Contour30250BBy Lloyd Hircock

A few years ago, Paul Countouris solved the age-old problem of space. Specifically, space at the marina. His Dragonfly 25, with its folding amas or outriggers (see CY, Killing On Design, Jan/Feb 1991), resolved one of the major problems of multihull owners at overcrowded marinas. Following the Dragonfly's success (60 are now sailing North American waters), the designer, mould maker and yacht builder recently unveiled his newest speedster, the Contour 30. Countouris is manufacturing under the P.C. Mould Ltd. logo in an impressive 10,000-sq-ft facility in Erin, Ont. Now trading on his success with the Dragonfly 25, Countouris is building the Cole Beadon-designed Contour 30 for sailing enthusiasts who demand the same thrill of speed, coupled with a greater array of creature comforts below deck.

One of those speed enthusiasts is Toronto psychiatrist Mikhail Epelbaum. "I wanted standing headroom and a full head with shower on my next boat," said the former Dragonfly owner while we tacked his Contour 30 (hull #1) out the Eastern Gap into a mist-shrouded (summer of 1992) Lake Ontario. "Also," he added, "the yacht had to be slip-friendly, (folding amas) because life on a mooring is not always as sedate as it appears."

The Contour 30, suggests Epelbaum, is indeed just what the doctor ordered. "I single-hand a lot and one criterion was the design had to be suitable for sailing alone, because my wife has a habit of wanting to serve lunch while I'm trying to tack up a congested channel!"

Not only is the design easy to handle on all points of sail, I was pleasantly surprised how effortlessly it tacked, even in very light conditions.

I recalled past sails on both tris and cats when tacking under light conditions was a chore and if the entire procedure wasn't timed precisely ("Back the damn jib," one nervous skipper barked, as I remember), the vessel would simply round-up into irons - and there you'd sit, parked.

But there was no backing of the jib during our teat-sail onboard Caniculi, (Russian for dog days or vacation). In fact, the yacht answered the helm smartly, regardless of the manoeuvre.

The yacht uses balsa core-sandwich construction throughout and foam between layers of unidirectional glass saturated with isoptholic resins. Now on hull #8, [as of 1991] production facilities are capable of pumping out one every 380 hours, or more precisely, to be carted away on a trailer, amas folded (8 ft. 6 in.), down the asphalt canals heading for a new sailing adventure.

The centrehull underwater sections are elliptical and the hull's waterline length is 8.3 times its beam. And the ama displacement is a whopping 180 per cent. In other words, the ama will support 1.8 times the weight of the boat or, pounding through seas, it's unlikely you can bury the leeward ama, which adds an extra safety factor unique to modern multihulls.

A new rotating mast section designed by Rob Mazza, formerly of Ellis Design Associates in Oakville, Ont., and now with Hunter Marine in Florida, replaces an older design that proved inadequate during field testing. The well-stayed rig fabricated by Klacko in Oakville, Ont. features double spreaders, diamonds and running backs.

A stainless steel kicker is fixed below the gooseneck at the mast base to stop the rig from over-rotating in heavy air.

The show stopper and piece de resistance is the folding amas. Now there's nothing really magical here, folks, just sound engineering principles coupled with a relatively simple design.

A retrieving line cleated at the cockpit when hauled in forces and aft crossbeams to pivot in unison about one-inch stainless steel pin centres, enclosed by massive Teflon bearings, positioned at the crossbeam/mainhull joint.

So, why doesn't the vessel tip over when the ama is fully furled? The secret is simple, ye readers of little faith. As the ama is pulled back toward the mainhull, it is being pulled down into the water at an angle of seven degrees as well. The mainhull is lifted and the amas now provide that stability. Indeed, even with both amas secured to the hull, the vessel is safe to sail in most conditions, besides resting safely at a slip.

When the owner decides to set sail, a second line, accessible from the cockpit, is hauled in releasing the amas from their down position. Once fully extended and locked, you're ready for fun.

Below decks this nifty 30-footer is spartan but practically appointed. The economical galley, to starboard of the companionway, is complete with a sink, icebox, dry storage locker and fitted stove. When asked if he had ever made a meal underway, Epelbaum's reply was "certainly, the galley is quite accommodating and well thought out."

