Corvette250B"She was a good little boat from day one," said George Cuthbertson of the Corvette, which he designed back in 1965. In those pre-IOR days, boats designed to the Cruising Club of America (CCA) rule were in vogue. The rule favoured heavy displacement and shoal draft, and produced family cruisers that were also adept on the race course. Ian Morch, owner of the Belleville Marine Yard, wanted to build a boat with shoal draft which would be in demand in the Bay of Quinte, and perhaps further a field in Montreal and Chesapeake Bay. He commissioned Cuthbertson and Cassian (C&C) Limited to come up with a suitable design.

Design hull no. 65-3 (the third project started in 1965), was named after the most famous Canadian World War II class of convoy escorts, the Corvette. Morch quickly put the boat into production. Hull no. 1, Victoria, was delivered to Toronto's John Hilton in the spring of 1966. The Corvettes continued in production until 1971. Altogether 167 vessels were built. There were some large yearly production runs; 41 boats were built in 1968/69, and 52 in 1969/70. The original base price was $12,500.

Electra II (now Temeraire, lying in Belleville), hull no. 34, was trucked to Florida for the 1968 SORC series. Ian Morch skippered, with George Cuthbertson, boat-builder George Hinterhoeller, designer Bruce Kirby, and the owner, Gordon Stonehouse, as crew. The boat had been sailed only once when they started the Lipton Cup Race held off Miami, but they finished first in Class D and 24th in a fleet of more than 100 yachts.

That same year in the 184-mile Miami-Nassau race Electra II finished second overall in the fleet, and first in Class D. Her third and final race of that series was the Governor's Cup, a wind-ward-leeward course, sailed off Nassau in 25-knot winds, Electra II placed fifth in her class, boat for boat, beating vessels five feet longer. Her CCA rating was 25.5, and was, in Ian Morch's opinion, "just a little on the heavy side for a Corvette". Still, her SORC performance was an astonishing success for a boat just 32-feet long.

Today the Corvette can only be described as traditional, with her relatively narrow beam, long overhangs and graceful sheer. The deckhouse is of moderate size, well in keeping with this style of vessel. The mainsail and fore triangle are of equal area, a moderate 444 sq. ft. on a vessel displacing 8,545 lbs.

Many buyers were attracted to this design because of the shoal draft (3 ft. 3 in. with the board up) and long keel. The centreboard trunk is in the keel and does not intrude into the accommodations above the floorboards.

The decks are wide, with outboard shrouds, and the foredeck is large. The cockpit is eight feet long, with straight benches, and the tiller sprouts from the cockpit sole.

The boat is well ballasted, carrying 4,000 lbs. of bolted-on lead just forward of the centreboard. The external ballast is well placed to absorb the hard knock of grounding in the shoal waters she was designed to sail.

All the Corvettes were built with the Universal Atomic 4 gasoline engine with direct drive as auxiliary power. Some owners converted to diesel; others installed a reduction gear on the Atomic 4, and increased the propeller diameter on a slower turning shaft to get a bit more push out of the engine.

The Corvettes were built with a balsa-core deck in the early days of fibreglass/core technology. Some owners complain of rotting core material because of inadequate backing pieces and sealing. But they also note that because the hulls were not lined, it is an easy job to cut out the glass and core from below decks. The offending material is replaced with foam core and epoxy, or, in the way of bolted on equipment or stanchions, backing pieces. Many owners are finding that after twenty years the ferrous centreboards must be removed for cleaning and anti-rust painting. Also the pins and pennant need replacing.

Bill Nichols, nine-year owner of Cadenza (no. 75), and formerly a keen racer in Lake Ontario's LORC series, says the boat was great fun on short courses in white-sails-only racing. However, he adds that when the boat is pushed hard in brisk winds on a broad reach, the shallow rudder will lose control, making broaches a common occurrence.

Most Corvettes are now well-loved cruising boats, with many owners trailering to places like Georgian and the Chesapeake Bay for summer cruises. Tom Liban sailed Saelith (no. 96) to the Bahamas and further south for a two-year sunshine cruise.

Though the boats were well-built and seaworthy, the Corvette's interior was spartan. The condition, equipment and level of comfort of used Corvettes are greatly dependent on the maintenance and upgrades done by previous owners. However, they are fine sailers, are trailerable (requiring wide-load permission in the daytime only), and provide great value for a couple or a small family seeking a mid-sized cruising boat.

Specifications

LOA 31 ft. 2 1/2 in.

LWL 22 ft. 6 in.

Beam 9 ft. 1 1/4 in.

Draft (board up) 3 ft. 3 in.

Draft (board down) 7 ft.

Ballast 4,000 lbs.

Displacement 8,545 lbs.

Sail Area 444.25 sq. ft.

