Nelson250Nov2Built initially by Martin Yachts in Vancouver for IMS (International Measurement System) and ultimately for one design racing, the Nelson/Marek 36 is a design with focus. Until a fleet is established, however, racing under the IMS rule will have to be endured, as the real goal is to race identical boat against identical boat to test the talents of skippers and crews.

The design brief to the California team of Nelson/Marek was not unusual-demanding "a top performer in today's typical windward-leeward courses." Another decision at the outset involved the sailplan. Interestingly, they chose mast and boom dimensions that exactly match those of the Bruce Farr designed Mumm 36 -- one of their chief competitors. This will allow owners of the N/M 36 to compete in "away" regattas (presumably in borrowed Mumm 36s) and to take their own set of sails with them. They are hoping that they can add a little incentive to early owners by joining in the Mumm 36 established success but at a considerably reduced cost. Ian Fraser, the dealer for the N/M 36 from Westerly Yacht Sales, considers this boat a much better value than the Mumm (but then what salesman worth his salt wouldn't make such a claim). I'll let you be the final judge.

These matched sailplans give us a chance to compare the design decisions of two top ranked designers -- Bruce Farr and Nelson/Marek. Each has chosen a 36 foot boat, but Nelson Marek has narrowed the beam to 10 ft. 4 in., 18 in. narrower than the Farr boat. Most of that beam has come out of the topsides (the beam difference isn't that great at the waterline), resulting in a boat that has much less flare. The America's Cup class has followed the same trend, although I must be cautious making this comparison for the rules under which the boats sail are entirely different, with this year's crop of A.C. hulls being significantly narrower and more slab sided. Reducing the overall beam will lower the resistance as the boat heels in the upper wind strengths -- it is simply a slimmer boat and easier to push through the water. In light air the flare or no flare decision has little effect. The significance to the sailor is that the Nelson Marek will tolerate sailing upwind heeled, while the Farr boat will want to be kept more on its feet.

In an upwind boat speed contest between these two designs, it's too difficult to predict the winner. The Nelson Marek is lighter, claiming they can build the boat 500 pounds lighter than the Mumm, and has the same keel weight poured into a larger shallower keel. The tall thin rudders are very similar. I suspect the leeways while sailing upwind will be comparable. Farr has gone with more draft (which should reduce leeway), but less area (which will increase leeway). Upwind speed will be greater on the Farr boat because of the reduced keel area, but less because of the greater boat weight. To really determine the winner, you need to push both boats through a performance prediction, or let them loose on the water - something that will happen soon I am sure.

Downwind the efficiency of the keel is not a factor, but wetted surface and sailing length are. Nelson/Marek are hoping that the lighter weight of the overall boat makes up for the extra wetted surface of the larger keel.

The hull, deck and interior are constructed of E glass (what most sailors think of as normal fiberglass) and S-glass (high strength glass) bonded with epoxy resin and vacuum bagged to eliminate entrapped air and unwanted excess resin. Foam and balsa core are used selectively with the balsa incorporated in areas with high compression loads. Indicative of the high end racing market, the rudder is carbon fibre construction.

The back page of the promotional brochure for the N/M 36 is entitled "cruising comfort". I think you don't really want to cruise on this boat and it's certainly not my definition of comfort. With a galley split on port and starboard, no oven, no table, no chart table, no separate cabin aft and no bureau storage, it's not the boat for a two week holiday. It is however, the boat for evening races, weekend regattas and Key West race week. Just like other light displacement racers, it is a purpose built racer that will cut to windward like a knife and take off down wind.

Specifications

LOA            35 ft. 7 in.

Beam            10 ft. 4 in.

Draft             7 ft.

Ballast             3,500 lbs.

Weight             7,600 lbs.

Sail Area            643.5 sq. ft.

To see if this boat is available, go to http://www.boatcan.com for listings!

 

Lifestyle

  • Prev
I've been cleaning dresser drawers for space and came across this 1979 LYRA t-shirt. This was my ...
Our Photo of the Week comes from one of our CY team members who writes “This is my son and his best ...
This boat carries the distinction as the last boat to leave the C&C Custom shop in Oakville ...
We crossed Lake Ontario from Oswego with a minimum of fuss and did a little happy dance when we ...
Our Photo of the Week comes from Mark and Lisa Harris who winter in Vancouver, Washington and spend ...
I am new to boating. Bought a 2019 Ranger Tug in April followed by taking a short boating course ...
Arie and Maribeth sent us this photo from their honeymoon departing Killarney…I think they were in ...
This shot was taken last week by Jessica Lee, a freelance photography pro, Albacore racer and part ...
On a sunny and windless day we led Alicia and another sailboat into New York Harbour. There were ...
It was a trip 2 or 3 years ago, and all 4 boats traveled up to the Killarney area in a ...

