CCRS25250BBy Graham Jones

C&C International's entry into the sport boat sweepstakes is the SR 25 - a slick, sleek 25-footer that expands this builders growing stable of single-purpose, strictly-racing fillies. Following a successful regatta debut at last years Key West Race Week, the SR 25 officially became the fastest monohull for its size built on Canadian shores. And so when C&C's sales manager, Rob Maclachlan, offered CY his demo-boat to race in a local weekend regatta, our staff began to drool over their keyboards in anticipation. The event was Cornucopia, an annual 75-boat PHRF and one design regatta, hosted over the Labour Day weekend by the friendly folks at the Dalhousie Yacht Club in St. Catherines, Ontario. This would be the ideal venue to put our magazine staff and this tricked-out rocket to the test. Real life. Real sailing. Real review, so to speak. Now the only matter left to resolve was, "Who would steer?"

The day before our regatta review, Team Canadian Yachting met with Maclachlan and C&C President, Anthony Koo, at the Niagara-on-the-Lake Sailing Club. Our plan was to rig the SR in preparation for the delivery to St. Kits that afternoon. At the same time, our crew would hopefully glean a few last-minute go-fast tidbits from the experts. The only advice we received, however, was "sail it like a dinghy."

And at just over 1,900 pounds that just about sums it up, for the SR is a 25-foot dinghy. Like the other sport boats in its size range (the Melges 24, for example), this single-purpose design brings together exhilarating off wind performance, light weight, a stripped interior, simplified sail handling and trimming systems, trailerability and a no-compromise, no-holds-barred, strictly racing philosophy. The line drawings rendered by C&C's designer at large, Glen Henderson, show a fine bow section as well as razor-sharp, low-drag foil sections on the rudder and a lifting bulb keel. Other conspicuous features of the 25 are a wide and open transom, a vast, shallow cockpit, pronounced hull flare aft of the primaries, spinnaker sheets that lead under the deck, a twin-spreader 7/8ths rig, and the choice of either an almost-masthead symmetrical spinnaker or an asymmetrical, flown from a retractable bow-sprit.

The technically-inclined will be interested to know that the SR is constructed using C&C's proprietary resin infusion system in which all the elements of the laminate schedule, including the balsa core, are applied to the mould in a dry state following the application of the gel coat. In the next step of the process, the entire hull is sealed in plastic and subjected to vacuum pressure, which draws a carefully-monitored dose of resin through the fiberglass. This process controls fiberglass-to-resin ratios, promotes a void-free laminate and, in theory, produces a stiffer, stronger hull for a given weight.

With all this emphasis placed on a light, stiff hull for speeds sake, one might expect that the SR would sport a fairly large spread of sail. Yet with a sail area of 275 sq ft, the sail plan on the SR 25 is anything but radical ñ moderate is probably a better word. Even with a sail plan that is over 50 sq ft smaller than that of the J-80, the SR 25 is billed as an all-round performer. Designer Henderson explains his approach. "Generally, sport-boats receive ratings based on their ability to plane off the wind in a fresh breeze. Unfortunately, these handicaps are often tough to race with in light to medium airs. And since we spend most of our time sailing in these conditions, this is one of our boat's strong suits."

While the knee-jerk reaction to boost light air performance is to stack-on more sail area in an effort improve a boat's sail area-to-displacement ratio, Henderson approaches this problem by looking below the waterline, not above the boom. To ensure light air zip with a moderate sail plan, the SR bow has a sharp entry, the hull is narrow and therefore easily driven, and the wetted surface area is so low it barely gets wet.

But does the SR live up to the promises of its designer and C&C's earnest salesmen? To give the boat a fighting chance on the water, and also to ensure that our publisher, Cam MacDonald, and I would not hurt ourselves at mark roundings, we recruited a few smart-bodies to help pull the strings. Two ex-national team members who made sure that we were heading to the right side of the course, and who also made a significant contribution to this review filled out the crew of Team Canadian Yachting.

As Cam attended the skipper's meeting and tried to establish our PHRF rating (a preliminary figure of 120 seconds a mile with a symmetrical spinnaker), we looked over the layout of our steed. Our crew observed that C&C has not cut-corners in the hardware department, and all the equipment on the SR is top-notch and appropriately sized. Key components include Harken two-speed primaries, a Harken traveller, Spinlock sheet stoppers on the dog-house, as well as Harken control blocks. Composite Spectra halyards and spinnaker sheets are also standard.

All of this equipment defines the SR 25 as a turn-key racer, for this speedster is ready to race out of the box, and will not require any further finishing or fairing once it leaves the C&C shop - a relief to those who want to race at a high level but cant afford the time it takes to tweak most PHRF boats for maximum performance. We were also pleased to see that the builder has set up the backstay and vang with powerful purchases that provide the crew with two-finger control in any conditions. This said, some of our crew balked at some of the hardware positioning on the factory boat. I agree that in leading the SR traveler, the backstay, and mainsheet fine-tune to the helmsperson, this crew member is burdened with too much to do in addition to his or her steering duties. We concluded that the backstay and traveler should remain back with the mainsail trimmer/tactician who sits behind the helmsperson at the back of the bus. Driving was a full-time job and therefore the mainsheet controls, with the possible exception of the fine-tune, should be left to the sail trimmers. Our headsail trimmer made another valid comment about the oversize adjustable Genoa lead cars, observing that they looked more suited to the layout of a J/35. We suggested that C&C replace the cars with a simple track and spend the money saved on a compass. C&C says that our beefs about the ergonomics of the main controls will be addressed in future boats.

