CS34250BBy Lloyd Hircock

At Toronto's Dockside in-water boat show September 1989, CS Yachts unveiled its new 34 – so new that it didn't even have an interior. The new Tony Castro design had first been put into production by MG Yachts in England, and CS had yet to sort out its own accommodations plan and detailing. Nonetheless, consumer reaction was positive. Fueled by an innovative marketing concept (introductory price under 90 G's) and some interesting features, the design gained an instant following: ready buyers. (Nothing succeeds like price point.)

"We wanted," said newly installed marketing manager Stuart Robertson "a 'show stopper' to introduce what we believe is the only quality 34-footer in today's market at an affordable price. Our strategy was to target second-time owners and at the same time pitch first-time buyers with a true-value bargain. "The strategy appears to have worked and Robertson was happy to display affidavits from satisfied owners championing the qualities of the new yacht, above and below the waterline.

By the summer of 1990, hull number 70 was shipped and, according to new general manager Jerry Cockerill, customer interest remains buoyant, despite an economic downturn. Cockerill says eight 34s were sold at the 1990 Dockside show. Naturally, with all the favourable comment generated, I was keen to step aboard, go for a sail, and see for myself. But first I toured the CS plant in Brampton, Ontario.

Boasting 115,000 square feet (since the last expansion in 1986) of production space, the company employs 95 workers during peak periods. Presently three designs are offered: the Merlin 36, CS 40 and the 34. A pilot version of the 40, planned for a late fall launch, has been shelved indefinitely. [CS Yachts has since closed its doors, ed.]

Structurally, the 34 is conventionally built to CS standards. There are no exotic glass hybrids here. Hull and deck consist of mat roving with vacuum-bagged balsa coring along the topsides above the boot top and in horizontal deck panels.

To facilitate assembly and cost efficiency per unit, overhead liners, moulded pans and locker panels are employed throughout. Bulkheads and compartment structures are pre-assembled (unitized) then bonded to the unsupported hull. Capping and sealing the moulded deck to the unit completes the basic structure.

Unlike similar designs the CS 34 has a shallow bilge, without a sump. The keel is bolted directly to the yacht bottom. Three keels are available: a shoal draft, winged, and for those racing/cruising enthusiasts a semi-elliptical deep-fin version with bulb. Our test boat sported the deep-fin version.

Like all recent CS designs, the coach house rises high above the deck to accommodate maximum head room below (six feet, three inches). To accommodate headroom in the V-berth area the cabin trunk has been extended forward. The result is a foreshortened bow area which, when coupled with the arrow-straight sheer, creates an illusion of bulkiness forward. In my opinion, the yacht is not as handsome as the recent CS 30, but one cannot deny the practical benefits achieved belowdecks.

While the deck area forward has been shortened, the cockpit remains spacious and designed for maximum comfort. I found the helm seat sufficiently elevated for me to see above the coach roof. Thankfully the unit has been rather comfortably designed, thus reducing the threat of developing a sore touch after a brief stint at the wheel. (Whitlock steering system is standard.) Twin cockpit lockers provide generous storage capabilities while a separate aft locker harbours the propane tank. Although I thought the cockpit well designed and comfortable, I was puzzled by the location of the engine kill switch directly below the helm seat. The unit should be relocated to avoid being stepped on and crunched during watch changes.

I like the deck layout. It is to the point and simple to work. All halyards lead aft to the cockpit, for ease of handling -- resolving the insecurity of deck climbing during foul weather. Directed through blocks fastened at the mast collar, the running rigging travels aft under a moulded deck cover to a bank of rope clutches.

In keeping with the simplicity of the system, the mainsail employs single-line reefing, negating the need for a crew member to go forward to the goose neck and attach the sail cringle to the horn. The practical aspects of this reefing system are readily apparent to sailing families, and provide a safety measure for sail-shortening during adverse conditions.

The mainsail traveller track is fastened forward of the companionway, conveniently removed from the traffic flow in the cockpit. Besides "opening up the cockpit" the track placement creates extra seating that had previously been lost when the track was positioned across the bridge-deck below the companionway.

The CS 34 rig is a bit of a surprise -- it is deck stepped. The untapered Isomat section boasts a double set of spreaders and masthead rig. Having a deck-stepped mast suggests a roomier cabin interior, but the substitution of a large compression tube, for the keel-stepped mast, diminishes the "wide-open" concept considerably. A residual benefit is the muffling of mast chatter associated with a keel-stepped mast and perhaps one less place to leak if the mast boot is improperly fitted.

During our test sail, I ventured forward along the side deck and up onto the coach roof to the mast. With a freshening breeze heeling the yacht past 15 degrees, I found the journey uneventful. The deck is free of major obstacles, while the holding power of the moulded non-skid was sufficient to ensure my safety even when the deck was wet. And the distance from the raised coach roof to the side deck, although significant, even at our present angle of heel, was not as precarious as I had imagined.

Returning to the security of the cockpit I leaned against the contoured backrest supporting my lower back. (Shorter crew will enjoy the same comfort in their mid-back area.) Even with four adults lounging in the cockpit there was plenty of extra space left to accommodate others.

