Ontario32250By Paul Howard

Oakville's Ontario Yachts was founded by Dick and Maria Kneulman. Although he worked as a boat builder before emigrating from the Netherlands in 1951, Kneulman started a construction company when he first moved to Canada. But by 1961 Dick was building boats-mostly kayaks and dinghies. After only a few years in the business, Ontario Yachts established a reputation for high-quality workmanship and soon Kneulman's Snipes were sought after by North America's top one-design racing sailors. Next, Dick established a world-wide market for his dinghy, 6 Metre and Dragon masts.

As Kneulman's reputation as a boat builder grew, he began to build Olympic-class boats. In 1968, his penultimate year building Olympic boats, nine of his shop's 5.5 Metre yachts raced in the Mexico Olympics. Kneulman accompanied his fleet at these Olympics as a shipwright on the shore support team to ensure his boats were properly tuned and repaired. One of these 5.5's, owned by media magnate Ted Turner, won a world championship in 1972.

During the late '60s and on through the mid '80s, Ontario Yachts established a reputation as a builder of quality fiberglass production boats like the Viking 22, 28 and 33, and 33, and the Ontario 28 and 32. During these boom years Kneulman forged a successful partnership with C&C, which acted as the design team for these yachts.

The Ontario 32 was conceived as a quality performance cruising boat incorporating the industry's latest design features. Kneulman did his homework before he began work on this boat and first visited a number of European Boat Shows for inspiration. Some of Dick's new ideas for the 32 included: a deck anchor locker (a North American first), the lavish use of teak in refined interior cabinetry, a T-shaped cockpit and wide-for-her-length beam. At 11 feet, the Ontario 32 is one of the beamiest cruisers of its size. Even Ted Gozzard's Bayfield 32 is a half foot skinnier. Only the ultra-broad Nonsuch is a wider load.

The C&C partnership worked on the design for Ontario Yachts, with Cuthbertson drawing the hull and Cassian modeling the interior. Underwater the 32 features a long trapezium-shape, flat-bottom fin keel. The rudder is a semi-balanced spade section which is radically different from the swept, scimitar-shaped rudders and keels of the C&C racer/cruisers of that era.

The '70s were the era of a large number of locally built cruising boats like the Bayfield 32, Douglas 32, Aloha 32 and the Niagara 35. Each was built to combine a roomy interior (accomplished by raising topsides and increasing beam) and current design principles for spirited sailing performance. And the Ontario 32 is a fine example of how Ontario Yachts has combined plenty of headroom and an open main salon in a performance cruiser.

In front of the mast the interior is fairly conventional, with a V-berth, head with shower and hanging locker. The main salon consists of a starboard side set-tee and pilot berth positioned just above the salon bench. Moving aft along this side is a smallish U-shaped galley, an aft-facing chart table and nav seat. Finally, an L-shaped settee runs forward to the head bulkhead.

The cockpit is deep, protected and roomy. With their high coach roof and large cockpit, a number of 32s have been retrofitted with full cockpit enclosures which offer cabin cruiser size shelter. A full coach roof distinguishes the Ontario as a cruising boat-not a racer/cruiser. The Ontario 32 strikes a nice balance, looking robust and cruisey without any traditional wooden boat gingerbread. The production run of 158 Ontario 32s ran from 1977 through to 1986.

Ontario Yachts is also a workshop for the national sailing team, where Olympic-class sailors are welcome to shape centerboards, build new rudders or make other modifications to their boats. Dirk is an avid sailor and has followed his father's footsteps in that he acts as a shore-base repair and boat-prep expert at international competitions. In this capacity he has been shipwright for Canada's National Sailing Team for the past three Olympic Games.

In 1977 my long-time friend, Don Allin, was looking for a cruiser that he and his wife could handle while short-handed. Don has a physical disability, with the full use of only one arm. During a visit to Ontario Yachts, Don was impressed with Kneulman's work and, while he could have purchased a new Alberg 37 for the same money, ordered hull number 45, named Salut.

