boat_reiview-power-darling-largeThe air in O'Rourke's Boat Repairs on Penetang Bay is thick with white dust. A grinder churns across the fly bridge, spewing showers of tiny particles in its wake. Raw fingers of fiberglass cloth protrude from the bare hull. The rear deck plates have been removed revealing decades of grime, unfinished surfaces and the skeletal stringers.

It takes vision to see the beauty beneath it all and several sets of expert hands to restore this 28-foot Bertram to its rightfully regal place on the water.

Luxurious lines was only one vital element the owner, a seasoned sailor, was seeking when he began searching for the perfect powerboat to combine comfort with character. He needed something to handle the sometimes unpredictably wicked waves of his home waters of Georgian Bay, a vessel to comfortably accommodate guests for a full-day of cruising or for the weekend and local skilled talent to bring her back from the brink.

A Canadian boat broker began sourcing North America for a suitable boat and came up with the 1983 classic cruiser, her legendary design and traditional deep V-hull translating well to Georgian Bay from her Miami roots. Two days after spotting the Bertram and following a successful survey, Darling was on a truck heading for Larry O'Rourke's Penetanguishene shop.

O'Rourke's three decades of experience rejuvenating boats are backed by the generations of boat builders and lighthouse keepers that run in his family tree. The sense of satisfaction from a job more than well-done keeps him coming back year after year. "When you bring people down to see their boat when it's done, they don't even recognize their own boat. The smile on their faces is priceless."

O'Rourke is no stranger to Bertrams – Darling's shopmate is a 20-foot Bertram and two more wait outside in the yard. These classic beauties are popular projects. "They're desirable boats. They hold their value and they're a really good Georgian Bay boat," O'Rourke said. "To buy a comparable boat new, well, you end up with a better boat restored. There's a certain 'feel good' factor too that can't be defined by price alone. "You get the pleasure of boating on Georgian Bay in a classic boat."

That being said, it's important to embark on the project properly. "You don't put a new house on an old foundation," O'Rourke said. "We started at the basement. When we go right down to the bare hull, it's pretty hard to find surprises later on."

Bertrams boast a deservedly solid reputation. "The original fiberglass is hand laid and it's good solid glass. You start with that and put a new backbone back in and it starts to look pretty. It's a lot of fun, really, to be involved with these," he said running a practiced eye over the work in progress.

It's also good value. O'Rourke said, "Every boat is different but the cost is considerably less than if you purchased the same boat new. Two guys working full time on it will put in about 350 man-hours." He cautioned that's likely a conservative estimate so early in the process. O'Rourke ticked off numbers: $30,000 to strip, repair and rebuild; a $15,000 custom paint job. "It adds up, but to purchase that boat new would be a hundred grand easy, probably $120,000. Even with all the restoration costs it will still be way under the new price."

While many customers prefer to wait for the end result, O'Rourke maintains an open door policy and invites owners to drop in throughout the process. "I encourage customers to come in to have a better appreciation for the money they're spending."

All the old hardware and rod holder holes will be blanked out and O'Rourke's craftsmen will begin with a hull as fresh and pristine as the day it rolled out from the factory.

The work begins with an all new stringer system. "This is quality marine grade mahogany," O'Rourke said, running his hand over the rich dark wood. The wood will be covered in fiberglass so no water will ever penetrate it. "This boat will never have to have new stringers."

It's a complete transformation. Original hardware will be re-chromed; others replaced with new stainless steel. "We'll dress her up with new hardware and then custom build added features to personalize the boat."

For this project a redesign is planned. The Bertram's lower helm will be removed to create a storage locker with a chart table on top and additional galley room to open up the cabin. "It gives a lot more usable space down below," O'Rourke explained. "It's perfect as a weekender boat when foul weather keeps you below." New appliances, sink, faucet and head will also be installed.

The original white hull will be changed to a dark blue hull with a light upper deck. Gold leaf lettering will put the finishing touch on Darling's makeover.

Just up the road at Lee's Marine Service Inc. another piece of the Darling project takes shape. A large cardboard box disgorges its twisted contents, a veritable dog's breakfast of wires, suspicious sections bulging under layers of electrical tape.

Lee Bruce says much of it won't need replacing due to the elimination of the cabin helm for a fly bridge only driver's seat. Across the shop, neat rows of rods, pistons and valves are lined up beside the stripped down block.

The two engines are not a matched set. One is a 305, the other a 350. By the time Bruce is finished with a bigger bore cylinder block, both engines will be 350s.