On the way out to the race course, we gawked at some of the other well-conceived features of the SR. Molded foot braces that permit the crew to sit comfortably when the boat is heeled, for example, span the cockpit floor. Similar braces exist up on the bow so that the foredeck does not go for a swim in the middle of a gibe.

There is not much to observe about the SR below-decks as the cabin is virtually empty, apart from a token stove and sink. There are a vee-berth and two quarter berths down there, but the folks at C&C can't properly call this boat an overnighter - without their fingers crossed behind their backs. For one, the needle-nose shape of the bow cramps the forward vee berth so much it is just large enough for a spinnaker bag and a single crew - any more than that and things would be very squishy. Something that would warm up the Spartan interior of the 25, however, would be the addition of a wood or fiberglass bin for keys, wallets, race instructions and sunscreen.

One of the most innovative features of the SR 25 is a lifting keel, which is raised and lowered in its trunk using a small trailer winch. With the keel wound up, the boat draws 16 inches -- barely more than a loaded canoe. The rudder, which lies slightly inboard from the transom for improved control, will also lift out of a cassette-style slot for trailering.

Our start at Cornucopia was very typical of Great Lakes PHRF fleets consisting of a mixed bag of racer/cruisers ranging from a One Tonner, to a Frers 36, an Andrews 30, a Kirby 30 and a C&C 38. With the exception of the One Ton, these boats fell within a 30 second-a-mile rating band -- an acceptable (if not ideal) range for fair racing in PHRF. At the start, we tacked at the boat end and ghosted away on port in search of more pressure inshore. While I won't bore you with a tack-by-tack account of our racing, I can say that by the windward mark I was in awe of the SR 25's light air jets.

Even in the two- to four-knot conditions, we were able to tack the SR extremely fast. In fact, we lost very little boat speed coming out of our first tack, and rapidly accelerated again into top-gear -- our five person, 1,000 pound crew notwithstanding. As we tacked again to consolidate our position, Cam observed that the SR felt more like a dinghy than the Lightnings he grew up in. Indeed, roll-tacking this boat in light-air is key.

During one of our looser tacks, we swung the SR so hard that it nearly dumped the crew in the water to leeward. Moments later, as we sailed though the lee of an Andrews 30, our helmsman piped up, "This thing is a treat to steer." From my spot back at the main traveler, I also concluded that the SR points very high for a boat of its size. During the second windward leg, the breeze built to five knots. Sensing that we were not flat enough, our helmsman called for some weight and three of our crew dutifully slid out to weather. Hiking in five knots? So what will this machine be like in 20?

Our 20-knot test-wind arrived on cue for the Sunday race. In this growing breeze, we sailed with all bods parked squarely on the hull-deck joint. Our main was set with the traveler all the way to leeward and we flew a Dacron blade jib sheeted to inboard tracks. Even in the 18-22 knot breeze that afternoon, the 25 had all kinds of power to punch through the waves. This is not something that you would expect from a light 25-footer, but we still held our own against many of the larger boats in our class. Surprisingly, we even stayed reasonably dry in the moderate waves while we worked the boat upwind. The SR showed no signs of hobby-horsing in the bumps, and was easy to steer, with a wide groove -- just as it had been the day before.

When we turned the top mark and ran off-wind, this Glen Henderson design remained a stable as an aircraft carrier. And while other boats broached violently around us, we avoided the foul-ups, surfing from tough-to-trough. As our confidence built, we began to experiment with our gibe and heel angles and concluded that the 25 felt quickest with a bit of windward heel.

Our learning curve over the weekend was steep, but once we figured how to tweak this sport-boat, we were able to sail to our rating and placed with consistent, if conservative 2, 3, 3 finishes. And although we never won a race, our steady placing lead to an overall fleet win. This suggests that the SR is a strong all-round PHRF performer in winds from a puff to a blast. And at $43,000 (ex. sails, trailer and outboard) C&C's latest can't be beat for knots-per-dollar.

Originally published in Canadian Yachting's Winter 1996 issue.

Specifications

LOA 25ft. 5in.

LWL 21 ft.

Beam 8 ft. 6in.

Draft (up) 5 ft. 5in.

Displacement 1,960 lbs.

Sail Area 275 sq. ft.

 

Lifestyle

  • Prev
I've been cleaning dresser drawers for space and came across this 1979 LYRA t-shirt. This was my ...
Our Photo of the Week comes from one of our CY team members who writes “This is my son and his best ...
This boat carries the distinction as the last boat to leave the C&C Custom shop in Oakville ...
We crossed Lake Ontario from Oswego with a minimum of fuss and did a little happy dance when we ...
Our Photo of the Week comes from Mark and Lisa Harris who winter in Vancouver, Washington and spend ...
I am new to boating. Bought a 2019 Ranger Tug in April followed by taking a short boating course ...
Arie and Maribeth sent us this photo from their honeymoon departing Killarney…I think they were in ...
This shot was taken last week by Jessica Lee, a freelance photography pro, Albacore racer and part ...
On a sunny and windless day we led Alicia and another sailboat into New York Harbour. There were ...
It was a trip 2 or 3 years ago, and all 4 boats traveled up to the Killarney area in a ...

