Noise250A quiet boat is a good boat. “Quiet” says well engineered, solidly built, comfortable to ride in…new. New boats are quiet. Old ones are noisy – power or sail. Why is that? In a recent technical presentation, we learned that the life expectancy of the sound absorbing materials in most new boats is about 10 years.

It turns out that the material breaks down, packs down and generally looses effectiveness as the years go by through moisture absorption and other deterioration.

Making matters worse, the many sources of vibration and impact that every boat suffers when underway, will loosen almost any bolt or fastening eventually. Things start to rattle and squeak and with the diminished effectiveness of your sound insulation materials, the boat gets louder and louder every year.

Now the good news: you can fix much of this yourself over this winter.

Assuming your boat is accessible, the winter is a great time to renew that solid, new feeling. Sound insulation materials are relatively inexpensive and they are readily available too. Your dealer probably has exactly what you need in their parts inventory. Otherwise your friendly marine chandlery will almost certainly have a selection of materials and related supplies.

DO NOT use any material that is not a proper certified marine grade material for use in the application you are planning. Fire and water resistance are critical. Buy the right stuff or hire your dealer or boat yard to do the work. Engine rooms can be noisy, hot and there is a potential for fire.

Start by assessing the existing material and noting where and how it is fastened in.

Because every engine has a different sound signature, we assume the builder did their research and used the best material for that sound signature. Do your best to duplicate the material. Don’t overdo it though. Going too thick is a waste and can make clearances too tight.

There are two types of sound sources:

Structure Borne Noise

Structure borne noise is mechanical vibration in a structure that can become an audible sound, like flexing of a tank side, loose parts rattling and so on.

Airborne Noise

Airborne noise is sound waves being carried by the atmosphere, like engine noise, turbo whine, water-makers and so on.

To control airborne noise, you use materials that block or absorb noise transmission while with structure borne noise, use isolation and damping.

Incidentally, the mounts for your engines and onboard mechanical devices should be maintained regularly to help isolate and damp vibrations. Engine mounts seem to be the last thing that ever gets tightened or adjusted on older boats and they can cause or solve many vibration problems.

Reflected noise can actually make an environment louder. So, if you can abate noise at the source you treat smaller areas and eliminate secondary effects.

Also, loosening a simple little engine room access plate or cover can open up a noise path. If you can see it, you can hear it. So, if your boat has had a hole or opening made in a bulkhead for new wiring or plumbing, you need to get advice on how to properly seal that noise source off.

You need to leave room for treatment when you add a mechanical device like an air conditioner or generator too. People often retrofit equipment into older boats but neglect to add appropriate sound control material.

There are three main methods to reduce sound:

Absorbers

Sound absorption will reduce the reflected sound inside an enclosure or room. When the sound waves strike a sound absorbing material, the sound wave has an energy conversion of kinetic energy to heat. Typically, sound absorbers are porous materials such as open cell foams or fibers.

By placing a face on the porous materials, (like the silver foil in the photo above) the absorption characteristics of the system will change. In addition, some absorber materials have a barrier hung in the matrix for added effectiveness.

I suspect that most people think of foam or fiber type engine room sound absorber as being “the” noise control material but there are other types to consider.

SMALL PHOTO: Absorbers – CAP: The first square is a small sample of absorber for use in engine areas. The white square is absorber to line areas in the hull reducing reverberation.

SMALL PHOTO: Headliner – CAP: These are also absorbers; the dark square is applied behind finish work while the white square is headliner for ceilings.

Barriers

Barriers work on the principle of blocking noise from passing through. The phenomenon of blocking noise is called sound transmission loss [TL] and this is normally reported in decibels [dB]. A common reference would be a noise reduction from the noise source side of the barrier (like the engine room) to the opposite side of the barrier, (such as the salon). Typically, barriers are air impervious solids. Another common characteristic of barriers is that they are flexible and relatively heavy.

SMALL PHOTO: Underlay – CAP: The thin square is barrier for blocking engine room noise while the dark square is firm foam with a barrier top used as flooring underlay.

Damping

The third principle in noise control is vibration damping. Vibrating surfaces act like a large speaker cone. They displace air which creates noise. To convert this vibration kinetic energy into heat, damping material is applied to the vibrating surfaces. The damping material is typically visco-elastic. Visco-elastic materials have the property of having a high loss modulus also known as loss factor. The higher the loss factor, the more efficient it will be in converting the vibration kinetic energy into heat. Apply damping material to the flat sides of water or fuel tanks, or to the prop wash area of the hull.

When considering adding or replacing noise control materials on your boat, remember that structure borne noise will travel along all rigid hard connections until it finds a sympathetic surface to radiate sound. So, introduce isolation barriers where practical, on bulkheads, tank surfaces and so on.

Then, airborne noise will follow any air path until it reflects off a hard surface, so make sure air paths are either sealed or take “tortuous” routes where the airborne vibration must make turns. Line as much surface area as possible with sound absorbers or absorber/barrier composites.

When in doubt, get professional advice and remember – silence is golden!

Boat Reviews

  • Prev
New at the end of 2019, the 58 Salon Express design features large windows to flood the living ...
No wonder this is one of Regal’s best-selling boats; the Regal 33 Express offers amazing ...
The newest member of Beneteau’s Gran Turismo line is the GT 36 and this yacht brings the style and ...
With a philosophy of quality and 'doing things right Ranger Tugs launches the all new R-25 at the ...
The new Beneteau Swift Trawler 41 renews the spirit of the practical seaworthy cruiser. The ...
The Canadian Yachting test crew last week had the opportunity to run the Bavaria S36 HT at St ...

