May 23, 2019

Ask AndrewA chart showing the method to determine Amp-Hour requirements for house batteries

As a busy marine mechanic, I tend to have the same or similar conversations often, and they’re quite seasonal. After engine check-overs and start-ups, conversations often are about batteries and battery switches. They tend to be one of those things that boaters use regularly, and know what they need to know to get their boat off the dock, but without understanding the ‘Why’ or the ‘How’.


I often watch boat owners hop into their vehicle and head to a Costco (or Wal-Mart or Canadian Tire) to buy a new battery. But to make the most out of your boating experience, not just any battery will do.


There are so many options and considerations. And the words that batteries are labeled with can be a source of confusion. Lets avoid ‘Maintenance Free’ or ‘Conventional’ or ‘AGM’ for the purposes of this conversation, and focus on what the battery is doing, and what you need to do to choose the right battery for your needs.

Lets focus on two terms that are of paramount importance: ‘Cranking’ and ‘Deep Cycle’. In boat electrical lingo, these are also called ‘Starter’ and ‘House’

A Cranking (or Starting) battery, as the name says, is used to start the engine. It’s designed to deliver a very high current to the starter motor, for a few seconds at a time. A Deep Cycle (or House) battery is used to power everything else: lights, stereo, horn, GPS, Navigation, etc). It delivers lower current over a much longer period (hours), in order to run house systems on the boat.

Ask AndrewA starting battery with CCA (cold cranking amp) rating

So, how do you choose a new battery? After determining if the battery will function as a Starting battery, or a House battery the next issue is to determine the rating that is needed.


If a cranking battery is undersized, it won’t deliver enough amps to properly turn the engine. An oversized battery will cost more, without delivering any additional benefit. To determine the correct rating, compare the engine (and starter motor) CCA (Cold Cranking Amp) requirements. As an example, a 3.0L Mercruiser engine (found on many 18-20’ bowriders), requires a 375 CCA battery rating (This info is found the engine installation manual.) The battery chosen should be rated as a 375 CCA battery.

A deep cycle battery (or battery bank – multiple batteries strung together to provide more power over time) should be compared with the amperage requirements of the devices used on board (together, at once). Consider: lights, stereo, GPS, and bilge pumps. Next, consider the duration that these items will be used. Will you be at anchor for a few hours at a time? Or will you be away from dock and running appliances for a week, with a once daily recharge? So – consider the total number of Amps used, and the duration that they will be used for (calculated as Amp-Hours). Choose a Deep cycle battery, rated at the intended Amp-Hours calculated. The attached chart shows a simple way to make these calculations.

So: You have a starting battery and a house battery chosen and ready to be installed, how are they used practically?

Boats with more than one battery (more than a simple starting battery) will have a battery switch installed. In a typical set-up, Battery 1 is the Starter battery, and Battery 2 is the House battery. The battery switch allows you to select between ‘Off’, ‘Batt 1’, ‘Batt 2’ and ‘Both’.

Ask AndrewA House battery showing the Amp-Hour rating


In an ideal world, you’ll step aboard on a beautiful weekend morning, and turn the switch to ‘Batt 1’ – this allows you to engage your blower, bilge pump, and to start your engine using the Cranking/Starting battery. Once you’ve pulled away from dock, felt the wind in your hair and have anchored at the perfect location for sunbathing, fishing, and a fun-in-the-sun, the switch should be turned to ‘Batt 2’ (once the engine is off). The will allow any battery-draining activities (lights, Stereo, charging of cell phones, fridge, etc) to be powered from the House battery. This serves a dual purpose of stopping you from accidentally draining the Starter battery, preventing you from getting home!

Once you’re ready to raise anchor and head back to your mooring, the battery switch should be turned back to ‘Batt 1’ in order to start the engine.

The ‘Off’ position should always be used when leaving the boat for any length of time, and the ‘Both’ selection should be reserved for emergencies (when one battery is too low to function on it’s own). As a side note, critical electronics (like bilge pumps) should be wired directly to the batteries – so that the switch can be left ‘Off’, while still allowing the bilge pump to function.

Ask AndrewAn example of a battery selector switch

Battery and power issues can be extremely frustrating – it can mean loss of functionality, wasted summer weekends, and added expense of replacement. Using batteries and switches appropriately can cut down on frustration and lead to even greater enjoyment!

 

Andrew McDonaldAndrew McDonald is the owner of Lakeside Marine Services – a boat repair/maintenance firm based in Toronto. Andrew has worked in the marine industry for 12 years and is a graduate of the Georgian College ‘Mechanical Techniques - Marine Engine Mechanic’ program.


Questions or comments for Andrew? Email him directly via: This email address is being protected from spambots. You need JavaScript enabled to view it.

Related Articles
Safety
  • 08 October 2019
  • By Ethan

Ask Andrew – Carbon Monoxide

As the seasons change and we move from warm summer into cooler fall, many fanatic boaters (especially those with cabin space) begin to use on-board heaters to extend the boating season.