Up forward a spacious V-berth is reached by a starboard passageway. The six-foot two-inch headroom in the main saloon is rapidly reduced as one ventures forward. Then once in the V-berth, only three feet of the sitting headroom is offered. But as V-berths go, it's roomy.

Although the yacht designer has opted for midcabin port and starboard berths, Epelbaum suggested he and his wife prefer using a centre section, placed between the midcabin bunks, to form a large cosy double bunk. "It's great until our dog (who sleeps in the V-berth forward) wants to go outside in the middle of the night and walks all over us. "Of course, I have a simple solution to that problem: leave the forward hatch open and let Rover climb out onto the deck.

Caniculi was suitably canvassed with a fully battened mainsail, a #2 and #3 by Raudaschl. The foresail was bent onto a headsail furler located in the anchor locker. Hiding the furling drum belowdecks enhances the aesthetics of the cambered deck, producing a pleasingly uncluttered look.

During our test sail, the usual fickle late afternoon winds of a dog day in July greeted us. The running shot of Caniculi here indicates a vessel planted in the water -- not moving. Nothing is further from the truth. In fact, we were cruising a tad shy of 5.5 knots at the time of the photo.

When we finally tacked clear of the outer headland, the breeze picked up and so did Caniculi. It is most exhilarating to experience a 30-foot vessel, displacing 2,700 lbs and carrying a fully submerged daggerboard (5 ft. 9 in.) catapult out of a comatose state and accelerate almost instantly from four knots to seven knots plus in less than eight knots of breeze!

For those not accustomed to the joys of sailing fast on an even keel, the Contour 30 is impressive. While it is not my intention here, nor would it be fair to compare other yachts I have sailed to the Contour 30, I'll paraphrase a cartoon I saw many years ago that portrayed a monohull sailor kneeling in prayer beside his bed with a duffel bag at his side. The caption read, "Oh Lord, forgive me, I went sailing on a trimaran – and loved it!" (I'm certain you get the idea.)

And for the cruising gunkholer, the design of the Contour 30 offers another advantage unavailable to most monos and multihulls of the same size-the ability to beach.

The design is equipped with a kick-up rudder. With a draught less than 18 inches, shallow cruising areas, usually inaccessible to but a few designs, are now within the owner's grasp. Then if the mood strikes, beach the vessel for a leisurely lunch or stay the night.

Next from P.C. Mould, says the affable builder, "is a toy for me." A Custom Contour 30, built extremely lightweight. "I'm going to experiment and see what I can build for those maniac speed sailors." As well, Countouris is planning to build the plug and maybe a few boats called an Electra Sport. This 20-foot doublehand racer is being built for Heider Funck of Raudaschl Sails in Toronto.

So, if I've whet your appetite for more on the Contour 30, a test drive can be arranged on this sporty model by contacting the dealer network. And if you are already sold, a cheque or cash for $115,000 [as of 1996] will bring you a boat ready to sail.

Originally published in Canadian Yachting's October 1992 issue.

Specifications

LOA 30 ft.

Beam 22 ft.

Folded 11 ft.

Trailered 8 ft.

Draft (board up) 1 ft.

Draft (board down) 5 ft.

Sail Area (100%) 510 sq. ft.

Weight 2,700 lbs.

 

Lifestyle

  • Prev
With old boats every repair seems to uncover something else needing attention.  Removing the ...
We admit it, this Photo of the Week shot was just too cute to resist even though it was blatant ...
Reader Lorraine Gentleman took some liberty with our request for Photo of the Week shots from the ...
This afternoon portrait of her son enjoying a snooze in a pretty unlikely spot comes to us from ...
I've been cleaning dresser drawers for space and came across this 1979 LYRA t-shirt. This was my ...
Our Photo of the Week comes from one of our CY team members who writes “This is my son and his best ...
This boat carries the distinction as the last boat to leave the C&C Custom shop in Oakville ...
We crossed Lake Ontario from Oswego with a minimum of fuss and did a little happy dance when we ...
Our Photo of the Week comes from Mark and Lisa Harris who winter in Vancouver, Washington and spend ...
I am new to boating. Bought a 2019 Ranger Tug in April followed by taking a short boating course ...

