A few people winterize and store their own boat. Many of us pay the pros to do it. Spring commissioning is far more rewarding because you are preparing for a great summer with your boat. Winterizing is a tough chore because we usually keep boating until the weather turns nasty, plus you are struggling with that “down-feeling” that the boating season is over. That makes it doubly hard to dig in and do a great job of winterizing and protecting your boat for the winter.

So the boating season has finally arrived and since you have been a diligent owner, all your spring outfitting has been carefully attended to. Everything on that spring check list has been duly checked off and your guests are on their way. The coolers are filled with drinks and snacks and you’re looking forward to great day on the water. However, as experience has taught us, we are at our most vulnerable when our guard is down. Routine can lull us into a false sense of security. Now is the time to make sure you have a proper procedure for departure, one that can make the difference between fun on the water and a day of frustration, or worse.

New rules severely restrict where and how salt-water boaters can discharge sewage. Is your boat ready to comply? In May 2012 a significant environmental anniversary slipped by with little fanfare. It was the end of the promised five-year transition period before new sewage discharge regulations for small craft in salt waters, introduced in 2006-07, took full effect. From 2012 onwards all vessels in Canadian waters, fresh and salt, are covered by the same legislation regarding sewage discharge. Salt-water boaters have a bit more flexibility in pump-out options but the basic rules are now the same for fresh and salt water.

There is no end of discussion and debate about the fuel filtration needs of diesel engines. Myths and half-truths abound. So let’s set the record straight. Diesel engines are the most reliable of all internal combustion engines; they are robust and they need only two simple inputs, air and fuel. Properly maintained they will perform well for upwards of 15,000 hours before needing a re-build. By contrast, that is about three times the life of a well-maintained gasoline engine.

Even if you are on salt water and your boat can safely stay in the water year-round, are you using it regularly? Metal fittings are corroding all the time, the sun beats down on fibreglass and woodwork, and the rain and damp air all contribute to the slow but inexorable process of deterioration. When engines are used, oil and other lubricants are warmed up, spread around and parts are kept running freely. Air circulates through the interior when you are out and moving. Boats just like to be used more than they like being stored.

It was always a bit sad when we “put to bed” our power-boat at the end of the cruising season. Then, one year, our favourite mechanic suggested creating a service program at the end of this season, rather than the beginning of the next one. Price savings could be had, he explained. From then on we regarded the winterizing phase for our boat as a start of the next cruising season, not the end of the current one. What follows are some ideas to make this as easy as possible — and perhaps even less expensive.

altPutting your boat away with a clean engine room and bilge at the end of the season is extremely important.

A coating of oil, or a mixture of oil and fuel, will dry out over the winter and cake onto all of the bilge systems, fasteners and mechanical equipment that it touches. Then, over the winter, the storage wrap traps the oil fumes giving it months to permeate every part of your boat. It also makes the bilge a lot harder to clean out in the spring, but spring is a time when a clean bilge has particular value.

altWell it’s spring and time to organize most people’s least favourite spring outfitting job. Time to get the bottom painted. These days, when it comes to antifouling paints, we need to consider not just the cost to ourselves, but also the cost to the environment. With a little education, boaters can make both a green and a cost-effective decision for their antifouling paint.

First, a little history. From early days, copper in various forms, from copper sheathing to cuprous oxide in paint was the best available biocide for antifouling. Remember TBT (tributyltin).

altAhhh… The snows have melted (mostly) and spring is in the air. That means it’s time to think about commissioning and getting our boats ready for another summer on the water. Not surprisingly most of us have a bit of work to do on our boats so now is the perfect opportunity to look at cleaning up our act, so to speak.

With interest in all things environmental sweeping the globe, it’s worth thinking about how we can get our boats ready to go and do our part to keep our waters, and ourselves, healthy.
 

altWe’ve all seen it, or worse, had the experience ourselves; an older boat making a less than elegant landing due to sticky throttle cables, or stiff, balky steering. There are lots of older boats out there that get less use than they deserve due to old and uncooperative cables.

This is confirmed by the amount of discussion on various chat rooms concerning the problems associated with cables. Assuming your engine is in good working order, your steering and control cables are the next most important systems on your boat. Yet so often we see boats where these cables are poorly installed or corroded.

Destinations

  • Prev
Toronto sailor and former RCYC coach/sailing instructor Ryan May is now a US coast guard captain ...
Just before the weekly party at Shirley HeightsSunsail staffer Chris Donahue conducts our chart ...
Chartering in the Caribbean conjures up images of turquoise sea, palm fringed beaches and great ...
Since anyone who opens an independent bookstore is at least as brave as a small boat shop owner, I ...
You’re on your way east to the 1000 Islands or the Trent-Severn. By entering north of Prince ...
I have lived in Ontario my whole life but have only recently had the pleasure of visiting the City ...
My trip to the Northwest Passage started long before I boarded the flight to Kangerlussaq with ...
During the summer of 2016, my wife and I cruised through the North Channel in Lake Huron on our ...
It’s like we’ve waved a magic wand and disappeared into a picture perfect painting, our ...
The Schooner Cove Yacht Club is situated between Nanaimo and Parksville, on the east coast of ...

