CapeCod250BFor most sailors, the blustery onset of fall weather signals post-season sailing withdrawal, haul-out, and a generally gloomy winter outlook. For a growing group of hardy souls, however, this time of year brings new excitement. At six feet overall length and 36 pounds minimum weight, the Cape Cod Frosty is the world's smallest IYRU sanctioned one design class.Sailed in late fall, winter and early spring, this class

is gaining popularity among sailors of all ages and abilities, who are ultimately united by one common desire - to extend the sailing season.

In December 1984, Tom Leach, harbour master at Harwich, Massachusetts, designed a boat small enough to be carried through a doorway, suitable for car top (or back seat) transport, and with sufficient stability to be safe in cold waters. This was the birth of the single handed Cape Cod Frosty, a boat intended for use in protected water such as sheltered bays and harbours. Initially, Tom's creation was received by the local sailing community with laughter but after his friends witnessed the little wonder, blasting about the waters of Wychmere harbor, they all wanted one too.

By January 1987, the fleet membership totaled 275, with a class association, rules, a newsletter and an active Sunday afternoon racing schedule. This was just the beginning. Today there are over one thousand boats in 10 fleets in various eastern states, in addition to two healthy Canadian fleets - The Shark's Bay Frosty Fleet (Toronto Sailing and Canoe Club), and The Far North Frosty Association (Montreal's Pointe Claire Yacht Club). Most fleets host Sunday afternoon racing, and with a friendly rivalry brewing between the Montreal and Toronto fleets, there are two main annual regattas. Frostyfest is held in mid to late October at P.C.Y.C., and the Sharks Bay fleet runs an annual charitable event at T.S.&C.C., the Ice Bucket Benefit regatta. Proceeds are donated to the Children's Wish Foundation. The Canadian Championship regatta alternates between these two venues, and will continue to do so until another interested fleet pops up.

A tight one design class, builder/racers pride themselves on competing in boats that are 'equally slow'. Tacks are used cautiously, and it is advisable to foot as much as possible. A common racing instructions amendment eases the severity of rule infractions to a 360 degree turn, as a 720 degree penalty is certain to put a competitor hopelessly behind. All-up weight is strictly enforced to a minimum of 214 pounds. At regattas this is accomplished with a bathroom scale. Competitors weigh themselves while holding their craft.

Racing is most often carried out on small Olympic triangle courses set inside harbor confines. The small race area and consistent boat speed makes for exciting, close racing, and much more frequent passing than in other classes.

 

The simple design uses inexpensive materials, keeping the overall, fully-rigged cost to less than $400. Often, batches of 10 or more boats are constructed in a co-operative effort, which drives the costs even lower. This is a fun winter activity for sailing club members, and generates savings associated with the bulk purchase of materials such as epoxy, wood and spars. Group building is also faster than building alone, as the process can be organized into an assembly-line whereby several stations are set up, each responsible for one stage of construction. Cutting panels from templates available from the class association achieve accurate adherence to class rules. The rules also prevent competitive builder/racers from getting carried away with exotic enhancements. For example, the foils must be made of wood only - reinforcement with fiberglass cloth and jybing dagger boards are not allowed. While fiberglass kits are available in varying degrees of assembly, the wooden version is extremely easy to build using the stitch and glue method. The hull panels are normally jig-sawed from 1/4 in. water-proof sub-floor plywood and the spars are made from standard electrician's conduit (available at electrical supply stores).

Most Frosty owners express themselves with flashy hull paint jobs, vividly colored sails, and clever boat names that play on themes of ice, low temperature and being cool.

To see if this boat is available, go to http://www.boatcan.com for listings!

Related Articles

 

 

Beneteau Oceanis Yacht 54By Zuzana Prochazka

Beneteau saw an opportunity to add a little thrill to any cruising adventure, so they took the hull of the First 53 racer (introduced just last year), and with a few fashionable changes, created the Oceanis Yacht 54, the new entry-level of Beneteau’s swanky Oceanis Yacht line. The result is a performance cruiser that sails like a witch and looks like a grande dame.

Design

Roberto Biscontini is the naval architect and Lorenzo Argento created the details of the exterior and interior design. 

Read More

Destinations

  • Prev
Over the course of four days in September 1864, representatives from Prince Edward Island, Nova ...
The new owners of L’Orignal Marina offer boaters a new destination. Located in a charming ...
Commemorating 100 (+1) years of through-navigation on the Trent-Severn Waterway National Historic ...
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...
Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to ...
Located in Lake Huron, the internationally significant Manitoulin Island is the largest freshwater ...
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...

Riverest MarinaThe new owners of L’Orignal Marina offer boaters a new destination. Located in a charming francophone village in Eastern Ontario, this joined marina and restaurant venue is the ambitious initiative of long-time entrepreneur André Chabot and biologist Alexandra Quester, both residents of L’Orignal.