The information is more fodder for a question to be carefully considered: repower versus restoration? Bruce weighs the pros and cons and said, "If it was me. I'd repower with new technology." He said the consistent performance of fuel injection and reliability of new equipment tips the balance for him. "Old engines are carbureted. Most new ones are fuel-injected. Do they use less fuel? It's fairly close but fuel injection runs the same each time, consistently, and it's more user-friendly."

Cost is another factor. "Everything is going to cost about the same as buying new. Everybody has different reasons for doing restoration." He estimates in the end it may be slightly cheaper, by about 20 per cent. "If you go the restoring route it's expensive as it's labour intensive," Bruce warns. But for many, character wins out over cost. "You have to love the boat, but you could buy a new boat with no character.

This is not for the faint of heart do-it-yourselfer. It takes an eight-hour day per engine just to remove it from the boat and totally disassemble it in the shop. Then the real work begins. With 25 years in the business, Bruce admits to being pretty fussy, but it pays off with dozens of repeat customers who bring him their pet projects. "I've been in business a long time and seen a lot of bad stuff. I don't want any problems [once the boat is back on the water]. I want him to have as good as new. I'll replace everything. Any part that moves will be checked, repaired or replaced. All clearances are checked to see if they're within specifications. I'll look for wear, gouges and other indicators of problems."

For this project he plans to install new starters, alternators and water pumps instead of rebuilding with what he considers inferior parts. The list lengthens as he talks about rebuilding the transmission, resealing parts, disassembling the exhaust manifold and installing new gaskets. At this point it's hard to estimate the true time and project cost since it depends on what Bruce finds. "If you want to be worry free you really need to do it all and do it all at once. Rebuilding in stages is just not economical. Spend a little more and do it right. Anything that is mechanical is eventually going to break. I use the best quality parts I can to assure there's no problems."

Bruce's best advice is, "Find a great service provider and stick with them. Then really look at the cost. Just like a house renovation it always costs more than you expect." Bruce's bottom line when considering restoration is, "You really have to love the boat to do a restoration."

To get you in the mood for cruising the Boat Show then launching in spring, here’s a boat that Editor, Andy Adams reviewed this winter.
Winter is a great time to look at some of the ...
In the April issue of Canadian Yachting magazine, ...
At the Toronto International Boat Show next week, ...
This issue, to kick off 2019, we have an ...
Following the harsh impact of Hurricanes Irma and ...

Destinations

  • Prev
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...
Vancouver-based Big Blue Yacht Charters Worldwide owner Emma Murdoch explains that luxury crewed ...
In the 1920s, a small cove in Canoe Bay was used as a shipping point and safe-haven for rum runners ...
Here’s an update from Caroline Swann with some news for the adventurous types who may be heading to ...
The New Glasgow marina is located about six miles up the East River of Pictou in the heart of the ...
The British Virgins took a huge hit last fall from Irma. Boats were stranded on the shore by the ...

Mediterranean Shakedown: A Summer Cruise in Spain

Mediterranean ShakedownBy Sheryl and Paul Shard

This summer my husband, Paul, and I bought our fourth offshore cruising boat, a new Southerly 480 built by Discovery Yachts in the UK. It’s a unique boat with a retractable variable-draft swing keel giving you the option of sailing with a deep draft of 3.1 metres when the keel is down or just less than a metre with the keel fully retracted. Southerly Yachts are great for bluewater sailing and also for gunkholing in shallow creeks and inland waterways. You can even dry them out at low tide so they are is the perfect boat for the type of exploring we like to do. Our new boat, Distant Shores III, is the third Southerly Yacht that we’ve owned over 29 years of international cruising to destinations in the Caribbean, Mediterranean, Middle East, UK, Scandinavia and South America. This boat we plan to sail to the South Pacific.

Read more about the Shards' cruise in Spain...

 

Lifestyle

  • Prev
This issue, to kick off 2019, we have an unofficial Photo of the week and this, the unofficial ...
Readers give us a bit of feedback on the 60th anniversary of the Shark 24
We are home for Christmas this year. Soon we will be heading back to Adamant 1 for another winter ...
This past October we drove to Telegraph Cove with friends and spent a day of wonder cruising the ...
We have kept our subscription to Canadian Yacht Onboard as we have traveled the South Pacific over ...
Stuart Walker a legend in competitive sailing passed away on November 12, 2018 in Annapolis. Stuart ...
“In Grenada, we had about 80 cruiser kids visit our boat...by dinghy of course! Sometimes you ...
Austin Edwards told students and parents at the Saanich School’s “Parents as Informed Partners” ...
As the sole arbiter of the Photo of the Week I, your editor, get to make the choice. This week, ...
Michele Stevens pointed us to this interesting project which recently came to fruition in Cape ...

