Aug 9, 2017

Inspecting PropInspecting the prop, strut, cutlass bearing and shaft anode

The moment we all dread. It’s a warm sunny day and you’re out for a cruise. Suddenly the boat shudders beneath you, pings, dings and clangs are heard and you realize that you’ve hit something submerged.

From a seamanship standpoint – there are many pieces of advice and rules to follow. To put it all succinctly: Get yourself, your crew and your vessel in a position of safety (whatever good seamanship requires), first and foremost. This should, in almost every circumstance, include taking the engine out of gear.

Once your vessel and crew are safe and secured, realization will slowly creep in that damage has been done, and that a repair bill may run high. Before panicking – let’s take a look at some common damage points, what your repair tech will look at to assess the damage, and what you can do on your own to keep your costs down.

Before taking any action when damage has occurred, you should speak with your insurance company. They may direct you to have certain work performed in certain ways (and your coverage may be dependent on following their instructions).

Dialing Prop Shaft Dialing a prop shaft

In most cases, when underwater damage occurs, the boat will need to be taken out of the water to assess damage (either trailered, or lifted by a travelift). This should be done as soon as possible after damage. Here’s a quick list of what you should be looking for:


1) Damage to the hull – including fiberglass, metal, wood, through-hull fittings, the bedding of through-hulls and hull anodes

2) Damage to the prop-shaft – some boats have a prop shaft running from the engine directly to the prop, others may have sail-drives or stern-drives. All configurations have a prop shaft that may have been damaged if an object has come in contact with the spinning propeller. Sometimes damage or bending can be seen with the naked eye, other times the shaft may have to a ‘dialed’ – meaning that a tool called a dial indicator is used to measure any bending in the shaft

3) Damage to the strut and cutlass bearing – on boats with a long shaft, a strut assists in supporting the weight of the shaft extending outward from the hull. The shaft runs through a cutlass bearing (mounted inside the strut) which absorbs heat caused by friction, as well as preventing the shaft from wobbling as it turns at high RPM. If the prop has impacted, causing the shaft to bend, the chances are high that the cutlass bearing may also be damaged, as well as the strut supporting the shaft

Props have been removed and gear lube drained to check drive and shaft condition after impact.Gear Lube Drained

4) Sail-drive and stern-drive gears: In situations where the propeller impacts an object on a vessel with a sail or stern drive, the prop shaft may be damaged or bent. Inside the drive units, the shafts are driven by a series of gears, encased in gear oil. In a situation where an impact has occurred, the gear oil should be drained into a clean pan, and inspected for evidence of metal filings which would indicate damage to the gears inside the drives. If particles are found, and the gear lube is darkened or smells burned, the drive unit should be broken down and rebuilt as necessary.

5) Engine couplers – the component that joins the engine to the propeller shaft is called the engine coupler. In a heavy impact, the shaft could be thrown so far out of true that the coupler is damaged in turn – which could also cause damage to the engine. The shaft should be removed from the coupler and both inspected/replaced if any damage is suspected

6) Speedometers and transducers should be inspected for damage and tested before relaunching. Speedometers can be blown with compressed air (causing the gauge at the helm to ‘jump) which confirms proper functionality

7) Trim Tabs – trim tabs work via hydraulics – the tabs themselves, as well as the hydraulic arms and fluid reservoirs should be visually inspected, and the entire system tested before relaunching

Andrew Macdonald8) Propellers, Skegs and Anodes – Damaged props should be removed and refurbished by a repair shop. Propellers that aren’t in balance can cause damage to shafts and engine couplers (and on a secondary note can cause poor engine performance and lack of fuel efficiency). Broken or bent skegs should be repaired and anodes replaced if cracked or lost.

It’s scary to think of underwater damage and the risks that go along with boating – understanding and being prepared are the best tools that we have for preventing damage before it occurs.

In the August 24 issue – Part 2: keels, keel bolts, dagger boards, through-hulls and protective measures: bilge pumps (electric and manual), bungs for through hulls and best practices for setting them up aboard.

Safe boating everyone!