The purchase of the L’Orignal Marina was made official in November 2020. The new year was barely underway when all 50 available slips were already reserved. No wonder the addition of member and visitor slips is already planned for the 2022 season – the 2021 count is up to 62 power and sail already. At the moment, the Riverest Marina offers boaters a stop where they can launch their boat...

Read More

Lifestyle

  • Prev
Photograph taken on Sept 15 while drifting home after the last Wednesday evening race at Collins ...
On the afternoon of Sunday, October 3, fourteen exceptional sailors were inducted into the Canadian ...
My husband and I purchased this beauty in Gananoque two weeks ago and boated it from there across ...
Last issue we featured a story about the engagement proposal aboard Via-Mara, a 1969 Trojan 42 Aft ...
With thanks to Sail Canada, here’s a collection of photos that are Olympic quality. Clearly our ...
Wow. That was a lot of fun reading the collection of boat names that came in from all over the ...
No individual had a greater impact on the modern sport of sailing than Bruce Kirby. Known and ...
Just off The Ocean Race European Tour, Daniel is setting his sights on competing in The Ocean Race ...
After being our fearless leader and publisher since CYOB kicked off, Greg Nicoll, handed over the ...
Swim Drink Fish is spearheading the Vancouver Plastic Cleanup by installing, maintaining, and ...

DIY & How to

  • Prev
Finding the right PFD can seem like a daunting task and extends beyond finding one that fits and ...
If chartering is something you’ve been dreaming about, this series is really for you. BUT be ...
So many decisions to make when planning for haul-out. When/how to winterize? What type of ...
It’s a scary thought - whether your boat is made of wood, fiberglass, aluminum or composite – it’s ...
It’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – ...
Last summer there was tremendous interest in buying a boat to have fun in the restricted world ...
The boat buying or selling market is hot now and has been since the late spring of 2020. Sean ...
Last issue we got up with Montreal sailor Marc Robic who has accumulated a lot of tips and tricks ...
While some parts of the country are lucky enough to have year-round boating, there are plenty of ...
A Transducer is a device that is installed below the waterline that provides underwater data to a ...

Galvanic CorrosionIt’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – it’s slowly deteriorating under you. Part of this is the nature of the marine environment: Sun, moisture, waves, wind, movement and vibration all contribute to components breaking down.

But there are other factors that are much more concerning and act at a significantly faster rate that the environment can take credit for. One of these is commonly spoken of, but not terribly well understood: Corrosion. As boaters, we’re concerned with two main types of corrosion: Galvanic and Stray-Current. This edition will focus on galvanic corrosion – in two weeks, stay tuned for info on stray-current.

Read More

 

  

Marine Products

  • Prev
Dockmate®, manufacturer of advanced wireless remote controls for yachts, has announced expanded ...
PORTS Guides are The Essential Boating Companion and Look Great in Gift Wrap!    
Updated features and benefits offer next level of product excellence by integrating innovative ...
AkzoNobel Yacht Coatings has introduced a new, easier to apply topside system with two new products ...
Whether for news, weather or just to watch the game, onboard television reception is important. But ...
Kanvaslight® was specifically engineered for a long life in a salty, sun-drenched environment. The ...
Watermakers take ocean water and create perfect drinking water using reverse osmosis. A Schenker ...
If you’re headed out for a weekend afloat or on a week-long cruise you often must park your vehicle ...
Ten years ago, St. Margaret’s Bay (Halifax), Nova Scotia-based SailTimer Inc. made the first ...
Between the odor and working in confined spaces, replacing an onboard sanitation line is never a ...

News

  • Prev
According to digital news outlet www.insuaga.com, a new, full-service and modern Port Credit marina ...
The Canadian Sailing Hall of Fame and the Marine Museum of the Great Lakes at Kingston are pleased ...
Paul Tennyson adapted from the reinforced plastics business to form Canadian Sailcraft in 1963. ...
Canadian sailors Antonia and Georgia Lewin-LaFrance from Chester NS won the bronze medal at the ...
Royal Canadian Yacht Club’s Defiant completed a six-race sweep of the Cup for Canada over Zing, the ...
On September 6, Groupe Beneteau laid out its course to develop new boating experiences, new ...
Last Friday, the first ever Canada’s Celebration of Sailing honoured the season for Sailing in ...
Boating Ontario is very proud to have Transport Canada’s Office of Boating Safety jump on ...
Montreal-based Vision Marine Technologies, Inc. is headed to the Lake of the Ozarks Shootout to ...
Summer is in full swing with Canadians enjoying time outside and on the water. So, while enjoying ...

Mia and Caleb's EngagementOn July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor Yacht in Oromocto NB. (That piece was also expanded in CY magazine later in the year.)

One of our Canadian Yachting contributors, Denise Miller, had shared the article on my social media and a young man reached out and asked if she could connect him with the owners of the boat, Dave and Barb. Denise leapt into action and Dave and Barb were thrilled. They concocted a plan that the young lady, Mia, thought she was coming to model for a sales brochure for Dave to do charter tours.

Read More