Oct 23, 2016

Art and Science of SailI must admit my bias upfront to this book review; it’s a book I devoured and read cover to cover. In the fading years of my sailing career I wish I had this fabulous resource long ago.

This book is the second iteration of the Art and Science of Sails written by a wonderful sailing journalist Michael Levitt with Tom Whidden a distinguished North Sails veteran. I took it on wanting to understand more about what drove those boats we raced and how we could squeeze one more ounce of speed.

Having sailed my entire career with a technical sailing genius, Hans Fogh, and crewed alongside another intellect, Steve Calder, only now do I appreciate all they spoke to on those long trips back to the dock after a days racing. Sure, there was more art than science back then but the art was rapidly becoming a true science.

Back in the day I felt I had to contribute more to those conversations or at the very least understand all the aspects being debated. My go to resource back then was The Theory of Wing Sections by CJ Marcharj, a dry technical approach that honestly was so technical one got lost easily.

The sport has changed dramatically and this book is a solid portrayal of the journey and change in approach, technology, vision and design. In essence it sets the record straight for many of us who were possibly too close the forest to see the real evolution and its rapid pace of change.

No longer do any of us look at just the sail or mast or rig; we need to look at the integration. In the old days one would tweak the sails all the time while today with a molded sail the test and measurement and shapes are built in up front. Perhaps sadly the artist approach might be gone but the sophistication and understanding it is what sailing is all about.

Whidden’s personal story is intriguing and it’s one all of us racing and cruising alike can relate to. Sailing was his passion and while he did not say it directly this passion contributed to his sailing and business successes.
I loved the approach, the setting of a baseline, the linkages to Hood and North and the contrasts of their inherent strengths, the working though the materials and the technical meat of the book in the transitioning from as they put it “from aerodynamics theory to practice.”

The continued references and detail is extremely well done and there is a gold mine in the matching images and drawings. It’s a heavy topic but written to engage regardless of your sailing expertise. Consideration of materials and material optimization, yarn strain, sail stress, pressure coefficients, defining mainsail shape and twist are all depicted and explained and illustrated so well that the content is not intimidating at all.

There is just a ton of information that any or all of us could use often. The ability to now truly understand the effects of too tight a trim, not enough flow (or circulation as they put it) and to have a resource that demystifies and teaches is a true jewel.

It’s often said one of the things that separate great books, especially ones that deal with topics that are technical in nature, from the pack is a style that truly engages and teaches. And from personal experience from reading this book I can say I have learned a lot.

Simply said this is a must book for your sailing library.

John Kerr

John Kerr is a the managing Partner at AD ASTRA Media publishing Canadian Yachting and its related platforms in association with Kerrwil Publications Limited. Kerr a lifelong sailor and competitive racer internationally competed with Hans Fogh and Steve Calder (mentioned in this book) winning an Olympic Bronze medal for Canada in 1984.

 

Lifestyle

  • Prev
Congratulations to everyone who sent along a wonderful Canada Day photo. Fabulous photos and what a ...
My name is Alexandrine GOVAN, mother of a 5 years old girl and I found your contact on internet. ...
John Booth, who passed away just a few weeks ago was one of the most amazingly gifted and ...
We left Vero Beach on Saturday morning with Alicia, a boat from Sweden, following close behind. The ...
At the end of last month, Canadian sailors gathered on the Palma Beach in Palma de Mallorca, Spain ...
In 2019, C-TOW celebrates its 35th anniversary of providing 24/7 “Peace of Mind Boating” for ...
West Vancouver Yacht Club reports that following an independent certification process the Georgia ...
It has been hot in the Abacos this winter. Whoever said this area was cool this time of year must ...
Unfortunately this is not a picture from a boat but was taken on the evening of February 27, 2019 ...
On March 1, Tom Ramshaw of Stoney Lake Yacht Club was honoured with the most prestigious National ...

DIY & How to

  • Prev
If you’ve spent any time in a boat yard during spring commissioning season, you won’t find it out ...
As a busy marine mechanic, I tend to have the same or similar conversations often, and they’re ...
This time of year, great deals abound. That boat with the ‘for sale’ sign looks quite attractive. ...
For less than US$2,500, Jim Leshaw, a lawyer who lives and works in Key Biscayne, Florida, ...
Each spring, I tend to notice canvas. I wish it was because it’s been immaculately maintained and ...
I’ve had two emails over the past few weeks with a count-down to launch (47 days per the last ...
Last time we looked at making proper electrical connections – the tools, supplies and methods ...
Winter is a great time to look at some of the hidden spaces on your boat – to take stock of what is ...
When a boat is in the water, the bilge will often collect water that enters the boat from weather, ...
Recently I suggested doing an off-season (winter) project with a potential client, and my ...

