sail_boat_review-laser_radial-smallAs we look forward to the 2012 Olympics in London, two classes will be front and center: the Laser for Men and the Laser Radial for women. The Laser Radial might be, for some, a non-event, but for those who started to learn the sport for fun (and for racing), the Laser Radial was a monumental leap in design, taking a great concept and making it better. The "Laser" was brilliant at the time and still is today. Low cost, strict one design specifications, performance, both easy to rig and sail were all great features built around a two-section mast that slipped together for sailing but came apart easily for trailering or car topping.

sail-beneteau_first_10r-smallI first saw a 10R in Annapolis and then again in Toronto at the recent ABYC one design regatta. It's a boat that catches the eye, especially with the likes of Jamie Kidd at the helm. Kidd has won more world championships than most and is probably one of the top talented sailors that never made our Olympic team. He is knowledgeable and competitive. Top sailors in Canada and around the world are flocking to this boat because it does not compromise in performance, look or style. The local Toronto results are a Canadian testament to the solid racing characteristics of this boat.

Martin 242There is something about the look of the Martin 242 that makes it stand out in the gaggle of 24-footers you find in most marinas today. It's difficult for it to hide. The tall fractional rig, with its huge main, is a dead giveaway. This is not your ordinary weekender. There is something about its knuckled forefront and wide, slightly racked transom that suggests speed and power.

 

 

Tanzer22125Quebec's Tanzer Industries Ltd. launched the first Johann Tanzer-designed Tanzer 22 in 1970. The launch was well-timed, for the ensuing decade brought unprecedented growth to the sport of sailing. This small sailboat surfed into the leaders of the fleet of vessels in this size range which builders turned out in great numbers to satisfy the demand for introductory ballasted boats. Most of the 2,270 units built were constructed in Dorion, Que. The boat was also produced in Edenton., N.C., (270 units) and in Arlington, Wa. (167 units). Offered in fin keel and keel centreboard configurations, only about 200 centreboards were built as they were not competitive in racing fleets. In 1985 Tanzer gave the Tanzer 22 a "facelift"...

Kirby25125Skipper Jim Matthew is nice enough on land. He smiles, issues pleasantries with an English accent and talks about racing. On the water his whimsical Kirby 25 appears with big red lips on a white spinnaker. But don't be fooled. The name of the boat is Poch Ma Hon, Gaelic for "kiss my ass." And the sight of this boat frays the nerves of other Kirby sailors from the Barrie Yacht Club in Barrie, Ontario.

J105125Sitting quietly at its mooring, the J/105 has a mean and hungry look. With low freeboard, a soaring double-spreader fractional rig, open cockpit and an ergonomic deck layout, the 105 is a highly strung thoroughbred, ready to charge out of a starting gate.

J22125We opened our 1984 Lake Ontario sailing season in early April with a test ride on a J/22 the new, small planning keelboat from J Boats, Inc. of Newport, RI. We discovered a fun, spritely yacht packed with performance. Launched in the United States for the 1983 season, the J/22 has been an instant success, with more than 360 boats sold south of the border in less than a year.

 

ideal18125Canada's Conneticuit-based yacht designer Bruce Kirby has long been known for the singlehanded Laser. Of course, he has designed numerous boats in the two decades that have passed since the famous dinghy made its debut, and one of the most recent is the Ideal 18. Although this new design is a keelboat, with a crew of two, the basic philosophy behind it is true to the little boat that made Kirby a household name -- in nautical households.

Shark125When George Hinterhoeller designed the Shark in 1959, he was looking for a boat that would "go like hell when the wind blew". Growing up in Austria's Salzkammergut region, Hinterhoeller was used to light displacement fin-keelers: fast, responsive and exciting. The few sailboats he found on Lake Ontario when he emigrated to Canada in 1952 had heavy displacement hulls. They were ponderous and had a bad habit of hobby-horsing in the rough Lake Ontario chop. This young builder/designer was also bored by their performance. Announcing that he could build a boat that would sail circles around the rest, he retired to the shed behind his Niagara-on-the-Lake home and built Teeter Totter, a hard-chined 22-foot sloop made of plywood...

BYTE125I like sailing little boats. Their spirited performance lets them respond instantly to a puff or to bounce across the waves delivering quick precise feedback for the sailor. There is no sluggishness, no inertia from a heavy lead keel and no crew to buy lunch for. Small boat racing is returning to my local club in Midland, Ont., and a good part of the reason is the simplicity. Preparing the boat for a race is only a matter of minutes. The leader in this field for a long time has been the Laser, a 14-foot singlehanded daggerboard boat designed by Canadian Bruce Kirby. Manufacturing the craft has had its ups and downs but the more than 100,000 boats built are surely a milestone of success.

