Boston Whaler 11By Andy Adams

Powerboat yachtsmen and cruising sailors both use tenders. Boston Whaler is the worldwide, hands down favourite, and since Volvo seems very keen on the Canadian outboard market, I paired the 11-ft.-4-in. Boston Whaler and the Volvo 90 outboard.

It was an arranged marriage and I was delighted it worked as well as it did. In fact, the Volvo's ideal application is on the transom of a slow, heavy sailboat. It's a high-torque auxiliary not designed for a light, fast planing boat. More on that later… 

Actually Volvo simply handed a new engine over and said, " Keep it till it's run in, then do your test." Boston Whaler (actually Chuck Brown at Sea Mark Industries) dropped the Whaler off and never had a chance to retrieve it. I had the whole rig for much of last summer, and had a terrific time with it.

Where the Whaler excels is in demanding heavy-use situations. If you only use a small fishing boat for one trip yearly and could just as easily get by with a canoe, then the Whaler is pure overkill. But if you have several small children using a boat every day of the summer, or have a power cruiser or a very large sailing yacht and need a combination tender and emergency boat that just can't let you down, the Whaler is the best choice. 

“Unsinkable" says it all. The hull and interior liner are bonded to be one piece and are pressure -foam filled from bow to transom. This results in a boat that can be, as the early Whaler ads showed, cut in half and floated away. Even filled to the gunwales with water and carrying a full load, the Whaler will float and stay upright. For life-boat use that feature could be worth any price. Equally true for children's use.

Another interesting thing about Whalers is their longevity. You will seldom meet a Whaler owner that needed to replace his first Whaler except to move up. Yacht clubs, water taxis and other institutional uses are where the Whaler really pays for itself, but to capitalize on that sort of thing, each Whaler comes with a transferrable 10-year hull warranty against structural defects.

Boston Whaler 11 - Seats and PanelsThere's not the space here to list all the warranty points but you'd better believe that Boston Whaler stands behind their product. The construction techniques used are one reason they can offer that warranty but there is more than that. The boats are uncommonly light and easy to carry. 

Good design really comes into focus when you pick this little boat up. The gunwales are shaped to fit your hand and there are no sharp edges. Except at the transom the whole boat is surrounded by a perfect hand-hold. A big rubber trim-strip covers the outside edge to finish it.

Some varnished trim accents the interior and gives it a nautical look. There are side panels that hold oars or paddles (and two sets of sturdy oar locks), a wooden centre seat and two wooden hatch-covers. The remainder of the seating is fibreglass, all self-draining and equipped with good quality plugs.

In use the Whaler tracks in a solid sure-footed way, stays flat even when used as a swim platform, and is low enough in the gunwales for easy fishing. You could use the storage areas as live wells.

It should be no surprise that whaler quality doesn't come cheap. But, at $2,240 it isn't out of line after all we're not comparing it to an aluminum car topper-this is a thoroughly-engineered, carefully built boat even if it is small.

But, I called this an arranged marriage. The problem was that to give the 8.5-hp Volvo its best chance I should have had it on a sailboat. Volvo lists it as a sail motor meaning it performs best as an auxiliary. Hanging it on the back of the Whaler may not have been fair. The Whaler planes easily and moves fast. The high-torque Volvo motor just wasn’t ever intended to scoot along at 26-30 mph. The little motor ran out of prop at about 12 mph, so it was out of its element.

Pulling the cord on the Volvo is easy, and brings the engine to life on the second try almost every time. Strangely, it started best while dead cold and gave the most trouble when fully warmed up. The difficulty here could have been caused by one of the least satisfactory aspects of the design: the fuel-line coupling comprising a nipple on the engine and a female plug on the line.

Boston Whaler 11 - Volvo 90Where the Volvo differs from the practice followed by Mercury is that the engine nipple has no ball-stopper. When disconnected, the Mere coupling seals itself in both sections so there's no leaking. The Volvo line coupling seals, but the nipple on the engine does not, requiring the operator to push the hanging rubber cap over the end. This is provided by the factory, but it is a very awkward way of keeping the fuel in the engine.

The first problem is that one sometimes forgets the cover plug, leaving fuel all over the engine bilge. The next is that when you do remember, the plug will develop suction making it difficult to remove. Also, when the engine is left connected, the fuel seems to drain through the engine. This explains why it starts with a squeeze of the fuel-line ball and a bit of choke, but not with just a pull of the cord.