Boat Reviews

  • Prev
To get you in the mood for cruising the Boat Show then launching in spring, here’s a boat that ...
Quite simply, the styles of boats have changed. Where in past years a buyer might have been looking ...
At the boat shows, the Ranger Tugs’ classic tugboat lines always grab the crowds, with the wives ...
Sometimes a great idea requires an encore, and French yacht builder Jeanneau got that with the ...
Tactical Custom Boats announces the sale to a North American client of a custom Tactical 77’ – Fast ...
Bruce Elliott is an inventor. And when he sold the technology he developed to build utility poles ...
One often asks of a winning achievement or a fabulous design, could it have possibly been done ...
The latest new model from Cruisers Yachts is the Cantius 42 and this yacht made its debut in the ...
The Sabre 45 Salon Express is new for 2017, making its debut at the Fort Lauderdale International ...

Beneteau Antares 27

Beneteau Antares 27By Andy Adams and John Armstrong

You have to love it when something exceeds your expectations on so many levels; the new Antares 27 from Beneteau looks to me like that sort of all-around overachiever.

This is a brand new express cruiser design. With twin Mercury 200 V6 outboards, it delivers impressive performance, a reassuring and comfortable ride, and a level of versatility that will enable this boat to be your vacation partner for all sorts of adventures.

Read more about the Antares 27...

 

 

 

 

Hanse 388

Hanse 388By Katherine Stone

The Hanse group produced their second most popular boat of all time with the Hanse 385. The trick was to build on that winning formula when they upgraded to the Hanse 388, which they have done in spades. The German build quality is first rate and true to the Hanse tradition. Leaving the hull the same with a steep stern and straight stem for an optimal long water line, they went with a slightly stiffer, heavier displacement, new deck, interior layout and window line. Hanse’s highly experienced yacht construction team, judel/vrolijk & co., have combined ease of sailing, comfort and performance into the newly designed Hanse 388.

Read More about the Hanse 388...

 

 

 

DIY & How to

  • Prev
Winter is a great time to look at some of the hidden spaces on your boat – to take stock of what is ...
When a boat is in the water, the bilge will often collect water that enters the boat from weather, ...
Recently I suggested doing an off-season (winter) project with a potential client, and my ...
A recent conversation with a fellow contractor got me thinking: With all of the information out ...
As the cold approaches, shrink-wrapping is a hot topic, and I’ve heard more than a few debates at ...
Nothing stops a vacation faster than a problem with the fresh water system – be it leaks, smells, ...
Pyrotechnic distress flares have been around for decades, while electronic strobe distress flares ...
Most of us don’t give a second thought to our sacrificial anodes – those curious knobs of raw metal ...
In this time of boat show afterglow, many boaters are counting the days until launch. 

Ask Andrew: Electrical Installations – Part 1: Electrical Connections - basics and how-to’s

Electrical InstallationsBy Andrew McDonald

Winter is a great time to look at some of the hidden spaces on your boat – to take stock of what is aboard, areas of improvement and ways to upgrade.

One of the most common jobs that I’m asked to look at are electrical installations and upgrades. Surprisingly, the majority of these types of jobs are to ‘clean up’ the wiring of years past – when electrical standards were more fluid, and jury-rigged upgrades have been added and adapted over multiple owners and contractors.

Read More about Electrical Installations Basics...

 

  

Marine Products

  • Prev
Making it’s global debut at the Toronto International Boat Show the new Mercury 5hp Propane ...
Most of us have heard of fuel additives, whether it be for gasoline or diesel. But which one to ...
While the basics of boat hull design hasn’t changed that much over the years, the same cannot be ...
Yamaha targets the Canadian big-water market with its high-torque 425 horsepower V8 XTO outboard, ...
Looking for a great Christmas gift for the Offshore sailor on your list? This being a Marblehead to ...
Sail shape is long gone. They have stained, feels thin and you see broken threads everywhere. Your ...
Stripping the antifouling paint from the bottom of a boat is physically demanding and is one of the ...
The 2019 Ultimate Sailing Calendar highlights the drama and excitement of blue-water sailing, as ...
Weather nerds and boaters of all stripes will be absorbed by Bruce Kemp’s account of the monstrous ...
Canada Rope promises that its new Night Saver Rope will illuminate at night and act as a reference ...