There are two kinds of people; those who have thrusters and those who want them!

Recently, I was having a conversation with Jon Moles from Toronto Yacht Services and he mentioned how much consumer interest there was around installing bow or stern thrusters. He added that there are often attractive deals at the winter boat shows for smart shoppers who want to save a little money and also be ready to go at the start of the season.

So, we set up a time when I could interview Jon and ask what consumers have been looking for from his perspective as the man who actually installs thruster systems. We also wanted to know what it takes to install thrusters into an existing boat.

He started off by telling me that there are 2 kinds of people; those who have thrusters and those who want them! He added that once you have thrusters you will love them even if you are skilled boater who really doesn’t need thrusters. It turns out that just knowing thrusters are there, can reduce anxiety when docking in high winds or tight quarters.

A properly installed bow thruster system should be able to rotate the boat 360° in 30 seconds. It’s easy to see how that would get you out of trouble once in a while!

Jon also cited some other important considerations. He noted that it’s much easier to bring the boat in stern first if you can control its angle with thrusters. This is especially true as slips get tighter, or boats get larger. Of course, to be able to spin your boat in the fairway and drive out forward, is far easier.

Recently, systems have come on the market that include remote control and, in some cases, the thrusters can be used to hold the boat against the dock as your crew gets off to tie up.

Jon felt that almost any boat over 25 or 28 feet can have a thruster installed. It’s not just for big boats. The main issue at the bow is getting the tube about its diameter below the surface.

We also asked what costs are typical and Jon answered that to install an Imtra SidePower system [which is the brand he installs] will run perhaps $7-$8000 for boats up to 32’ while boats from 32’ to 45’ will be $8-9,000 and $10,000 for boats 45’ or larger. Stern thrusters are generally about 70% of the cost of a bow thruster due to reduced installation costs in most cases.

When planning an installation with a customer, John explains what he calls the A,B,C scenario. It’s a matter of choosing the right size and power of thruster for the combination of both your boat and the boating conditions you anticipate being in.

“A” would be the biggest and most powerful system but it might be overkill if you do your boating in sheltered waters. “B” would be a general choice while “C” would be the least expensive, but also the least powerful. (removed the ‘A’ because if you use it there it should also be used in front of the “A” and the “C”?)

Jon also cautions that when you order thrusters from the factory on a new boat, they may be sized for price more than performance.

Consumers might also think it’s better to have the factory do the work in the first place but that’s not necessarily true. The factory does not know what your boating conditions will be, and they actually install the thruster exactly the same way as Jon’s Toronto Yacht Services team does on an aftermarket basis.

Either way, the boat has to be out of the water, cleared out and cleaned up, a special installation tool used to correctly locate the tunnel, and whether it’s a brand-new boat at the factory or your beloved old clunker, you still have to cut a hole in either side of the bow to install the fiberglass tunnel and fair it in.

Jon reassures us that in his experience, he has never seen a tunnel installation fail and in fact, it probably adds quite a bit of strength to the boat when it is installed properly.

From a performance perspective, the installation is critical. It’s not just a matter of installing the tube and trimming it to size. One of the biggest cost elements is faring it in properly and creating a kind of “eyebrow” over part of the tunnel and then a carefully rounded curve to the other part. That’s a lot of grinding and careful hand work. If you don’t do it, you can lose up to 30% of the thrusters’ effectiveness and increase the noise about 30% too.

That’s when you’re installing bow thrusters–installing a stern thruster is a bit of a different matter. If your boat is laid out in such a way that the thruster can easily be accommodated, the engine is mounted inside the boat, the thruster tunnel unit is fastened outside the boat on the transom, out of sight below your swim platform and you can go ahead quite easily.

That assumes that there are no rudder stocks or steering gear in the way, that the fuel tank is not mounted right against the inside of the transom or that the engine installation people haven’t used the transom for all the wiring panels. Also, in a boat with gas engines or in a wet area, an ignition protected, (IP) unit should be used.

Jon assures us that no two installations are the same!

These are a few questions that he thinks are important to ask if you’re planning a thruster for your boat.

Ask what their recommendations are. The most important thing is to get the thruster properly sized for both your boat and the boating conditions. As an example, when Jon and the Toronto Yacht Services crew install a thruster from Side Power, the company does a full workup on that boat.

Be a performance shopper not a price shopper. Going cheap can be a false economy.

Ask if the installation is likely to increase the value of your boat. Jon feels that installing thrusters is one of the few upgrades that increases the value of the boat by approximately the cost of the installation, but this can vary widely.

Ask about the warranty coverage. Will parts be available to refurbish that thruster several years from now? Toronto Yacht Services has had to tear out some old installations and put in newer equipment. A properly sized, good-quality thruster system should last the life of the boat.

In a future issue, we will cover new systems from companies like Yacht Controller that can integrate the main engines with bow and stern thrusters to closely equal the performance available from the latest pod drive systems.

One last thought–even if you have pod drives, remember that they’re steering the boat from the stern only. Also having a bow thruster, can make a huge difference in high winds or strong current.