Venturing below decks while underway is always an adventure with the risk directly proportional to the angle of the heel. While not exactly a total klutz on a boat, I nevertheless seek the nearest legitimate handhold for the balance. Negotiating my way down the companionway stairs (the stairs are angled, providing a semblance of levelness as the yacht heels) I reached for a overhead rail handrail. There wasn't one. Too bad: I'd recommend installing an overhead rail through the main cabin passageway, from the head to the V berth.

The vessel's interior is richly appointed and the saloon contains teak-faced side cabinets and shelving with strip-teak battens lining the walls, all satin varnished. A teak and ash sole has been installed throughout. Dark blue upholstery with white dots contrasted with the cream-coloured ceiling panels and moulded white galley and chart table facings.

Centre stage, as one descends into this cavalcade of colour, is the horse-shoe-shaped galley. Twin moulded sinks and a single dry locker stall are fitted forward of the gimbaled Force 10 stove/oven combo. All galley plumbing is easily accessible for maintenance, below the sink. Enough pantry space and shelving is provided above the stove behind plastic sliding doors to accommodate most culinary supplies.

Across the passageway to starboard sits the chart table/refrigerator combo. While not a new concept, the design is a good feature on a boat with limited space. While I've never been impressed with a "split" galley, there is no denying the utility of this system. One minor irritation is the lack of what I term "cleaning slots" around the galley top perimeter. Cleaning the top is much easier if the fiddle design incorporates breaks or slots so the assorted crumbs are easily captured. If your next yacht purchase is missing these essential slots, ask the salesperson to throw in a battery-operated vacuum to deal with the problem!

Boasting accommodation for seven, I found the design had comfortable sleeping quarters. With standing headroom featured in the V-berth area, and a folding door to ensure privacy (though the folding door restricted traffic flow from behind the dinette table, when latched open) the spacious V-berth area can justifiably be called a separate cabin. Plenty of drawer space and a hanging locker are built into the surrounding cabinetry. Ventilation is good, provided by a large opening hatch.

The aft cabin, located behind the galley, is comfortable and surprisingly large, accommodating two consenting adults with ease. The first batch of CS 34s came out of the moulds without any ventilation ports, a problem quickly rectified with the addition of twin ports opening to the cockpit. A hanging locker is available, and ample shelving has been provided for storage.

Both the stuffing box compartment and the vessel's battery storage area, as well as side access to the engine, are reached from the aft cabin.

The 34 features a nicely appointed head ensemble to starboard, aft of the chart table. After a night's sleep at the dock -- or during watch -- the separate moulded shower stall, with the third hanging locker also houses the vessel's hot water tank, a clever use of space generally allocated to a cockpit locker.

Engine compartment space is at a premium. Some components, like the stuffing box and batteries, are easy to reach, while a simple oil change will require a certain amount of acrobatic dexterity to complete. Recently an inspection port, accessible from the head, was added to assist in engine maintenance.

One area in which the CS 34 is not limited is ventilation. I like plenty of easily controlled ventilation in a design. Fourteen opening ports, including hatches, are available, providing lots of fresh air in the cabin area. As well, an abundance of natural light filters through the ports, creating an open-air atmosphere belowdeck.

At night artificial light is generated by the twin 12-volt ship's batteries, while a separate deep-cycle battery cranks the 18-hp two-cylinder Yanmar diesel. (Originally the design featured a Universal diesel.) An optional 28-hp Yanmar is available. I would opt for the extra horsepower if I intended to sail offshore or down the ICW to Florida and beyond.

Our test sail took place off Port Credit on Lake Ontario. A freshening 15 knotter soon had us humming along in great style. She's a delightful sailer. All I needed was fingertip control upwind to keep her on a steady course.

Sail Inventory

We raced along under full main and 135 percent genoas (the North Sails inventory is stock equipment with the sailaway price). We found the yacht, under our present conditions, sailed better with a reefed main. The platform quickly gained less heel, and speed remained constant. The yacht maintained momentum through a tack and quickly regained speed.

The yacht is built for performance cruising with an eye on the race course. With her comfortable layout and ease of handling she should (as CS planned) appeal to second owners moving up (suffering from footitis), and new inductees to our sport. Certainly the combination of price, 65 standard features and the transferable hull warranty package makes for an enticing proposition indeed.

Originally published in Canadian Yachting's February 1991 Issue.

Specifications

LOA 33 ft. 6in.

LWL 27 ft. 8 in.

Beam 11 ft. 3 in.

Draft 4 ft. 6 in. (shoal/wing)

Weight 10,500 lbs

 

 

Destinations

  • Prev
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...
If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you ...
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...
Vancouver-based Big Blue Yacht Charters Worldwide owner Emma Murdoch explains that luxury crewed ...


Rideau Canal Cruise

By Andy Adams, Greg Nicoll and John Armstrong with Robin Ball

If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you have, a vacation aboard a Le Boat Horizon 1350 can give you a whole new view of this magnificent waterway.