Valvetech Bridgewater MarinaFor many years now, we have used gasoline in our cars and trucks that contains some amount of ethanol, a form of alcohol, and just as a few drops of water combine almost instantly in your Scotch, moisture from the atmosphere can combine with the ethanol in the gasoline that is in your boat’s fuel tank.

Your motor vehicle has a sealed fuel system to control evaporative losses that are a source of air pollution. Fuel is moved into the engine under pressure and any drips that might escape, drop onto the pavement. The engine is open to the pavement below. In an inboard boat, the hull is below the engine and any drips will collect in the bilge with potentially explosive consequences. 

Read more about gasoline containing ethanol......

 

  

Boat Reviews

  • Prev
The Canadian Yachting test crew last week had the opportunity to run the Bavaria S36 HT at St ...
ILCA is seeking new builders to complement its existing network of manufacturers, the International ...
Nelson Gilbert (1854-1921) began building canoes in Brockville in the 1890s, a time when the sport ...
I have heard a lot of talk lately about trends in yacht clubs where senior membership is getting ...
To get you in the mood for cruising the Boat Show then launching in spring, here’s a boat that ...
Quite simply, the styles of boats have changed. Where in past years a buyer might have been looking ...
At the boat shows, the Ranger Tugs’ classic tugboat lines always grab the crowds, with the wives ...
Sometimes a great idea requires an encore, and French yacht builder Jeanneau got that with the ...
Tactical Custom Boats announces the sale to a North American client of a custom Tactical 77’ – Fast ...
Bruce Elliott is an inventor. And when he sold the technology he developed to build utility poles ...

Four WInns HD 180By Andy Adams

The Four Winns HD 180 is the kind of family boat I love to drive and enjoy. It’s very approachable, even for less experienced drivers and the accommodations and scale are like a comfortable family car or SUV. It all feels familiar and part of that is the Volvo Penta V6 200 SX stern drive. The engine is inboard; built into the boat and unobtrusive in use.

That is unless you shove the throttles open. Then the performance side of the Volvo Penta V6 200 appears with instant throttle response, partly a result of the variable valve timing and partly because of the direct injection system. 

Read more about the Four WInns HD 180.......

 

ILCA DinghyAustin, Texas, USA (25 April 2019) – In the wake of last month’s termination of its contract with its European builder, the International Laser Class Association (ILCA) announced today that, from 25 April 2019, all new, class-approved boats will be sold and raced under the “ILCA Dinghy” name. This change will have no impact on existing ILCA-authorized boats and equipment, which will be able to race alongside ILCA Dinghies in all class sanctioned events.


“It’s a big change for a racing class that hasn’t seen anything like this in our almost 50- year history,” said Class President Tracy Usher.

Read More about the ILCA Dinghy............

Destinations

  • Prev
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...
If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you ...
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...
Vancouver-based Big Blue Yacht Charters Worldwide owner Emma Murdoch explains that luxury crewed ...


The DocksBy Katherine Stone

Docks are well-lit and wide to accommodate dock carts.

Steeped in tradition that goes back to one of the oldest towns in Canada west of Quebec City, is Penetanguishene. This bilingual community of 9,000 is located in the middle of Huronia on the southeasterly tip of Georgian Bay in Simcoe Country, Ontario. The name is believed to have been derived from Algonquin (also believed to have come from the Wendat, Abenaki and Ojibwe tribes) meaning “place of the white rolling sands”. 

Read more about the Hindson Marina..........

 

Marine Products

  • Prev
Rancho Santa Margarita, CA - Forespar has just introduced a new smaller size version of their ...
As boaters we all have a very unique connection to the water and all the opportunities it presents. ...
Edited by the Quebec Marine Association under the direction of L'Escale Nautique (producer of the ...
Blue Guard has announced the general availability of the BG-One, a solid-state bilge pump switch, ...
With the introduction of the Ion Power Basic, a safe Lithium Ion battery formulated with Lithium, ...
Finding a car brand that you enjoy while it does what you need can be tough, as they can be ...
Yikes! No boat refrigeration? You’ve Got to be Kidding me!! But then again, true campers don’t use ...
The Walker Bay Venture 14 claims to be the world’s first luxury Explorer Sport Tender. It is ...
Mercury Marine is pleased to announce the launch of the new MerCruiser V8 6.2L 370hp Jet Ready ...
My history with the Cayenne goes back many years, as I was at the launch of the original vehicle ...