To see if this boat is available, go to www.boatcan.com for listings!

Lifestyle

  • Prev
This line-up of Beneteaus can to us from our friends at RCR Yachts in NY State where they are ...
As another harsh Victoria winter came to a close, the deck repair and refinishing continued with ...
The Peterborough Canoe Company was formed in 1892 and began production the following year after ...
On one of the sunny days we had recently, Kyle MacTaggart in Honey Harbour ON fired up the Merc to ...
For all those OnBoard subscribers who have followed along with the maintenance, repairs and ...
We hardly need tell you about the pandemic but it’s worth noting that the marine industry is acting ...
If you’ve been to CORK, you’ve probably seen Tim Irwin. Whether he was organizing volunteers, ...
This brilliant shot comes to us from professional shooter Elle Bruce.  These four sailors are ...
In 2008, Pat and Lynn Lortie said goodbye to their everyday life to pursue their dream; making ...
With old boats every repair seems to uncover something else needing attention.  Removing the ...

DIY & How to

  • Prev
Building on our last two editions (Sealants, and Fibreglass, respectively), Gelcoat is the next ...
After a successful R2Ak and regatta season in 2019, I felt that Pitoraq was due for a major ...
Pause for a moment and ponder this question. How much is your life and your safety at sea worth? ...
Last edition we talked about sealants to perform tasks like bedding and sealing. Other tasks like ...
Over the winter, a many-thousand pound fiberglass, wood or metal shell is held in position by only ...
Since the late 19th century, a debate has raged on the relative merits of diesel fuel over ...
This bag does more than hold your anchor and rode in one tidy little pile. After you’ve anchored ...
Purchase your copy of the BRAND NEW Ports Georgian Bay 2020 Edition at the Toronto International ...
The boat was put on the hard for this winter and were going to follow along with Graham as he ...
In this part, we’ll delve deeper into the other parts of the boat found below the water line: the ...

Shrink Wrap2020 is a year of change – self-isolation, social distancing, quarantine, and working remotely have become the norm. For many, this has been a bitter pill to swallow. Another bitter pill for boaters is the delay of the season. Provincial laws differ – so terms like ‘essential’ aren’t translating widely across the marine world.

In BC, marinas remain open and fuel is available, sometimes with conditions. In Ontario, marinas, boat launches, yacht clubs and the professionals that service the marine industry aren’t considered essential, unless the service and location allows a person to access their permanent residence only accessible by boat.

Read more about Boating in 2020........................

 

  

CY Virtual Video Boat Tours

Virtual Boat ToursWe all love boats and nothing can break us up! So, what better way to spend our time than looking at interesting boats and going aboard in a virtual ride or tour. We have asked our friends at various dealers and manufacturers to help us assemble a one-stop online resource to experience some of the most interesting boats on the market today. Where the CY Team has done a review, we connect you to that expert viewpoint. Our Virtual Show will continue to grow so visit frequently and check it out. If you can’t go boating, you can almost experience the thrill via your screen. Not quite the same, but we hope you enjoy our fine tour collection.

 

Read more about the CY Virtual Boat Tours....................

Destinations

  • Prev
If you have four hours to enjoy a fine tour of one of Canada’s most interesting waterways (let’s ...
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...

KingstonBy Amy Hogue

Cruise into the city of Kingston, Ontario, and it will quickly become clear that this city and surrounding waterways have something special. Built around the northern shore of Lake Ontario, Kingston is the place to go if you love to explore new waterways, fantastic views, and exceptional boating opportunities.

Sitting at the intersection of three world-class Canadian bodies of water, Lake Ontario, the St. Lawrence River, and the UNESCO World Heritage Site, the Rideau Canal (Cataraqui River from Kingston to Newboro), the water’s influence is deeply woven into Kingston’s culture and history. 

Read more about Kingston...........

 

Marine Products

  • Prev
Since its introduction last year, the JBL by Harman Marine BassPro 10" Powered Subwoofer (JBLMBP10) ...
Ever since I was a youngster Jeeps of all kinds have fascinated me. It wasn’t until the mid 70s ...
New from Plastimo, this bi-colour backpack in Tarpaulin 500D will keep contents dry from ship to ...
Being a boater can come with certain space restraints for additional items that may make your ...
Whether you are interested in monitoring your vessel’s systems while underway or remotely from your ...
No wires to install down your mast. Transmit to smartphone/tablet. Works with lots of great ...
Vesper Cortex, the advanced multi-station VHF, AIS, monitor with intuitive touchscreen operation is ...
The Handy One Combo is an all-powerful, hands-free lighting solution. It's tough, reliable, ...
The Nebo FIXR features an easy, portable solution for all your everyday tools.
Thru hulls are fantastic for helping you evacuate unwanted water from your hull.  The Dripper ...