CY Virtual Video Boat Tours

Virtual Boat ToursWe all love boats and nothing can break us up! So, what better way to spend our time than looking at interesting boats and going aboard in a virtual ride or tour. We have asked our friends at various dealers and manufacturers to help us assemble a one-stop online resource to experience some of the most interesting boats on the market today. Where the CY Team has done a review, we connect you to that expert viewpoint. Our Virtual Show will continue to grow so visit frequently and check it out. If you can’t go boating, you can almost experience the thrill via your screen. Not quite the same, but we hope you enjoy our fine tour collection.

 

Read more about the CY Virtual Boat Tours....................

 

Beneteau Oceanis 30.1As boat builders clamber to create ever-bigger platforms for ever-more generous budgets, the entry-level cruiser has become an elusive animal. Sure, if you want to daysail, there are plenty of small open boats from which to choose, but if you want a freshly built pocket cruiser, you’re in for a long search. Enter French builder Groupe Beneteau, which identified this gap in the market and set about creating the Oceanis 30.1, an adorable little cruiser that resembles her larger siblings in all but length and price. With all she offers, it wouldn’t be a stretch to call her a mini yacht.

Read More about the Beneteau Oceanis 30.1..................

Destinations

  • Prev
On May 19, the New York State Canal Corporation today announced an updated opening schedule for the ...
If you have four hours to enjoy a fine tour of one of Canada’s most interesting waterways (let’s ...
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...

DolphinsBy the Canadian Yachting Editors


Canadians are blessed in many ways and especially when it comes to boating. We enjoy some the world’s most beautiful cruising waters and many places are as sheltered as they are scenic.

British Columbia and the Pacific North West plainly have the most breath-taking scenery with the combination of the majestic ocean views and the snow-capped mountains in the distance. It’s like no place on earth when you have a Killer Whale breach beside your little fishing boat.

Read more about Canadian Cruising...........

 

Lifestyle

  • Prev
The Council of British Columbia Yacht Clubs with over 50 yacht club members has become the voice of ...
Classic boat restoration expert and wooden boat builder Stan Hunter recently sent us this great ...
In Mid June, a floatplane plunged into Constance Bay on the Ottawa River after two planes collide ...
Winter is a fun time for sailmakers in Canada. We grind through mountains of repairs and have an ...
The seasoned sailor mapped out an ambitious course around the world — aboard his 28-foot ...
Clean wake: A concept amongst cruising sailors that stresses the impact that individual behaviour ...
This line-up of Beneteaus can to us from our friends at RCR Yachts in NY State where they are ...
As another harsh Victoria winter came to a close, the deck repair and refinishing continued with ...
The Peterborough Canoe Company was formed in 1892 and began production the following year after ...
On one of the sunny days we had recently, Kyle MacTaggart in Honey Harbour ON fired up the Merc to ...

Cobourg Yacht Club - 2015 Sailing instructorsKatherine Stone

Like many other harbours on Lake Ontario, Cobourg has seen its fair share of changes. Screams used to be heard from kids piled into a toboggan on wheels that went hurtling down a wooden slide into the harbour. Above it all was the bustling din from the waterfront of ship’s whistles, train engines, foghorns and thundering coal cars. It is now a rather serene place for the locals and visitors to enjoy various watercraft. Fortunately, the beautiful beach that lines the waterfront is still a star attraction for the town.

Located 95 kilometres east of Toronto and 62 kilometres east of Oshawa on the north edge of Lake Ontario, United Empire Loyalists first starting arriving in the area as early as the 1780s. The first settlement in 1798 was called Buckville, later renamed Amherst, then called Hamilton (after the township) and also nicknamed Hardscrabble. It wasn’t until 1819 that they finally settled on the name of Cobourg, which was incorporated as a town in 1837. In the late 1820s large schooners with passengers and cargo had to anchor well off shore, as there was only a landing wharf. A group of Toronto businessmen formed the Cobourg Harbour Company which built the wooden Eastern Pier from tolls charged for the use of the harbour.

Read more: Cobourg Yacht Club...

Marine Products

  • Prev
Wet decking can compromise passenger safety on boats, particularly when boarding or disembarking. ...
Anyone who has repeatedly used a rag to clean gelcoat, paint and delicate surfaces has seen the ...
The new Mercury Racing 300hp Five‑Blade CNC Cleaver propellers are designed expressly to maximize ...
Beneteau may have outdone itself with introduction of its new Gran Turismo 36, manufactured in ...
Yanmar Power Technology has announced the development of a hydrogen fuel cell system for maritime ...
Kevin Monahan is a retired Canadian Coast Guard officer with more than 20 years of experience ...
The new 2020 PORTS Georgian Bay, North Channel & Lake Huron Guide is available for purchase at ...
Professional boatbuilders don't want to have to redo a job any more than a DIYer. Many choose Life ...
Since its introduction last year, the JBL by Harman Marine BassPro 10" Powered Subwoofer (JBLMBP10) ...
After decades of perusing charts and guidebooks as part of planning a cruise, it was a totally ...