When was the last time you used an engine with 360° rotations for reverse? The Volvo has it, plus a regular reverse gear too. The little load prop that is supplied as standard has almost as much torque in reverse as forward anyway, but that extra boost of 360° reversing could be the difference between missing and hitting the pier. 

Gear-changing itself is simple and seems quite positive with no grunching noises or reluctance. The folding arm throttle control is similarly familiar with a very long travel in the twist grip. It is easy to get the Volvo to run at exactly the right speed.

A lift bar at the front of the engine is well-balanced for carrying the engine, but it isn't the lightest engine, nor is it compact. Volvo also has a series of four-stroke engines much more in line with the design practices of Mere and OMC. The test engine was two-stroke and, of course, required the usual 50:1 gas/oil mix.

In use the Volvo ran well and was stingy with fuel. After a whole month of regular use, and despite the fuel line hassle, there was still gas in the tank. That's a nice plus on any boat but it's particularly important if the motor is being used as a sail auxiliary where it’s going to be dragged out of a locker and told to take the boat home on a half a tank.

Knowing the whaler's ability to float full of water and the Volvo’s high-torque power, I filled the boat then planed it off with ease. No problem for boat or motor.

I mentioned earlier that a fisherman could use the storage areas as live-wells but in fact, you could fill the whole boat. Imagine the looks you'd get at the campsite with a boat full of live fish, maybe a couple of 20-lb bass swimming around in there. Actually the Whaler/Volvo combination might be a pretty good idea after all…

 

Originally published in Canadian Yachting’s May 1979 issue.

 

Specifications:

Length - 11ft 4in

Beam - 5ft

Weight - 210 lbs

Engine - Volvo 90 hp8.5

Fuel Capacity - 11 litres

 

Photo Captions:

Photo 1 - Good design comes into focus every time you operate or handle this boat.

Photo 2 - Seats and panels weather well and double as oar racks.

Photo 3 - The Volvo has 360° reverse pivot.

Related Articles

 

 

Beneteau Oceanis Yacht 54By Zuzana Prochazka

Beneteau saw an opportunity to add a little thrill to any cruising adventure, so they took the hull of the First 53 racer (introduced just last year), and with a few fashionable changes, created the Oceanis Yacht 54, the new entry-level of Beneteau’s swanky Oceanis Yacht line. The result is a performance cruiser that sails like a witch and looks like a grande dame.

Design

Roberto Biscontini is the naval architect and Lorenzo Argento created the details of the exterior and interior design. 

Read More

Destinations

  • Prev
Over the course of four days in September 1864, representatives from Prince Edward Island, Nova ...
The new owners of L’Orignal Marina offer boaters a new destination. Located in a charming ...
On Friday, April 2 at 7 pm ET on TVO and streaming anytime after that on tvo.org and the TVO ...
Salt Spring Island, the largest among the Gulf Islands, has a certain mystique—much of it having to ...
Located in Lake Huron, the internationally significant Manitoulin Island is the largest freshwater ...
In Part I, Sheryl Shard ended the story at June and the start of Hurricane Season when they were ...
You likely aren’t quite ready to travel yet, but we have our fingers crossed that we can all fly ...

Riverest MarinaThe new owners of L’Orignal Marina offer boaters a new destination. Located in a charming francophone village in Eastern Ontario, this joined marina and restaurant venue is the ambitious initiative of long-time entrepreneur André Chabot and biologist Alexandra Quester, both residents of L’Orignal.

The purchase of the L’Orignal Marina was made official in November 2020. The new year was barely underway when all 50 available slips were already reserved. No wonder the addition of member and visitor slips is already planned for the 2022 season – the 2021 count is up to 62 power and sail already. At the moment, the Riverest Marina offers boaters a stop where they can launch their boat...

Read More

Lifestyle

  • Prev
Last issue we featured a story about the engagement proposal aboard Via-Mara, a 1969 Trojan 42 Aft ...
With thanks to Sail Canada, here’s a collection of photos that are Olympic quality. Clearly our ...
Wow. That was a lot of fun reading the collection of boat names that came in from all over the ...
No individual had a greater impact on the modern sport of sailing than Bruce Kirby. Known and ...
Just off The Ocean Race European Tour, Daniel is setting his sights on competing in The Ocean Race ...
After being our fearless leader and publisher since CYOB kicked off, Greg Nicoll, handed over the ...
Swim Drink Fish is spearheading the Vancouver Plastic Cleanup by installing, maintaining, and ...
With but four weeks to go, Sarah is in Japan, staying safe while acclimatizing to the heat at ...
MJM is a different kind of boat builder, second generation family owned and operated, we design and ...
Stuart Hendrie, a pro photographer sent along this photo of the pirate ship in Jordan Ontario. Many ...