One of the greatest engineering feats of the 19th century, the Rideau Canal is the oldest continuously-operated canal system in North America. Traveling this sheltered waterway aboard Le Boat, we were able to relax and take in the spectacular nature, picturesque towns and historic locks of this UNESCO World Heritage Site.

Read more about the Le Boat Rideau Canal Cruise...

 

Lifestyle

  • Prev
John Booth, who passed away just a few weeks ago was one of the most amazingly gifted and ...
We left Vero Beach on Saturday morning with Alicia, a boat from Sweden, following close behind. The ...
At the end of last month, Canadian sailors gathered on the Palma Beach in Palma de Mallorca, Spain ...
In 2019, C-TOW celebrates its 35th anniversary of providing 24/7 “Peace of Mind Boating” for ...
West Vancouver Yacht Club reports that following an independent certification process the Georgia ...
It has been hot in the Abacos this winter. Whoever said this area was cool this time of year must ...
Unfortunately this is not a picture from a boat but was taken on the evening of February 27, 2019 ...
On March 1, Tom Ramshaw of Stoney Lake Yacht Club was honoured with the most prestigious National ...
Vero Beach, aka Velcro Beach, lived up to its reputation again. Our original plan was to be there ...
My husband and I were visiting the Bra d'Or Lake from Newfoundland in our 39 foot Sea Ray ...

Swift Trawler 47By Andy Adams

You might look at the pictures of the new Beneteau Swift Trawler 47 and think that this is not a “performance boat”, but I think it certainly is, and here is why; it can top out at 30 mph to get you from A to B quickly or to beat the weather in, so it’s pretty fast, but it can also loaf along doing 1,250 rpm making 9.3 mph and at that pace, it travels 2.4 miles on a gallon of fuel. That’s great performance in my books!

With a light displacement of almost 28,000 lbs, this is a big boat. In fact, it looks and feels more like a small ship than a big boat.

Read more about the Swift Trawler 47......

 

Beneteau Oceanis 46.1By Andy Adams and John Armstrong

Beneteau Oceanis 46.1When Beneteau introduced their new Oceanis 46.1, they were inspired by the fact that their previous Oceanis 45 was one of Beneteau’s best sellers and the new 46.1 had to be a clearly superior boat. The Oceanis range is about space and comfort for cruising while still delivering strong performance.

The yachting world has now recognized the Oceanis 46.1 as being just such a worthy successor. On January 19th, 2019, the Oceanis 46.1 won the highly regarded title of European Yacht of the Year in the “Family Cruiser” category.

Read More about the Oceanis 46.1......

DIY & How to

  • Prev
This time of year, great deals abound. That boat with the ‘for sale’ sign looks quite attractive. ...
For less than US$2,500, Jim Leshaw, a lawyer who lives and works in Key Biscayne, Florida, ...
Each spring, I tend to notice canvas. I wish it was because it’s been immaculately maintained and ...
I’ve had two emails over the past few weeks with a count-down to launch (47 days per the last ...
Last time we looked at making proper electrical connections – the tools, supplies and methods ...
Winter is a great time to look at some of the hidden spaces on your boat – to take stock of what is ...
When a boat is in the water, the bilge will often collect water that enters the boat from weather, ...
Recently I suggested doing an off-season (winter) project with a potential client, and my ...
A recent conversation with a fellow contractor got me thinking: With all of the information out ...
As the cold approaches, shrink-wrapping is a hot topic, and I’ve heard more than a few debates at ...

Dear Doris

Clarity Nicoll

I grew up in a sailing family. My mother comes from a long line of sailors, my dad works in the marine industry and my brother and I have travelled up and down the eastern coast racing with and against each other. Yet, somehow, I had fallen in love with a No,ON-sailor (please note, the use of capital letters).

I had tried to introduce Dustin to sailing with some success, however, with the fast-paced nature of racing, and experienced sailors always ready to lend a hand when someone yelled “pull the cunningham!!!!”

Read more about Clarity Nicoll...

 

  

Marine Products

  • Prev
Yikes! No boat refrigeration? You’ve Got to be Kidding me!! But then again, true campers don’t use ...
The Walker Bay Venture 14 claims to be the world’s first luxury Explorer Sport Tender. It is ...
Mercury Marine is pleased to announce the launch of the new MerCruiser V8 6.2L 370hp Jet Ready ...
My history with the Cayenne goes back many years, as I was at the launch of the original vehicle ...
Last month, Mercury Marine has announced the launch of the 400hp Verado outboard engine, the ...
Featuring advanced, intuitive 3D controls, Zipwake Dynamic Trim Control Systems deliver a more ...
Gina de Vere approached me at the Canadian Yachting booth at this year’s Vancouver International ...
A revolutionary “assisted docking” system that provides a glimpse into the future of boating ...
After developing the Figaro Beneteau 3, the first production foiling sailing yacht, Groupe Beneteau ...
You most likely operate your vessel with batteries that are rechargeable. Rechargeable batteries ...