat manufacturer RS Sailing – to use the Pulse 63 electric RIB as chase, coach and support boats.

RS Electric Boats will supply SailGP with four Pulse 63s, which were designed to be electric boats from the outset. The unique aerodynamic hull form is designed to support the weight of the batteries while allowing rapid acceleration, functional speeds up to 23 knots and ample range.

 

 

Read More