THE LOWLY ANODE IS ALMOST CERTAINLY THE MOST OVERLOOKED AND NEGLECTED COMPONENT ON MANY BOATS -AT LEAST UNTIL CORROSION STARTS EATING AWAY EXPENSIVE PARTS LIKE DRIVES, SHAFTS AND PROPS.

When it comes time to haul out this year, plan to give all your underwater gear a close inspection, measure and replace your anodes now and know you are ready for next season. In the fall, you can do this at your leisure. Understandably, we seem to be in a rush to launch again each spring and once the boat is in the water, replacing anodes is difficult to say the least!

Anodes are available in three different metals; zinc, aluminum and magnesium. These days, we try to make environmentally friendly choices. Boat owners seeking a “greener” sacrificial anode have an option that works better than the old, familiar zinc versions while costing less: aluminum anodes.

Aluminum is a far better environmental anode choice than zinc. Though zinc is a heavy metal—not particularly desirable to have in excess quantities in water—the big concern is with the percentage of cadmium that zinc anodes must contain in order to work as anodes.

Cadmium is a nasty heavy metal, with its use and disposal becoming increasingly restricted and regulated. In anodes, it’s of considerable concern to scientists studying estuarial pollution and its inevitable presence in aquatic life, especially once in the human food chain.

Fortunately, boat owners already have a safe and cost-effective alternative in aluminum anodes.

Leading commercial vessel operators have used aluminum anodes for years. Propulsion system manufacturers such as Mercury Marine standardize aluminum anodes to protect their marine engines, as well as specify them as OEM replacement parts.

So why do boaters still cling to zincs? Old habits die hard, and most people don’t pay anodes much thought, let alone understand how they work. An anode’s purpose is to protect expensive metal components from galvanic corrosion. The simple science is that when a boat is in the water, its various metal components are exposed to galvanic corrosion, though not all corrode at the same rate. Those that corrode fastest are “least noble,” while the “most noble” corrode most slowly.

This is why relatively low cost, replaceable sacrificial anodes are made from less noble metals. The inexpensive anode is sacrificed, rather than the costly propeller shaft, engine, rudder, engine cooling system, refrigeration condenser, or even the hull.

While anodes may appear to be fairly inert pieces of metal, they are actually sophisticated pieces of anti-corrosion engineering. Their complexity lies in that they are truly alloys, made to an exacting specification in order to sacrifice effectively, but at a controlled rate. Aluminum anodes, for example, contain trace amounts of indium and other components to help them perform properly.

The U.S. Navy has done very extensive work on determining the alloys, composition and, importantly, the production process to create effective sacrificial anodes. Consequently, the Navy’s MILSPEC for anodes has become “the global benchmark for shipyards and ship owners,” says John Mitchell, president of leading anode manufacturer CMP Global, headquartered in Vancouver, B.C.

Anodes that wander too far from the specifications won’t work, as various forms of surface oxidation will slow, or even halt, the sacrificial process. Be careful when inspecting your own anodes - if they don’t seem to be sacrificing, other metals may be!

Apart from having the right composition for optimal protection, water salinity will affect the rate at which the anode sacrifices, and its overall effectiveness. In salt or brackish water, the anode material will be zinc or aluminum. While aluminum is superior across a greater range of salinities than zinc, the recommendation for vessels that operate only in fresh water is magnesium.

For our readers on inland fresh-water lakes or the Great Lakes, magnesium is the right choice. If the boat is going back and forth from fresh water to salt, aluminum seems to be the only answer. Aluminum does lose its effectiveness in fresh water but will begin working again once the boat enters salt water.

To provide better fresh water protection, a supplemental magnesium anode called a ‘grouper’ can be hung over the side of the boat.”

But what about the cost of aluminum anodes, since it’s a more expensive material than zinc? The rate at which an anode sacrifices is controlled by the surface area it presents to the water, and equivalent aluminum and zinc anodes will have the same dimensions. While pound for pound aluminum costs more than zinc, an aluminum anode will weigh less than half of its zinc counterpart and should therefore cost less.

The big payoff though, is that aluminum anodes have a longer effective life. Cathodic protection specialist Paul Fleury, an ex-U.S. Navy nuclear plant technician and founder of Marine Services in Earlysville, Virginia, says that in terms of protective power, aluminum anodes have 3.5 times the energy of zinc anodes. They also have 20% better self-cleaning benefits, in his experience.

When choosing replacement anodes, ask the chandlery or marina for the Navy’s MILSPEC benchmark. The market contains many inexpensive anodes but most live up to the saying, “you get what you pay for.”
For more information contact: www.canmet.com

Photo caption: A badly corroded stern drive needing major parts replacements. This should never have gotten this far – white blemishes advancing that far indicates lack of anode protection. Don’t forget that each engine and drive manufacturer specifies internal anodes that need periodic replacement as well. Replacement anode kits for all major manufacturers are now available in aluminum

Related Articles
Maintenance
  • 26 March 2018
  • By Ethan

Time To Sink Zinc

Most of us don’t give a second thought to our sacrificial anodes – those curious knobs of raw metal found on outdrives, shafts, rudders, and other metal components that dangle under the boat.