Andrew McDonald

Ask AndrewAndrew McDonald is the owner of Lakeside Marine Services – a boat repair/maintenance firm based in Toronto. Andrew has worked in the marine industry for 12 years and is a graduate of the Georgian College ‘Mechanical Techniques - Marine Engine Mechanic’ program

 

 

 

Related Articles

Destinations

  • Prev
In the 1920s, a small cove in Canoe Bay was used as a shipping point and safe-haven for rum runners ...
Here’s an update from Caroline Swann with some news for the adventurous types who may be heading to ...
The New Glasgow marina is located about six miles up the East River of Pictou in the heart of the ...
The British Virgins took a huge hit last fall from Irma. Boats were stranded on the shore by the ...
Located about half way between Shediac and the Miramichi on New Brunswick’s Acadian Coast, the town ...
Suddenly the once forsaken city of Hamilton, Ontario is booming for at least two good reasons.
The Salty Dawg Sailing Association (SDSA) invites all sailors to join a cruising rally from the ...
Long popular with New England and St. John area boaters, Passamaquoddy Bay is too often overlooked ...
We did breakfast yesterday in the Greek port of Piraeus, just outside Athens:strong coffee, crisp ...
After much speculation Prince Harry finally popped the question to American actress and longtime ...

 Killarney

KillarneyStory and Photos by: Jennifer Harker

We’re aboard Attigouatan, a Pursuit 2260 that normally lives life as a friend’s cottage boat, running back and forth from dock to dock. This will be her longest run in four years, travelling the approximately 120 kilometres (80 miles) northwest from Parry Sound to Killarney, threading our way through the northern reaches of the stunning 30,000 Islands of Georgian Bay’s eastern shoreline.

Her name evokes an early indigenous name for Lake Huron – Spirit Lake. 

Read more about Killarney....

  

Lifestyle

  • Prev
This photo from a CPS member shows how talented boaters are. Brenda Cochrane from Kelowna BC, a ...
The first part of this blog will show that not every day is blue sky and sunshine in the Bahamas!
This beauty came our way from Reel Deal Yachts in Bahia Mar, Florida. Why not charter for the ...
This new legislation from Washington State Department of Fisheries applies to boats launched in ...
Don’t miss this brilliant photo double header
In honour of Launch Day, our POTW this time comes from Wendy Loat in Port Credit. This shot, taken ...
Our favorite, Man-O-War Cay, is home to the Albury Boat Building empire. They have been building ...
On the Easter Weekend, the Sidney North Saanich Yacht Club from Vancouver Island, had its first ...
We were finally able to get a SIM card and data plan on our phone Monday morning. We could now ...
It’s Friday afternoon at the Newport Yacht Club in Stoney Creek, and that can only mean one thing - ...

Boat Reviews

  • Prev
At the boat shows, the Ranger Tugs’ classic tugboat lines always grab the crowds, with the wives ...
Tactical Custom Boats announces the sale to a North American client of a custom Tactical 77’ – Fast ...
Bruce Elliott is an inventor. And when he sold the technology he developed to build utility poles ...
One often asks of a winning achievement or a fabulous design, could it have possibly been done ...
The latest new model from Cruisers Yachts is the Cantius 42 and this yacht made its debut in the ...
The Sabre 45 Salon Express is new for 2017, making its debut at the Fort Lauderdale International ...
Jeanneau’s newest NC model is the NC 33, and it’s an exciting and innovative inboard cruiser ...
The Four Winns H290OB combines two of the most popular new big boat trends to come up with a great ...
Commodore’s Boats is a full service shipyard with over 50 years of generational history and ...

 

Jeanneau Sun Odyssey 440

Jeanneau Sun Odyssey 440By Zuzana Prochazka

There are few things more satisfying than watching someone thumb their nose at tradition and introduce something revolutionary that kicks convention to the curb. French designer, Philippe Briand, has done just that for Jenneau’s new line of Sun Odyssey family cruisers. By starting with a clean sheet, Briand re-thought how we move about on deck and below, and the results on the Jeanneau 440 are game changing.

Jeanneau unveiled the first hull of their 440 in Annapolis with dramatic flair. On command, the plastic that sheathed half the boat...

Read more about the Jeanneau Sun Odyssey 440....

 

 

DIY & How to

  • Prev
CYOB readers often ask questions about their boats and system. For this issue, I’ve answered a ...
Modern marine engines run at very high temperatures and rely on a few methods to keep their ...
Pyrotechnic distress flares have been around for decades, while electronic strobe distress flares ...
In the early spring, just after launch, with the hustle and bustle of engine checks, antifouling, ...
All engines, including marine engines (inboards, outboards and stern drives) have many moving parts ...
Most of us don’t give a second thought to our sacrificial anodes – those curious knobs of raw metal ...
I once heard an argument at a yacht club. Two old salts, patiently itching to let go lines and ...
In this time of boat show afterglow, many boaters are counting the days until launch. 
This one-day course consists of both theory and practical demonstration sessions, is designed to ...
Water has a funny way of making its way into a boat: through through-hulls, stuffing boxes, leaks, ...