Don had only sailed three times before he took delivery of Salut, yet aside from larger self-tailing winches and beefier offshore sails, he requested few other changes to the stock boat. He recalls that he was so green when he first motored off the dock, he shouted back to ask how to shut off the diesel engine!

In 1981 and '82 the Allin's sailed Salut more than 20,000 miles. Though Don is now single, he still sails about 1,000 miles annually in Georgian Bay, mostly single-handed.

Allin comments that the boat has an amazing amount of interior volume for a 32-footer. He claims the Ontario is forgiving to sail and takes all of his mistakes and learning experiences in stride. In knock-down situations the boat just side-slips and carries on. Allin says Salut has never leaked around the port lights or hatches, and 18 years later she remains dry and comfortable.

The Ontario 32 is not a competitive club racer but because of its wide beam to length ratio it is a solid off-wind cruiser. Given the 32s shape and size its performance is decent, though a big breeze helps the yacht get up to speed.

Don Allin wasn't satisfied with the stock 12-hp diesel auxiliary and has since upgraded to a 20-hp model. He observes that even with the larger diesel Salut will not motor well into steep chop because of its wide beam and high top-sides. The propeller shaft is offset (as it is on several C&C designs) and exits the hull on an angle. As a consequence the propeller will cavitate in certain rough conditions and she is slow to get moving under power.

Allin has also added bow anchor rollers, increased freshwater tankage to 66 gallons and installed a larger 40-gallon holding tank. As this enthusiastic and long-time owner sums up his boat, "If you are looking to sail and live aboard, she is a beauty."

Ontario Yachts is still located on Speers Road in Oakville, but is now run by Kneulman's son Dirk. It is still a beehive of activity, although OY no longer produces large keelboats. During my recent visit, General Manager Don Oakie showed me the moulds for their newest dinghy called the Mosquito -- a variation on the Optimist. Both he and Dirk also build the Sonar, Ideal 18, E22, Albacore and Optimist. In 1995 Oakie expects to produce close to 100 boats at the shop.

I recently visited Kneulman, now retired, at his modest country home near Oakville. While we fed the chickens and collected eggs, he told me of his experiences at the Olympic Games and of the friendships he had formed over the years with the people for whom he had built boats. Dick impressed me as a solid and quiet man, proud of his accomplishments. His workshop was cluttered with other left-overs of his boat-building years; photos of favorite boats and a small fleet of half-hull models. Outside his yard was littered, as one might expect with boat parts and hull moulds. Stacks of timber lay about. Nearby, the plug for the mould of the keel of he Ontario 32 lay weather-beaten and warped under an apple tree.

Originally published in Canadian Yachting's Winter 1995 issue.

Specifications

LOA             32 ft.

LWL             26 ft. 6 in.

Beam             11 ft.

Draft            4 ft. 6 in.

 

 

Destinations

  • Prev
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...
Vancouver-based Big Blue Yacht Charters Worldwide owner Emma Murdoch explains that luxury crewed ...
In the 1920s, a small cove in Canoe Bay was used as a shipping point and safe-haven for rum runners ...
Here’s an update from Caroline Swann with some news for the adventurous types who may be heading to ...


The Marina at Blind ChannelOne of my favourite places

By Marianne Scott

Sailing north of Desolation Sound, the Discovery Islands and the Broughton Archipelago offer cruisers a bevy islands with ample anchorages. Tides cause swift currents to run through the islands’ waterways. Few marinas are found in this large, sparsely populated region but one that provides all the services boaters need and especially enjoy is Blind Channel, a marina and resort operated by the Richter family located on Mayne Passage on the east side of West Thurlow Island (50 24. 82N, 125 30. 00).

Read more about the Blind Channel Resort...