CY Virtual Video Boat Tours

Virtual Boat ToursWe all love boats and nothing can break us up! So, what better way to spend our time than looking at interesting boats and going aboard in a virtual ride or tour. We have asked our friends at various dealers and manufacturers to help us assemble a one-stop online resource to experience some of the most interesting boats on the market today. Where the CY Team has done a review, we connect you to that expert viewpoint. Our Virtual Show will continue to grow so visit frequently and check it out. If you can’t go boating, you can almost experience the thrill via your screen. Not quite the same, but we hope you enjoy our fine tour collection.

 

Read more about the CY Virtual Boat Tours....................

AXOPAR 37 XC

 

Axopar 37 XCWhole new ball game…

 

Set aside your assumptions and expectations for a few minutes while we try to describe the new Axopar 37 XC that made its American debut at the 2020 Miami International Boat Show. This boat represents a whole new ball game in terms of design, performance, seakeeping and functionality. In fact, I’d say it takes a ‘clean sheet of paper’ approach to boating – it’s that different.

Read More about the Axopar 37 XC..................

Destinations

  • Prev
On May 19, the New York State Canal Corporation today announced an updated opening schedule for the ...
If you have four hours to enjoy a fine tour of one of Canada’s most interesting waterways (let’s ...
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...

DolphinsBy the Canadian Yachting Editors


Canadians are blessed in many ways and especially when it comes to boating. We enjoy some the world’s most beautiful cruising waters and many places are as sheltered as they are scenic.

British Columbia and the Pacific North West plainly have the most breath-taking scenery with the combination of the majestic ocean views and the snow-capped mountains in the distance. It’s like no place on earth when you have a Killer Whale breach beside your little fishing boat.

Read more about Canadian Cruising...........

 

Lifestyle

  • Prev
This interesting shot is one you will remember. It comes to POTW from our pal, photographer and ...
Unknown to us at the time, the quest for VIA-MARA started in 1973 when I saved the back cover of a ...
You will find that many of the yachts travelling up and down the BC Coast have Sea Kayaks on board. ...
The Council of British Columbia Yacht Clubs with over 50 yacht club members has become the voice of ...
Classic boat restoration expert and wooden boat builder Stan Hunter recently sent us this great ...
In Mid June, a floatplane plunged into Constance Bay on the Ottawa River after two planes collide ...
Winter is a fun time for sailmakers in Canada. We grind through mountains of repairs and have an ...
The seasoned sailor mapped out an ambitious course around the world — aboard his 28-foot ...
Clean wake: A concept amongst cruising sailors that stresses the impact that individual behaviour ...
This line-up of Beneteaus can to us from our friends at RCR Yachts in NY State where they are ...

DIY & How to

  • Prev
I get a lot of calls for electrical repairs. Not upgrades or installations – the requests are to ...
Many boats are now on the water after a COVID-imposed hiatus – and with a shortened ‘prep’ period, ...
Wrapping your hull with marine vinyl wrap instead using traditional marine paint seems like a new ...
Boating safety is always—always—a critical consideration whenever you push off the dock, but with ...
Building on our last two editions (Sealants, and Fibreglass, respectively), Gelcoat is the next ...
After a successful R2Ak and regatta season in 2019, I felt that Pitoraq was due for a major ...
Pause for a moment and ponder this question. How much is your life and your safety at sea worth? ...
Last edition we talked about sealants to perform tasks like bedding and sealing. Other tasks like ...
Over the winter, a many-thousand pound fiberglass, wood or metal shell is held in position by only ...
Since the late 19th century, a debate has raged on the relative merits of diesel fuel over ...

Andrew AlbertiIn the past two issues we have been doing an overview of the right-of-way rules. In the first, we did a review of Section A of Part 2, in the second we did a review of the definitions. This issue, we will look at Section B of Part 2, General Limitations, which is essentially limitations applying to boats that have right of way according to Section A.

GENERAL LIMITATIONS

14 AVOIDING CONTACT

A boat shall avoid contact with another boat if reasonably possible. However, a right-of-way boat or one entitled to room or mark-room

Read more about the right-of-way rules.......................

 

  

Marine Products

  • Prev
Stainless steel is an ideal metal to use on a boat, but it's not maintenance-free; it requires ...
Hate running the generator all night and getting little sleep? New lithium-ion battery systems are ...
Wet decking can compromise passenger safety on boats, particularly when boarding or disembarking. ...
Anyone who has repeatedly used a rag to clean gelcoat, paint and delicate surfaces has seen the ...
The new Mercury Racing 300hp Five‑Blade CNC Cleaver propellers are designed expressly to maximize ...
Beneteau may have outdone itself with introduction of its new Gran Turismo 36, manufactured in ...
Yanmar Power Technology has announced the development of a hydrogen fuel cell system for maritime ...
Kevin Monahan is a retired Canadian Coast Guard officer with more than 20 years of experience ...
The new 2020 PORTS Georgian Bay, North Channel & Lake Huron Guide is available for purchase at ...
Professional boatbuilders don't want to have to redo a job any more than a DIYer. Many choose Life ...