DIY & How to

  • Prev
It’s a scary thought - whether your boat is made of wood, fiberglass, aluminum or composite – it’s ...
It’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – ...
Last summer there was tremendous interest in buying a boat to have fun in the restricted world ...
The boat buying or selling market is hot now and has been since the late spring of 2020. Sean ...
Last issue we got up with Montreal sailor Marc Robic who has accumulated a lot of tips and tricks ...
While some parts of the country are lucky enough to have year-round boating, there are plenty of ...
A Transducer is a device that is installed below the waterline that provides underwater data to a ...
Spring has finally sprung! At least it has weather wise here in Montreal, so it is with great ...
For most of us, the thrill of being aboard is associated with the motion of the water, wind in our ...
An important, but often overlooked maintenance item on any type of boat is it’s steering system. ...

Galvanic CorrosionIt’s a scary thought – but whether your boat is made of wood, fiberglass, aluminum or composite – it’s slowly deteriorating under you. Part of this is the nature of the marine environment: Sun, moisture, waves, wind, movement and vibration all contribute to components breaking down.

But there are other factors that are much more concerning and act at a significantly faster rate that the environment can take credit for. One of these is commonly spoken of, but not terribly well understood: Corrosion. As boaters, we’re concerned with two main types of corrosion: Galvanic and Stray-Current. This edition will focus on galvanic corrosion – in two weeks, stay tuned for info on stray-current.

Read More

 

  

Marine Products

  • Prev
Watermakers take ocean water and create perfect drinking water using reverse osmosis. A Schenker ...
If you’re headed out for a weekend afloat or on a week-long cruise you often must park your vehicle ...
Ten years ago, St. Margaret’s Bay (Halifax), Nova Scotia-based SailTimer Inc. made the first ...
Between the odor and working in confined spaces, replacing an onboard sanitation line is never a ...
For many boat owners who have gear to tote and the occasional stretch of bumpy road to negotiate, a ...
The 2022 Sea-Doo Switch is a re-imagined pontoon that makes hitting the water more accessible than ...
On the water audiophile-quality sound is attainable with the new JBL-R3500 source unit. The latest ...
An environmentally friendly product for refinishing your teak, hemp wood finishing oil is an ...
August means cruising, entertaining and enjoying summer at its finest. And that means food and ...
A Bluetooth-enabled phone or tablet is ideal for streaming music, but it's often stowed safely away ...

News

  • Prev
Royal Canadian Yacht Club’s Defiant completed a six-race sweep of the Cup for Canada over Zing, the ...
On September 6, Groupe Beneteau laid out its course to develop new boating experiences, new ...
Last Friday, the first ever Canada’s Celebration of Sailing honoured the season for Sailing in ...
Boating Ontario is very proud to have Transport Canada’s Office of Boating Safety jump on ...
Montreal-based Vision Marine Technologies, Inc. is headed to the Lake of the Ozarks Shootout to ...
Summer is in full swing with Canadians enjoying time outside and on the water. So, while enjoying ...
On July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor ...
HanseYachts AG presents RYCK, its third motorboat brand carrying the "Made in Germany" label. The ...
“We are all proud of our athletes and coaches who have dedicated themselves to push Canadian ...
Collingwood, ON hq’d Limestone Boat Company – owner and builder of Aquasport Boats, Limestone Boats ...

Mia and Caleb's EngagementOn July 23 last year, CYOB published a piece on a beautifully restored 1967 Trojan 42 Motor Yacht in Oromocto NB. (That piece was also expanded in CY magazine later in the year.)

One of our Canadian Yachting contributors, Denise Miller, had shared the article on my social media and a young man reached out and asked if she could connect him with the owners of the boat, Dave and Barb. Denise leapt into action and Dave and Barb were thrilled. They concocted a plan that the young lady, Mia, thought she was coming to model for a sales brochure for Dave to do charter tours.

Read More