DIY & How to

  • Prev
Since the late 19th century, a debate has raged on the relative merits of diesel fuel over ...
This bag does more than hold your anchor and rode in one tidy little pile. After you’ve anchored ...
Purchase your copy of the BRAND NEW Ports Georgian Bay 2020 Edition at the Toronto International ...
The boat was put on the hard for this winter and were going to follow along with Graham as he ...
In this part, we’ll delve deeper into the other parts of the boat found below the water line: the ...
I’ve lost count of the number of times I’ve told my children to wash their hands. I remind them ...
The new editions of PORTS Cruising Guides, from the publishers of Canadian Yachting will be ...
As the seasons change and we move from warm summer into cooler fall, many fanatic boaters ...
On the Friday before a weekend with a gorgeous forecast, I heard on the news that a boat had ...
A reader suggested we take a look at anchors. Anchoring seems simple enough. A weighted hook with a ...

Tight FitA new shrink-wrap promises more environmentally conscious

In Nov 2019, I was fortunate enough to attend the Boating Ontario conference in Niagara Falls ON. This conference is geared to members and suppliers of the marine industry particularly marina operations. One of the suppliers was Layfield Geosynthetics, offering a new shrink-wrap film called ‘Bioflex MarineShrink’. The Layfield rep that I spoke with described the new product as a more environmentally conscious option (more on what this means, below).

Read more about Shrink Wrap........................

 

  

Boat Reviews

  • Prev
With a philosophy of quality and 'doing things right Ranger Tugs launches the all new R-25 at the ...
The new Beneteau Swift Trawler 41 renews the spirit of the practical seaworthy cruiser. The ...
The Canadian Yachting test crew last week had the opportunity to run the Bavaria S36 HT at St ...

Beneteau Flyer 32By Andy Adams

Summer sun boat! The handsome new Beneteau Flyer 32 is all about entertaining and the bow area is one of the main attractions. It's a wide shape forward with a huge anchor locker and opening centre section in the railing that invites you to beach the boat and go swimming. The bow is really one giant sun bed area with armrests that fold down and head rests too, for fall-asleep comfort. 

 

 

Read more about the Beneteau Flyer 32....................

 

Dufour 460By Katherine Stone

When one does an October yacht review on the Great Lakes you can never be sure of what kind of weather you will get…. and did we ever luck out! A beautiful sunny day with a high of 31 degrees and a perfect 8-10 knot breeze with light chop made for a champagne sailing day. Lucky for me we were at Swans Yacht Sales located in the Whitby Marina on Lake Ontario, trying out the Dufour 460 Grand Large, a flag ship for the midrange Dufour boats. With an overall length of 46’5” and a hull length of 44 ‘, this boat is majestic, not only in size, but also in elegance with timeless and contemporary style. 

Read More about Dufour 460..................

Destinations

  • Prev
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...

Moorings In BrazilWith an increasing amount of interest in South America as a charter destination, The Moorings has responded with a new base in Paraty, Brazil. Surrounded by towering jungles plummeting into the waters of Baia Carioca, this charter cruising region features bays peppered with islands and world-famous beaches.

Centrally located between Rio de Janeiro and São Paulo, Paraty (pronounced “Para-chee”) holds the key to many natural wonders you can only discover by boat.

Read more about Moorings' Brazil Charters......................

 

Marine Products

  • Prev
Since the days of the astrolabe, sailors have looked to the skies to determine the weather. If only ...
Since 1984 PORTS Cruising Guides have been the cruising boater's essential companion. But now PORTS ...
Canada’s largest independent fiberglass boat builder, Campion, has launched Muskoka, The M26 is 8.4 ...
It is not often I get to drive the newer model of something I own. Most of the time the model I own ...
Good news cruisers, it’s coming in early Summer 2020 – PORTS Rideau Canal and Lower Ottawa River ...
Few things are as frustrating to a boat owner as being becalmed or running out of fuel—or both. If ...
One of the biggest complaints we hear from our readers is ‘why we don’t run more new products’. ...
Every cruiser in the region has used it for years, but now there’s a brand new edition of the ...
When you visit the Toronto Boat Show, come to the Canadian Yachting booth (#1741), trial a pair of ...
With the Davis Scrubbis Underwater Hull Cleaning Kit it's easy to rid a boat of algae, grass, and ...