Oct 25, 2018

Build a Ridgepolebuild a ridgepole of 2x4’ and 1x2’s on the foredeck of a cruiser

DIY Shrink-wrap

Last time, I described the importance of covering your boat to protect it for the winter, and listed a few options and discussed their pros and cons.

This edition, I’d like to delve into the process of shrink-wrapping. Many find this to be the optimal method of winter protection.

Shrink-wrapping is a bit of a mystifying art to a person who has never done it before – and I have yet to see a first-timer wrap a boat perfectly. That said – it is highly gratifying, and quite cost effective (over time) to shrink-wrap a boat yourself versus paying a contractor to perform this work

The Tools:

a) A roll of Shrink-wrap – Purchased through a contractor, marine supply store, or wholesaler. Along with the wrap itself purchase a roll of shrink tape and adhesive.
b) A heat shrink gun (or any sort of propane torch): I use a torch designed to burn off weeds, purchased from a farm supply store!
c) Propane hose and Tank (such as can be used on a BBQ)
d) Cordage: can be bought along with shrink-wrap – but high-quality, low-stretch and heat resistant twine can also be used. I prefer flat, braided cordage, designed to be used with shrink-wrap
e) Lumber: 2x4’s and 1x2’s – from a lumber yard
f) 2” wood screws
g) A power drill
h) Padding: pieces of carpet, cardboard, foam or pad
i) A jig-saw or handsaw for cutting lumber to length
j) A measuring tape – preferably the flexible roll type

The Method:

1) You’ll need to take a few measurements aboard before buying your supplies. Shrink-wrap comes in a variety of widths and lengths. What you’ll need to buy will be dependent on the ridgeline, or ridgepole that you’ll build with 2x4s on the boat’s deck.

The Ridgepole supports will be vertical 2x4s, and the length of the ridgepole will be of 1x2s. The ridgepole will be curved, running from bow pulpit to transom, with supports every 8 feet or so. Therefore, a 12’ boat will only need one support, but a 35’ boat will need 3.

Amidships, the ridgepole supports should be tall enough so that the angle from ridgepole to gunwale is anywhere from 30-45 degrees (so that snow, rain and ice will slide off the wrap)

2) Use cordage and tie from each ridgepole to cleats or stanchions, providing lateral support (we don’t want the ridgepole to fall over or collapse).

3) Next, use cordage to wrap around the width of the hull. The cordage should be as tight as possible, and mid-way between the waterline and gunwale of the boat.

Shrink Wrap Measured Shrink-wrap has been measured and draped over the boat

4) Once the ridgepole has been built and supported, we can measure to determine the length of width of shrink-wrap required.

Length – from the cordage at the bow, over the bow, along the ridgepole, over the transom to the cordage on the transom’s hull.

Width – at the boat’s beam (the widest point), measure from port to starboard, over the ridgepole. Add about 18”.

5) Once you’ve sourced, purchased, and cut to length your shrink-wrap, it needs to be draped over the boat, with the ends tucked under the cordage on the hull. Keep the wrap hand-tight (there shouldn’t be a lot of slack), but don’t use excessive force at this point. The wrap has yet to shrink – if it’s pulled too tight too early, it will shrink and put pressure on stanchions or deck hardware causing damage!

6) Next – use the heat gun to tighten the folded edge on the hull. Work your way down one side of the boat, then the other – heat up the wrap, and tap it with a gloved hand, creating a seam

Wrapped With Cordage The bottom edge is wrapped around cordage, creating a seam or hem

7) Use cordage to tie the seams together from port to starboard, under the belly of the boat. As the shrink-wrap tightens, this cordage will prevent the seam from rising.

8) Continue heating the wrap. Work your way slowly from seam to gunwale, from bow to stern.

9) Once the lower section has tightened up, move again from bow to stern, but from gunwale to ridgepole. Try to hit every part of wrap with heat, until all the wrinkles are out. Sometimes it’s helpful to heat once, let it cool, and return again in ten minutes or so to re-heat.

10) During this process, you may see that seams, holes or marks have developed in the wrap – these can be fixed by covering over or repairing using shrink-tape which works the same way that tape works, but also shrinks and tightens as it’s heated.

11) Add vents at high points on the wrap to allow airflow and any humidity to escape.

 

A few extra notes:


Completed Shrink Wrap Completed smaller boats

Try to make sure that the boat is clean and dry before shrink-wrapping. If bilges have water, if damp or wet covers or lines are left inside the wrap, they can lead to mildew or mould over time.

While shrinking, you’ll be working with a live flame – please keep a fire extinguisher handy, just in case. Shrink-wrap is designed to heat and melt, not burn – but accidents are possible. Please take care.