Destinations

  • Prev
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...
Vancouver-based Big Blue Yacht Charters Worldwide owner Emma Murdoch explains that luxury crewed ...
In the 1920s, a small cove in Canoe Bay was used as a shipping point and safe-haven for rum runners ...
Here’s an update from Caroline Swann with some news for the adventurous types who may be heading to ...
The New Glasgow marina is located about six miles up the East River of Pictou in the heart of the ...
The British Virgins took a huge hit last fall from Irma. Boats were stranded on the shore by the ...
Located about half way between Shediac and the Miramichi on New Brunswick’s Acadian Coast, the town ...
Suddenly the once forsaken city of Hamilton, Ontario is booming for at least two good reasons.
The Salty Dawg Sailing Association (SDSA) invites all sailors to join a cruising rally from the ...
Long popular with New England and St. John area boaters, Passamaquoddy Bay is too often overlooked ...

CYOB Destinations: We Visit the Hilton Beach Marina

Hilton BeachBy Amelia Morris

Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population 200!), which I am lucky enough to call my cottage country, is located on the north-east coast of St. Joseph Island. The Hilton Beach Marina is one of the largest and most major ports of call in the Western North Channel. It also has a long and rich history dating back to the 1850’s.

I spoke with Marina Manager, Laura McRae and got the full scoop on what goes on in this inconspicuous but busy marina.

Read more about Hilton Beach Marina....

 

 

 

Lifestyle

  • Prev
On Thursday last week, at age 88, Bruce Kirby has been invested into the Order of Canada for his ...
The Olympic Qualification Regatta is now being held in Aarhus Denmark with unlimited entries. That ...
The demographics of sailing are changing, and more women are getting involved and are often rooted ...
Whether he’s sailing celebrities around the BVI’s or sailing an Etchell back home at his native ...
POTW input is irresistible, so this time you get a couple. And don’t forget to send your own Photo ...
After a good night’s sleep, it was a lot easier to work my way through checking into the US. I ...
This photo from a CPS member shows how talented boaters are. Brenda Cochrane from Kelowna BC, a ...
The first part of this blog will show that not every day is blue sky and sunshine in the Bahamas!
This beauty came our way from Reel Deal Yachts in Bahia Mar, Florida. Why not charter for the ...
This new legislation from Washington State Department of Fisheries applies to boats launched in ...

Boat Reviews

  • Prev
At the boat shows, the Ranger Tugs’ classic tugboat lines always grab the crowds, with the wives ...
Sometimes a great idea requires an encore, and French yacht builder Jeanneau got that with the ...
Tactical Custom Boats announces the sale to a North American client of a custom Tactical 77’ – Fast ...
Bruce Elliott is an inventor. And when he sold the technology he developed to build utility poles ...
One often asks of a winning achievement or a fabulous design, could it have possibly been done ...
The latest new model from Cruisers Yachts is the Cantius 42 and this yacht made its debut in the ...
The Sabre 45 Salon Express is new for 2017, making its debut at the Fort Lauderdale International ...
Jeanneau’s newest NC model is the NC 33, and it’s an exciting and innovative inboard cruiser ...
The Four Winns H290OB combines two of the most popular new big boat trends to come up with a great ...
Commodore’s Boats is a full service shipyard with over 50 years of generational history and ...

 

Scarab 255 Open

Scarab 255 OpenBy Andy Adams and John Armstrong

You can imagine,at the GroupeBeneteau dealer meeting in Michigan last fall where all the Four Winns, Scarab, Wellcraft, and Glastrondealers had come to see the latest new models, the docks were lined up with gleaming brand-new boats to show the dealers and media – and they certainly put on a show! But for me, the Scarab 255 Open was an immediate stand out. This is a boat that breaks new ground and brings fresh thinking and interpretation of the boating experience to a wide range of buyers.

We had a quick look around but the test drives would have to wait until the next day.

Read more about the Scarab 255 Open....

 

 

 

 

Marine Products

  • Prev
Stripping the antifouling paint from the bottom of a boat is physically demanding and is one of the ...
The 2019 Ultimate Sailing Calendar highlights the drama and excitement of blue-water sailing, as ...
Weather nerds and boaters of all stripes will be absorbed by Bruce Kemp’s account of the monstrous ...
Canada Rope promises that its new Night Saver Rope will illuminate at night and act as a reference ...
Take a look as a 68-foot yacht docks itself in between two Volvo Ocean 65 sailing yachts at the ...
Industry Firsts Include Direct Injection and Integrated Electric Steering System
Verviers, Belgium, 18 May 2018 — Mercury Marine, the world leader in marine propulsion technology, ...
Again, we return to the beginning. We started this column with a look at marine navigation for ...
Ga-Oh (spirit of the winds in Algonquin) creates bags and other items from re-purposed sails.
The 2018 Northwest Boat Travel Guide just arrived. This time of the year is the perfect time for ...