Lifestyle

  • Prev
We crossed Lake Ontario from Oswego with a minimum of fuss and did a little happy dance when we ...
Our Photo of the Week comes from Mark and Lisa Harris who winter in Vancouver, Washington and spend ...
I am new to boating. Bought a 2019 Ranger Tug in April followed by taking a short boating course ...
Arie and Maribeth sent us this photo from their honeymoon departing Killarney…I think they were in ...
This shot was taken last week by Jessica Lee, a freelance photography pro, Albacore racer and part ...
On a sunny and windless day we led Alicia and another sailboat into New York Harbour. There were ...
It was a trip 2 or 3 years ago, and all 4 boats traveled up to the Killarney area in a ...
My name is Alexandrine GOVAN, mother of a 5 years old girl and I found your contact on internet. ...
John Booth, who passed away just a few weeks ago was one of the most amazingly gifted and ...
We left Vero Beach on Saturday morning with Alicia, a boat from Sweden, following close behind. The ...

Boat Reviews

  • Prev
The Canadian Yachting test crew last week had the opportunity to run the Bavaria S36 HT at St ...
ILCA is seeking new builders to complement its existing network of manufacturers, the International ...
Nelson Gilbert (1854-1921) began building canoes in Brockville in the 1890s, a time when the sport ...
I have heard a lot of talk lately about trends in yacht clubs where senior membership is getting ...
To get you in the mood for cruising the Boat Show then launching in spring, here’s a boat that ...
Quite simply, the styles of boats have changed. Where in past years a buyer might have been looking ...
At the boat shows, the Ranger Tugs’ classic tugboat lines always grab the crowds, with the wives ...
Sometimes a great idea requires an encore, and French yacht builder Jeanneau got that with the ...
Tactical Custom Boats announces the sale to a North American client of a custom Tactical 77’ – Fast ...
Bruce Elliott is an inventor. And when he sold the technology he developed to build utility poles ...

Beneteau Oceanis 30.1The Oceanis official US debut will be at the upcoming Newport International Boat Show in September and will be featured at the United States Sailboat show in Annapolis in October.

With an overall size under 30 feet and a light displacement of less than 8,805 lbs., the Oceanis is easily trailerable without a wide load permit. If you prefer to access your sailing grounds by canals and rivers, the lifting keel and rotating mast open a world of endless possibilities. Perfect for sailing on lakes or for coastal hopping, this new Oceanis is, nevertheless, a robust category B sailing yacht, fitted for offshore sailing. The smallest of the range offers the biggest choice of programs! 

Read more about the Beneteau Oceanis 30.1............................

 

Grady White Freedom 235 Dual ConsoleBy Jill Snider

Once again, I had the pleasure of joining CY’s test guru Andy Adams on a boat review. This time, out on Georgian Bay, we put the Grady White Freedom 235 Dual Console to the test. There are so many great things to tell you about this classic beauty.

Andy
If I were required to compare Grady White’s Freedom 235 Dual Console to an animal, I would tell you that she has the character of a Labrador Retriever. Here are a few reasons why...

Read More about the Grady White Freedom 235 Dual Console......................

Destinations

  • Prev
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...
If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you ...
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...

Port Severn's Lock 45Blake Marchand


As the final link between Lake Ontario and Georgian Bay, Port Severn’s Lock 45 is the gateway to the beautiful Trent-Severn Waterway. The first and smallest lock to be constructed on the Severn portion, Lock 45 is entrenched in Canadian History and is worth the trip in itself. However, it is the waterway and its idyllic surroundings that will keep you coming back.

The canal connects Lake Ontario and Lake Huron with an eastern terminus in Trenton and a western terminus in Port Severn. Its amazing natural waterways include the Trent River, Otonabee River, The Kawartha Lakes, Lake Simcoe, Lake Couchiching and Severn River.

Read more about Vancouver...........

 

Marine Products

  • Prev
Navigating the process of yacht care and maintenance just got a whole lot easier, following the ...
I will be honest, I am generally not a big fan of Sport Utility Vehicles (SUV). My wife and I own ...
In the April 2015 edition of CY magazine, I published an article on anchors and anchoring – Staying ...
The Seabin device part of the Oak Bay Marine Group trial, has had promising results so far while ...
When I took the Mitsubishi Outlander PHEV down to Wednesday night racing, the people that came over ...
Protecting your boat from scratches and dents isn’t always easy. That’s why the Big Bumper Company ...
Rancho Santa Margarita, CA - Forespar has just introduced a new smaller size version of their ...
As boaters we all have a very unique connection to the water and all the opportunities it presents. ...
Edited by the Quebec Marine Association under the direction of L'Escale Nautique (producer of the ...
Blue Guard has announced the general availability of the BG-One, a solid-state bilge pump switch, ...