Albacore

By George Roth

Dinghy sailing is a passion for many and enjoying keen racing in Albacores is part of that passion.

An Albacore is a 15 ft. vision of the boat's designer, Uffa Fox, who planned the design in 1948 in England as a simple planing dinghy for the active sailing community - perfect for family, friends, racing, pleasure, and instruction. The Albacore today, 42 years later in Canada, still fulfills those ideals. Hulls are built of various materials such as mahogany, cold rolled over a mould, or foam core fiberglass reinforced. Spars are aluminum to a height of almost 26 ft. with foils made of laminated Sitka spruce, wrapped with a fiberglass coating.

A licensed builder, Ontario Yachts of Burlington, Ontario, constructs all new Canadian boats. The building specifications require that the hull is measured to the International Class rules, maintained as part of the copyrighted design. The class rules have been designed to establish the measurements and specifications that describe the Albacore design. The rules can only be changed by joint agreement among the member associations of the International Albacore Association.

The Albacore, by definition, has been a one-design class since its inception. The objective of the class is to maintain a standard that is simple and withstands idle design tinkering which does not add value to the performance of the boat. Clearly, by keeping fairly rigid standards, boats built 55 years ago can compete effectively with hulls coming out of the moulds today. Most importantly, the Albacore owner does not have to incur the unnecessary expense of constant upgrades in the hull. Thus, competition occurs among boats of equal caliber on the water. The bottom line: it's the performance of crew against crew that really counts.

The Canadian Albacore Association (CAA) is the national association of Canadian owners of Albacore dinghies. The association was formed in 1961 and celebrated its 40th year of operation in 2001. Rumor has it that the late Bill Gooderham created the demand for this boat back in the early '60s simply by planing back and forth on the Muskoka lakes. Wide-eyed cottagers apparently lined up with cheque­ books in hand at the end of their docks to place an order for the Albacore (then imported from England) following his display. A planing Albacore still has the same effect on prospective boat owners 42 years after its arrival in Canada but with one added benefit. The class now has a history supported by a well-established class association.

Albacore racingThe CAA is one of five international fleets of Albacore owner associations. The other officially formed fleets are in the United States, England, Scotland and Ireland. Additionally, we often hear from less formally structured groups in Cyprus, France and Wales.

The association has come a long way on the strength of its volunteer executives and members since 1961. Today, the major fleets are concentrated in the Ontario cities of Toronto and Ottawa, where regattas and club events occur weekly during the active sailing season. There are large groups of Albacores sailing in the Ontario southwest and the regional areas of Muskoka and Haliburton lakes, many as pleasure sailors. Smaller fleets sail in British Columbia, Alberta, Saskatchewan, Manitoba, Quebec and areas of the Maritimes on small lakes or man-made reservoirs.

Supporting the competitive side, international events are held on a bi-annual basis, rotating between Europe and North America. In 2003, Canada hosts this event in Kingston, Ontario from July 20-26 and will attract sailors from England and the US to make a fleet of nearly 60 boats. In the Toronto area, there are scheduled regattas and club races beginning in May running through September. Some are quite easy to enjoy as a spectator, such as the keen club races on Lake Ontario between the community clubs on Friday evenings. This event alone attracts from 45 to 70 boats in a race, many are beginner sailors being introduced to the passion of Albacore sailing. Some seasoned sailors/observers have said that this represents the largest on-going club race series in a one-design dinghy class worldwide. That's quite an honour for a 55-year-old design.

So, what is it like to handle these round bottomed, flared to a tapered flat shaped hulls that allow this passion of "planing" action? From the eyes of a seasoned competitor, some word pictures as a race progresses...we call it an adventure!

To make "Albs" go well in a breeze, several things need to come together simultaneously. A well-tuned boat is a given. Making it give the jubilation you want results from having two people in the boat who understand it. In a breeze, when a crew understands the tactics of boat handling, performance comes easy. You can both relax and enjoy the moment, regardless of the weather. What you do is to live on the edge, pushing the boat to the extreme, especially on the beam -reaching legs of a course-reaping the flight down the wild side of dinghy sailing that's the dream in all of us.

Albacore designNow the race. The weather mark is not quite a 1/8 of an inch high on the horizon, if you can see it off to the north, as is the gybe mark to the west, all set for us to pass to port. The gun goes and we're off -often, one boat is over the line early. The rest of us hike out as we head windward, across whitecaps in the bay. We reach the first mark -now taller than 1/8 of an inch. The sole boat that went right is trying to get around first. Another is there...still another is following behind. We all

round the mark and head down on a broad reach, and whenever possible, up on a plane. The gybe mark approaches followed by a screaming beam reach. The higher we go, the faster we go, as much for the passion as for the screaming for that "fix." Someone else gets to the leeward mark first. We're on his heel. Back to weather...tack..flatten...hike...head up ...drive the boat...tack. We're crossing him. Now comes another on the starboard lay line. We're around and off again on the broad plane. One more gybe...back to weather...heading for the finish. We got him...wow...another first!

The "fix" will carry on as we all roll the mind images on reruns in those moments of daydreams. May there be more days of this celebrated Albacore sailing passion.

To find out more, visit www.albacore.ca.

 

George Roth is an avid Albacore sailor and currently holds the position of Chief Measurer on the Canadian Albacore Association.

 

Originally Published in Canadian Yachting's June/July 2003 issue.

 

SPECIFICATIONS

Manufacturer: Ontario Yachts

Overall Length: 4.6 meters

Beam: 1.6 meters

Minimum Hull Weight: 109 Kgs (240 lbs)

Full Rigged Weight:136 kgs. (299 lbs) 

SailArea - Mainsail: 8.3 m2

SailArea - Jib: 3.2m2

Draft Centreboard Up: 0.2 m2

Draft Centreboard Down: 1.4 m2

 

Related Articles
CY Snapshots
  • 07 August 2019
  • By Elissa

POTW: August 8, 2019

This shot was taken last week by Jessica Lee, a freelance photography pro, Albacore racer and part time crew.  We were aboard Esprit de Corps III, one of Canada’s few internationally competing...