Cowichan Bay to Genoa Bay – Almost the Gulf Islands

Cowichan Bay to Genoa Bay – Almost the Gulf Islands

 By Catherine Dook

“So you’re going offshore to Genoa Bay,” said an old salt at coffee that morning. Genoa Bay was 15 minutes away from our homeport of Cowichan Bay and hardly counted as offshore, but it was our first destination that fall. The fog had socked us in all that morning, so John and I drank coffee and gossiped with the neighbours while waiting for the weather to lift. We’d provisioned with cans of chilli, a sack of apples, and tanks full of water. We’d tested the engine and the anchor winch. We were ready.

Read More of Cowichan Bay to Genoa Bay.....

 

 

 

Lifestyle

  • Prev
One of our most enthusiastic contributors, Rob Dunbar sent us this photo from Halifax.   ...
Checking back into the US was quick and painless. We made the call to Customs but we needed to ...
Two-hundred-year-old homes are what ghost stories are made of, and Beaconsfield Yacht Club (BYC) ...
This time our photos come from Gimli where Katie Coleman Nicoll was on the scene. She’s an ...
Recently we celebrated our country’s 150th anniversary, and in true form thousands of ...
   We left off Part 1 at the year 1914, and will here pick it back up, running through ...
This week’s POTW comes from across the pond. Who knew we had a European audience   ...
Here is our boat anchored at Hockey Stick Bay. We live in a beautiful country.     ...
Michelle Jacques of Cambridge ON share this memory of her adorable pooch. “This is Frodo. ...
  Our 150 year history began in 1867, but Canada was no stranger to watercraft prior to our ...

 By: Katherine Stone

Do you know how many boaters you run into while standing in the lift lines of Blue Mountain and the surrounding private ski clubs? Quite a few! Start some conversations on the ski lifts and you might be surprised how many avid boaters you can meet.

Many who boat say that winter sports are just there to pass the time until the ice clears and you can get your boat launched and start boating again. As a ski instructor, you tend to meet even more interesting boaters… Read more about the Reef Boat Club ....

 

 

Boat Reviews

  • Prev
Commodore’s Boats is a full service shipyard with over 50 years of generational history and ...
Cruisers Yachts debuts the all-new 42 Cantius. The sporty, luxury cruiser will make its first ...
Hull #1 ZINNIA, the all-new, twin outboard MJM 35z left Boston BoatWorks on July 5 for Newport and ...
Following a 10-year hiatus, Richmond, BC-based Crescent Custom Yachts is once again launching ...
According to the folks at Fraser Yacht Sales, you couldn't ask for more - the new Azimut Atlantis ...
During those cold, cold, sunless, dreary months of January and February, I want to remember the fun ...
The Rossiter 23 Classic Day Boatis both a logical extension of the Canadian-built Rossiter line and ...
It's rare for Canadian Yachting magazine to report on the same boat twice, but that is how ...
When French naval architect Philippe Briandand the Jeanneau design team started working on the ...
Canadian Yachting magazine readers will certainly be familiar with the Cruisers Yachts line of ...

 

Marine Products

  • Prev
With all the devastation in the eastern Caribbean a natural question to ask is ‘is our boat in that ...
During the heat of summer, many boat owners turn on their air conditioning units. Whether portable ...
A milestone has been reached. The new D13-1000 sees Volvo Penta move into the 1000hp marine leisure ...
  Still looking for the perfect slip for your boat? Look no further!    
Canadian Yachting traveled to Newport to review and sea trial the new MJM 35z.     ...
Erik Pawson Of Watertight Boatworks here in North Vancouver, BC, is really passionate about the ...
Hydro Clean Hull Wash is Canada's first automatic, mechanical hull wash system and the company has ...
For 2017 there were a total of 31 events planned and 2 were cancelled for a total of 29 events. All ...
When Terry Conrad, of Conrad Marine, offered me ride in a brand-new Sea Fox 288 Commander that he ...
EMCS Industries Ltd. has a unique antifouling system that’s quite clever and incredibly ...

By Owen Hurst

Since the initial article of this series we have looked at the iPad and its use as a marine navigation instrument. We have discussed its functionality, available apps, relevant hardware and compared it to traditional charplotters. This focus on iPad led one of our readers to an interesting question that we have yet to address.

Question: Why has the focus been solely on the use of iPads for marine navigation rather than Android devices?

Read More Going iPad or Android.....