If you find that shrink-wrapping isn’t for you, there are likely many contractors available who can do this work for you.

Ask Andrew

 

Andrew McDonald is the owner of Lakeside Marine Services – a boat repair/maintenance firm based in Toronto. Andrew has worked in the marine industry for 12 years and is a graduate of the Georgian College ‘Mechanical Techniques - Marine Engine Mechanic’ program.

Questions or comments for Andrew? Email him directly via: This email address is being protected from spambots. You need JavaScript enabled to view it.

Related Articles
Maintenance
  • 08 January 2020
  • By Ethan

Ask Andrew – Shrink wrap

In Nov 2019, I was fortunate enough to attend the Boating Ontario conference in Niagara Falls ON. This conference is geared to members and suppliers of the marine industry particularly marina...

Lifestyle

  • Prev
We admit it, this Photo of the Week shot was just too cute to resist even though it was blatant ...
Reader Lorraine Gentleman took some liberty with our request for Photo of the Week shots from the ...
This afternoon portrait of her son enjoying a snooze in a pretty unlikely spot comes to us from ...
I've been cleaning dresser drawers for space and came across this 1979 LYRA t-shirt. This was my ...
Our Photo of the Week comes from one of our CY team members who writes “This is my son and his best ...
This boat carries the distinction as the last boat to leave the C&C Custom shop in Oakville ...
We crossed Lake Ontario from Oswego with a minimum of fuss and did a little happy dance when we ...
Our Photo of the Week comes from Mark and Lisa Harris who winter in Vancouver, Washington and spend ...
I am new to boating. Bought a 2019 Ranger Tug in April followed by taking a short boating course ...
Arie and Maribeth sent us this photo from their honeymoon departing Killarney…I think they were in ...

Boat Reviews

  • Prev
With a philosophy of quality and 'doing things right Ranger Tugs launches the all new R-25 at the ...
The new Beneteau Swift Trawler 41 renews the spirit of the practical seaworthy cruiser. The ...
The Canadian Yachting test crew last week had the opportunity to run the Bavaria S36 HT at St ...
ILCA is seeking new builders to complement its existing network of manufacturers, the International ...
Nelson Gilbert (1854-1921) began building canoes in Brockville in the 1890s, a time when the sport ...
I have heard a lot of talk lately about trends in yacht clubs where senior membership is getting ...
To get you in the mood for cruising the Boat Show then launching in spring, here’s a boat that ...
Quite simply, the styles of boats have changed. Where in past years a buyer might have been looking ...
At the boat shows, the Ranger Tugs’ classic tugboat lines always grab the crowds, with the wives ...
Sometimes a great idea requires an encore, and French yacht builder Jeanneau got that with the ...

Pursuit DC 235A Great Boat for Canada and Mom Approved Too!

By Jill Snider and Andy Adams

Coming from two different directions, Jill Snider and I met up at Crates Lake Country Boats in Orillia, Ontario to run and review a new Pursuit DC 235, a deep vee dual console boat that is an offshore inspired bow rider with strong fishing overtones and a wide range of family features.

It’s what I would call a handsome, classically styled boat that I suspect will still look fresh many years into the future. Jill had a different take on it.

 

Read more about the Pursuit DC 235.....................

Destinations

  • Prev
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...
If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you ...
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...

Moorings In BrazilWith an increasing amount of interest in South America as a charter destination, The Moorings has responded with a new base in Paraty, Brazil. Surrounded by towering jungles plummeting into the waters of Baia Carioca, this charter cruising region features bays peppered with islands and world-famous beaches.

Centrally located between Rio de Janeiro and São Paulo, Paraty (pronounced “Para-chee”) holds the key to many natural wonders you can only discover by boat.

Read more about Moorings' Brazil Charters......................

 

Marine Products

  • Prev
It is not often I get to drive the newer model of something I own. Most of the time the model I own ...
Good news cruisers, it’s coming in early Summer 2020 – PORTS Rideau Canal and Lower Ottawa River ...
Few things are as frustrating to a boat owner as being becalmed or running out of fuel—or both. If ...
Every cruiser in the region has used it for years, but now there’s a brand new edition of the ...
When you visit the Toronto Boat Show, come to the Canadian Yachting booth (#1741), trial a pair of ...
With the Davis Scrubbis Underwater Hull Cleaning Kit it's easy to rid a boat of algae, grass, and ...
There is nothing worse for me to have too many keys on your key chain. Even if I move a few to ...
One of the most important boat-ownership tasks is cleaning the bilge. Not only does it reduce ...
Most dock boxes aren't sturdy enough to sit on. Nor are they too comfortable. Finally! - the ...
Too hot to bake? No oven onboard anyway? Try these no-bake shipboard treats. (Yes, we know they’re ...