 

Lifestyle

  • Prev
At the end of last month, Canadian sailors gathered on the Palma Beach in Palma de Mallorca, Spain ...
In 2019, C-TOW celebrates its 35th anniversary of providing 24/7 “Peace of Mind Boating” for ...
West Vancouver Yacht Club reports that following an independent certification process the Georgia ...
It has been hot in the Abacos this winter. Whoever said this area was cool this time of year must ...
Unfortunately this is not a picture from a boat but was taken on the evening of February 27, 2019 ...
On March 1, Tom Ramshaw of Stoney Lake Yacht Club was honoured with the most prestigious National ...
Vero Beach, aka Velcro Beach, lived up to its reputation again. Our original plan was to be there ...
My husband and I were visiting the Bra d'Or Lake from Newfoundland in our 39 foot Sea Ray ...
After an autumn in Canada, we arrived back in northern Florida at Adamant 1 on January 3rd and with ...
This issue, to kick off 2019, we have an unofficial Photo of the week and this, the unofficial ...

Swift Trawler 47By Andy Adams

You might look at the pictures of the new Beneteau Swift Trawler 47 and think that this is not a “performance boat”, but I think it certainly is, and here is why; it can top out at 30 mph to get you from A to B quickly or to beat the weather in, so it’s pretty fast, but it can also loaf along doing 1,250 rpm making 9.3 mph and at that pace, it travels 2.4 miles on a gallon of fuel. That’s great performance in my books!

With a light displacement of almost 28,000 lbs, this is a big boat. In fact, it looks and feels more like a small ship than a big boat.

Read more about the Swift Trawler 47......

 

Beneteau Oceanis 46.1By Andy Adams and John Armstrong

Beneteau Oceanis 46.1When Beneteau introduced their new Oceanis 46.1, they were inspired by the fact that their previous Oceanis 45 was one of Beneteau’s best sellers and the new 46.1 had to be a clearly superior boat. The Oceanis range is about space and comfort for cruising while still delivering strong performance.

The yachting world has now recognized the Oceanis 46.1 as being just such a worthy successor. On January 19th, 2019, the Oceanis 46.1 won the highly regarded title of European Yacht of the Year in the “Family Cruiser” category.

Read More about the Oceanis 46.1......

DIY & How to

  • Prev
I’ve had two emails over the past few weeks with a count-down to launch (47 days per the last ...
Electrical ground is a term used to describe the reference point in an electrical circuit from ...
Last time we looked at making proper electrical connections – the tools, supplies and methods ...
Winter is a great time to look at some of the hidden spaces on your boat – to take stock of what is ...
When a boat is in the water, the bilge will often collect water that enters the boat from weather, ...
Recently I suggested doing an off-season (winter) project with a potential client, and my ...
A recent conversation with a fellow contractor got me thinking: With all of the information out ...
As the cold approaches, shrink-wrapping is a hot topic, and I’ve heard more than a few debates at ...
Nothing stops a vacation faster than a problem with the fresh water system – be it leaks, smells, ...
Pyrotechnic distress flares have been around for decades, while electronic strobe distress flares ...

Sea to Sky SailingSea to Sky Sailing has just been approved as the only Royal Yachting Association (RYA) recognized training centre on the west coast of North America just in time to deliver an epic 2019 season!

“This transition from our previous International Yacht Training (IYT) certification to RYA is a huge benefit to our students as it provides them certification that is known globally as the gold standard for yacht training.  The RYA requires training centres to undergo annual inspections of their vessels, business practices and training delivery in order to maintain a strong standard and guarantee a high quality experience for students. 

Read More about Sea to Sky Sailing......

 

  

Marine Products

  • Prev
The Walker Bay Venture 14 claims to be the world’s first luxury Explorer Sport Tender. It is ...
Mercury Marine is pleased to announce the launch of the new MerCruiser V8 6.2L 370hp Jet Ready ...
My history with the Cayenne goes back many years, as I was at the launch of the original vehicle ...
Last month, Mercury Marine has announced the launch of the 400hp Verado outboard engine, the ...
Featuring advanced, intuitive 3D controls, Zipwake Dynamic Trim Control Systems deliver a more ...
Gina de Vere approached me at the Canadian Yachting booth at this year’s Vancouver International ...
A revolutionary “assisted docking” system that provides a glimpse into the future of boating ...
After developing the Figaro Beneteau 3, the first production foiling sailing yacht, Groupe Beneteau ...
You most likely operate your vessel with batteries that are rechargeable. Rechargeable batteries ...
This past decade has been a real up-and-down ride for the companies who make boating equipment. ...