DIY & How to

  • Prev
I’ve lost count of the number of times I’ve told my children to wash their hands. I remind them ...
The new editions of PORTS Cruising Guides, from the publishers of Canadian Yachting will be ...
As the seasons change and we move from warm summer into cooler fall, many fanatic boaters ...
On the Friday before a weekend with a gorgeous forecast, I heard on the news that a boat had ...
A reader suggested we take a look at anchors. Anchoring seems simple enough. A weighted hook with a ...
If you’ve spent any time in a boat yard during spring commissioning season, you won’t find it out ...
As a busy marine mechanic, I tend to have the same or similar conversations often, and they’re ...
This time of year, great deals abound. That boat with the ‘for sale’ sign looks quite attractive. ...
For less than US$2,500, Jim Leshaw, a lawyer who lives and works in Key Biscayne, Florida, ...
Each spring, I tend to notice canvas. I wish it was because it’s been immaculately maintained and ...

CompassBy Katherine Stone

Not a hard re-installation - just line up the holes and replace the screws.

I remember vividly my first experience using a chart plotter and navigation system. Deciding that we should try the cruising lifestyle, we purchased an older boat and set out from Hindson’s Marina in Penetanguishene at dawn to sail across Nottawasaga Bay to Thornbury, Ontario for the Canada Day long weekend. It was a beautiful start to the day when we left and motored out of Penetanguishene Bay and rounded the corner, heading toward Christian Island, right into pitch black clouds. 

Read more about Your Compass........................

 

  

J99By Katherine Stone

All set to pull out the Code 0 before dousing the jib.

It was a very cold and wet beginning to the summer and we never thought it would arrive in Southern Ontario. Doing a 100 miler race on Lake Ontario (billed as the COOLEST race on the lake) with my 8 layers of thermal clothing, woolen ski toque and ski mittens, along with a neck warmer kept me on the edge all night, just out of frostbite reach. I shouldn’t have complained, as we also had wind!

July and August arrived, and it has certainly warmed up, in fact, its too warm, AND we don’t have wind. We are now counting 5 Wednesday nights in a row without wind to race. 

Read more about the J99 Offshore Shorthand Speeder.....................

 

Wellcraft 242 FishermanBy Andy Adams

Boat buyers are gravitating to the latest centre console boats for a wide range of reasons but for the Wellcraft 242 Fisherman, you can sum it up by saying it’s about features, style and value.

This great-looking boat is just as capable on a family picnic cruise as it is doing serious blue water fishing. A wide range of options let the buyer tailor the boat for their specific interests, but it’s all there to choose from. Our test boat was well-equipped for that comfortable cruise with easy access via the swim platform and through the transom gate into the cockpit.

Read More about the Wellcraft 242 Fisherman..................

Destinations

  • Prev
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...
If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you ...
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...

KingstonBy Amy Hogue

Cruise into the city of Kingston, Ontario, and it will quickly become clear that this city and surrounding waterways have something special. Built around the northern shore of Lake Ontario, Kingston is the place to go if you love to explore new waterways, fantastic views, and exceptional boating opportunities.

Sitting at the intersection of three world-class Canadian bodies of water, Lake Ontario, the St. Lawrence River, and the UNESCO World Heritage Site, the Rideau Canal (Cataraqui River from Kingston to Newboro), the water’s influence is deeply woven into Kingston’s culture and history. 

Read more about Kingston......................

 

Marine Products

  • Prev
The new edition of PORTS Cruising Guides: Georgian Bay, Lake Huron & the North Channel from the ...
Canadian Yachting’s Chartering Handbook, full of information and advice for heading off to a ...
Navigating the process of yacht care and maintenance just got a whole lot easier, following the ...
I will be honest, I am generally not a big fan of Sport Utility Vehicles (SUV). My wife and I own ...
The FX model is Yamaha's top-of-the-line three seater WaveRunner and a totally new model for 2019. ...
In the April 2015 edition of CY magazine, I published an article on anchors and anchoring – Staying ...
The Seabin device part of the Oak Bay Marine Group trial, has had promising results so far while ...
When I took the Mitsubishi Outlander PHEV down to Wednesday night racing, the people that came over ...
Protecting your boat from scratches and dents isn’t always easy. That’s why the Big Bumper Company ...
Rancho Santa Margarita, CA - Forespar has just introduced a new smaller size version of their ...