Lifestyle

  • Prev
We crossed Lake Ontario from Oswego with a minimum of fuss and did a little happy dance when we ...
Our Photo of the Week comes from Mark and Lisa Harris who winter in Vancouver, Washington and spend ...
I am new to boating. Bought a 2019 Ranger Tug in April followed by taking a short boating course ...
Arie and Maribeth sent us this photo from their honeymoon departing Killarney…I think they were in ...
This shot was taken last week by Jessica Lee, a freelance photography pro, Albacore racer and part ...
On a sunny and windless day we led Alicia and another sailboat into New York Harbour. There were ...
It was a trip 2 or 3 years ago, and all 4 boats traveled up to the Killarney area in a ...
My name is Alexandrine GOVAN, mother of a 5 years old girl and I found your contact on internet. ...
John Booth, who passed away just a few weeks ago was one of the most amazingly gifted and ...
We left Vero Beach on Saturday morning with Alicia, a boat from Sweden, following close behind. The ...

DIY & How to

  • Prev
The new editions of PORTS Cruising Guides, from the publishers of Canadian Yachting will be ...
As the seasons change and we move from warm summer into cooler fall, many fanatic boaters ...
On the Friday before a weekend with a gorgeous forecast, I heard on the news that a boat had ...
A reader suggested we take a look at anchors. Anchoring seems simple enough. A weighted hook with a ...
If you’ve spent any time in a boat yard during spring commissioning season, you won’t find it out ...
As a busy marine mechanic, I tend to have the same or similar conversations often, and they’re ...
This time of year, great deals abound. That boat with the ‘for sale’ sign looks quite attractive. ...
For less than US$2,500, Jim Leshaw, a lawyer who lives and works in Key Biscayne, Florida, ...
Each spring, I tend to notice canvas. I wish it was because it’s been immaculately maintained and ...
I’ve had two emails over the past few weeks with a count-down to launch (47 days per the last ...

Leasing a YachtBy Andy Adams

When I first saw the display at the Toronto International Boat Show saying that you could lease a new yacht, it stopped me dead in my tracks. While I had never considered leasing boats, we are certainly seeing growth in boat rental organizations, so leasing didn’t seem out of line. In fact, I wondered why it had taken this long to see boat leasing come to the market.

However, I have a reasonable understanding of how leasing works compared to financing a purchase and I wondered how the numbers could work for something like a yacht. The sign was in front of a 60 foot Princess Express Cruiser – about $3,000,000 

Read more about Leasing a Yacht............

 

  

J99By Katherine Stone

All set to pull out the Code 0 before dousing the jib.

It was a very cold and wet beginning to the summer and we never thought it would arrive in Southern Ontario. Doing a 100 miler race on Lake Ontario (billed as the COOLEST race on the lake) with my 8 layers of thermal clothing, woolen ski toque and ski mittens, along with a neck warmer kept me on the edge all night, just out of frostbite reach. I shouldn’t have complained, as we also had wind!

July and August arrived, and it has certainly warmed up, in fact, its too warm, AND we don’t have wind. We are now counting 5 Wednesday nights in a row without wind to race. 

Read more about the J99 Offshore Shorthand Speeder.....................

 

Wellcraft 242 FishermanBy Andy Adams

Boat buyers are gravitating to the latest centre console boats for a wide range of reasons but for the Wellcraft 242 Fisherman, you can sum it up by saying it’s about features, style and value.

This great-looking boat is just as capable on a family picnic cruise as it is doing serious blue water fishing. A wide range of options let the buyer tailor the boat for their specific interests, but it’s all there to choose from. Our test boat was well-equipped for that comfortable cruise with easy access via the swim platform and through the transom gate into the cockpit.

Read More about the Wellcraft 242 Fisherman..................

Destinations

  • Prev
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...
If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you ...
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...

Port Severn's Lock 45Blake Marchand


As the final link between Lake Ontario and Georgian Bay, Port Severn’s Lock 45 is the gateway to the beautiful Trent-Severn Waterway. The first and smallest lock to be constructed on the Severn portion, Lock 45 is entrenched in Canadian History and is worth the trip in itself. However, it is the waterway and its idyllic surroundings that will keep you coming back.

The canal connects Lake Ontario and Lake Huron with an eastern terminus in Trenton and a western terminus in Port Severn. Its amazing natural waterways include the Trent River, Otonabee River, The Kawartha Lakes, Lake Simcoe, Lake Couchiching and Severn River.

Read more about Vancouver...........

 

Marine Products

  • Prev
Navigating the process of yacht care and maintenance just got a whole lot easier, following the ...
I will be honest, I am generally not a big fan of Sport Utility Vehicles (SUV). My wife and I own ...
In the April 2015 edition of CY magazine, I published an article on anchors and anchoring – Staying ...
The Seabin device part of the Oak Bay Marine Group trial, has had promising results so far while ...
When I took the Mitsubishi Outlander PHEV down to Wednesday night racing, the people that came over ...
Protecting your boat from scratches and dents isn’t always easy. That’s why the Big Bumper Company ...
Rancho Santa Margarita, CA - Forespar has just introduced a new smaller size version of their ...
As boaters we all have a very unique connection to the water and all the opportunities it presents. ...
Edited by the Quebec Marine Association under the direction of L'Escale Nautique (producer of the ...
Blue Guard has announced the general availability of the BG-One, a solid-state bilge pump switch, ...