Have fun shopping at the shows!

For more thruster information visit:
www.lewmar.com
www.max-power.com
www.side-power.com
www.sideshift.com
www.vetus.com
www.torontoyachtservices.com

By Andy Adams

Related Articles

Destinations

  • Prev
In the 1920s, a small cove in Canoe Bay was used as a shipping point and safe-haven for rum runners ...
Here’s an update from Caroline Swann with some news for the adventurous types who may be heading to ...
The New Glasgow marina is located about six miles up the East River of Pictou in the heart of the ...
The British Virgins took a huge hit last fall from Irma. Boats were stranded on the shore by the ...
Located about half way between Shediac and the Miramichi on New Brunswick’s Acadian Coast, the town ...
Suddenly the once forsaken city of Hamilton, Ontario is booming for at least two good reasons.
The Salty Dawg Sailing Association (SDSA) invites all sailors to join a cruising rally from the ...
Long popular with New England and St. John area boaters, Passamaquoddy Bay is too often overlooked ...
We did breakfast yesterday in the Greek port of Piraeus, just outside Athens:strong coffee, crisp ...
After much speculation Prince Harry finally popped the question to American actress and longtime ...

 Killarney

KillarneyStory and Photos by: Jennifer Harker

We’re aboard Attigouatan, a Pursuit 2260 that normally lives life as a friend’s cottage boat, running back and forth from dock to dock. This will be her longest run in four years, travelling the approximately 120 kilometres (80 miles) northwest from Parry Sound to Killarney, threading our way through the northern reaches of the stunning 30,000 Islands of Georgian Bay’s eastern shoreline.

Her name evokes an early indigenous name for Lake Huron – Spirit Lake. 

Read more about Killarney....

  

Lifestyle

  • Prev
This photo from a CPS member shows how talented boaters are. Brenda Cochrane from Kelowna BC, a ...
The first part of this blog will show that not every day is blue sky and sunshine in the Bahamas!
This beauty came our way from Reel Deal Yachts in Bahia Mar, Florida. Why not charter for the ...
This new legislation from Washington State Department of Fisheries applies to boats launched in ...
Don’t miss this brilliant photo double header
In honour of Launch Day, our POTW this time comes from Wendy Loat in Port Credit. This shot, taken ...
Our favorite, Man-O-War Cay, is home to the Albury Boat Building empire. They have been building ...
On the Easter Weekend, the Sidney North Saanich Yacht Club from Vancouver Island, had its first ...
We were finally able to get a SIM card and data plan on our phone Monday morning. We could now ...
It’s Friday afternoon at the Newport Yacht Club in Stoney Creek, and that can only mean one thing - ...

Boat Reviews

  • Prev
At the boat shows, the Ranger Tugs’ classic tugboat lines always grab the crowds, with the wives ...
Tactical Custom Boats announces the sale to a North American client of a custom Tactical 77’ – Fast ...
Bruce Elliott is an inventor. And when he sold the technology he developed to build utility poles ...
One often asks of a winning achievement or a fabulous design, could it have possibly been done ...
The latest new model from Cruisers Yachts is the Cantius 42 and this yacht made its debut in the ...
The Sabre 45 Salon Express is new for 2017, making its debut at the Fort Lauderdale International ...
Jeanneau’s newest NC model is the NC 33, and it’s an exciting and innovative inboard cruiser ...
The Four Winns H290OB combines two of the most popular new big boat trends to come up with a great ...
Commodore’s Boats is a full service shipyard with over 50 years of generational history and ...

 

Jeanneau Sun Odyssey 440

Jeanneau Sun Odyssey 440By Zuzana Prochazka

There are few things more satisfying than watching someone thumb their nose at tradition and introduce something revolutionary that kicks convention to the curb. French designer, Philippe Briand, has done just that for Jenneau’s new line of Sun Odyssey family cruisers. By starting with a clean sheet, Briand re-thought how we move about on deck and below, and the results on the Jeanneau 440 are game changing.

Jeanneau unveiled the first hull of their 440 in Annapolis with dramatic flair. On command, the plastic that sheathed half the boat...

Read more about the Jeanneau Sun Odyssey 440....

 

 

Marine Products

  • Prev
Canada Rope promises that its new Night Saver Rope will illuminate at night and act as a reference ...
Take a look as a 68-foot yacht docks itself in between two Volvo Ocean 65 sailing yachts at the ...
Industry Firsts Include Direct Injection and Integrated Electric Steering System
Verviers, Belgium, 18 May 2018 — Mercury Marine, the world leader in marine propulsion technology, ...
Again, we return to the beginning. We started this column with a look at marine navigation for ...
Ga-Oh (spirit of the winds in Algonquin) creates bags and other items from re-purposed sails.
The 2018 Northwest Boat Travel Guide just arrived. This time of the year is the perfect time for ...
We are all looking to gain a little more time these days, and technology is often the route we ...
While they are no longer a part of the CPS Flare Program, Fogh Boat Supplies and Fogh Marine, both ...
We have all had the experience of heading down below on a nice boat only to encounter an unpleasant ...