DIY & How to

  • Prev
I’ve lost count of the number of times I’ve told my children to wash their hands. I remind them ...
The new editions of PORTS Cruising Guides, from the publishers of Canadian Yachting will be ...
As the seasons change and we move from warm summer into cooler fall, many fanatic boaters ...
On the Friday before a weekend with a gorgeous forecast, I heard on the news that a boat had ...
A reader suggested we take a look at anchors. Anchoring seems simple enough. A weighted hook with a ...
If you’ve spent any time in a boat yard during spring commissioning season, you won’t find it out ...
As a busy marine mechanic, I tend to have the same or similar conversations often, and they’re ...
This time of year, great deals abound. That boat with the ‘for sale’ sign looks quite attractive. ...
For less than US$2,500, Jim Leshaw, a lawyer who lives and works in Key Biscayne, Florida, ...
Each spring, I tend to notice canvas. I wish it was because it’s been immaculately maintained and ...

CompassBy Katherine Stone

Not a hard re-installation - just line up the holes and replace the screws.

I remember vividly my first experience using a chart plotter and navigation system. Deciding that we should try the cruising lifestyle, we purchased an older boat and set out from Hindson’s Marina in Penetanguishene at dawn to sail across Nottawasaga Bay to Thornbury, Ontario for the Canada Day long weekend. It was a beautiful start to the day when we left and motored out of Penetanguishene Bay and rounded the corner, heading toward Christian Island, right into pitch black clouds. 

Read more about Your Compass........................

 

  

J99By Katherine Stone

All set to pull out the Code 0 before dousing the jib.

It was a very cold and wet beginning to the summer and we never thought it would arrive in Southern Ontario. Doing a 100 miler race on Lake Ontario (billed as the COOLEST race on the lake) with my 8 layers of thermal clothing, woolen ski toque and ski mittens, along with a neck warmer kept me on the edge all night, just out of frostbite reach. I shouldn’t have complained, as we also had wind!

July and August arrived, and it has certainly warmed up, in fact, its too warm, AND we don’t have wind. We are now counting 5 Wednesday nights in a row without wind to race. 

Read more about the J99 Offshore Shorthand Speeder.....................

 

Wellcraft 242 FishermanBy Andy Adams

Boat buyers are gravitating to the latest centre console boats for a wide range of reasons but for the Wellcraft 242 Fisherman, you can sum it up by saying it’s about features, style and value.

This great-looking boat is just as capable on a family picnic cruise as it is doing serious blue water fishing. A wide range of options let the buyer tailor the boat for their specific interests, but it’s all there to choose from. Our test boat was well-equipped for that comfortable cruise with easy access via the swim platform and through the transom gate into the cockpit.

Read More about the Wellcraft 242 Fisherman..................

Destinations

  • Prev
Boom & Batten Restaurant is suspended over the water adjacent to the Songhees Walkway and ...
Provincial Boat Havens are those special places to drop anchor in British Columbia’s West Coast and ...
NW Explorations, a Bellingham, Washington-based yacht charter, brokerage, and marine services ...
If you haven’t cruised the Rideau Canal before, you have missed a special treat and even if you ...
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...

KingstonBy Amy Hogue

Cruise into the city of Kingston, Ontario, and it will quickly become clear that this city and surrounding waterways have something special. Built around the northern shore of Lake Ontario, Kingston is the place to go if you love to explore new waterways, fantastic views, and exceptional boating opportunities.

Sitting at the intersection of three world-class Canadian bodies of water, Lake Ontario, the St. Lawrence River, and the UNESCO World Heritage Site, the Rideau Canal (Cataraqui River from Kingston to Newboro), the water’s influence is deeply woven into Kingston’s culture and history. 

Read more about Kingston......................

 

Marine Products

  • Prev
The new edition of PORTS Cruising Guides: Georgian Bay, Lake Huron & the North Channel from the ...
Canadian Yachting’s Chartering Handbook, full of information and advice for heading off to a ...
Navigating the process of yacht care and maintenance just got a whole lot easier, following the ...
I will be honest, I am generally not a big fan of Sport Utility Vehicles (SUV). My wife and I own ...
The FX model is Yamaha's top-of-the-line three seater WaveRunner and a totally new model for 2019. ...
In the April 2015 edition of CY magazine, I published an article on anchors and anchoring – Staying ...
The Seabin device part of the Oak Bay Marine Group trial, has had promising results so far while ...
When I took the Mitsubishi Outlander PHEV down to Wednesday night racing, the people that came over ...
Protecting your boat from scratches and dents isn’t always easy. That’s why the Big Bumper Company ...
Rancho Santa Margarita, CA - Forespar has just introduced a new smaller size version of their ...