power-sea_sonic_270_centaur-largePower and elegance has always been a winning combination when it comes to building a boat that people will walk down the dock to take a second look at. This is exactly what British Columbian craftsman, Chris Casparis, has achieved with the 28-foot, Sea Sonic Centaur – a boat that people actually do walk down the dock to see and take pictures of at boat shows and launch ramps around Okanagan Lake.

The Centaur looks like it was built in another era. It's cold-molded, plywood-on-frame construction allows it to have beautiful flowing lines with few sharp angles. Casparis, who learned the art of fine woodworking and boat building in Switzerland before immigrating to BC's southern interior, has ensured that the boat's lines – from its shear -to the innovative sliding hatch for the cuddy – curve and gently bend defying common joinery techniques.

Despite the fact that the Centaur's construction techniques and materials are the most modern available, wooden boat purists will love this craft for the way it is finished.

What strikes you most is its overall appearance, which threatens to become an almost 1950s retro look. The forward sections of the semi-displacement hull are rendered white, while the shear line, aft stations and transom are bright finished mahogany.

The deck is laid-up by framing lightly stained mahogany strips, separated by blond Canadian maple dividers, with mahogany planking stained a richer red. The hull-deck joint is more of a confluence of wood than a hard edge.

Thematically, the use of wood carries on into the cockpit, but doesn't become overbearing. The cockpit is graced with a flip-up bolster seat for two and a circular settee where guests can stretch out to enjoy their day out on the water without feeling like they're missing any of the fun. These are upholstered in white leatherette to provide a comfortable place to sit and they also give the eye some relief from too much wood.

Sun worshippers have not been forgotten either. A large cushioned sun deck (which hides the boat's engine room) has been placed aft of the cockpit on the back deck.

A wet bar on the port side of the cockpit ensures that all the necessities of life are available including a discreetly placed Clarion sound system that provides music throughout the cockpit.

Where some boat manufacturers simply stick on a swim platform that looks more like an afterthought than a planned appendage, the Centaur's transom features a molded platform with a step leading to the aft deck.

For skiers and wake-boarders, there is a towing eye and hide-away boarding ladder incorporated into the transom and swim platform. Neither is so in-your-face macho as to disturb the efforts Casparis has put into shaping the stern of his boat.

Driving the Centaur is a pleasure. The chrome-finished instruments are set into a mahogany dashboard. The dual instruments (this is a twin-engine boat) are all analog in keeping with the retro feel, but Casparis has wisely included a Raytheon digital speed log/depth sounder and it does not look amiss with the other equipment.

Interestingly, the wheel is a composite (graphite), which provides some relief again from the intensity of too much wood.

Deck hardware is all custom. Casparis has designed each disappearing cleat and chock to fit with the look of the boat. They are first cast in bronze, then chromed and mounted with epoxy and through deck fasteners.

Casparis took his influence for this exquisite luxury runabout from the great mahogany craft, like the Riva, which ply the southern European waters of Venice and Lake Geneva.

Going back to the idea that this boat would not look out of place on the Grand Canal, its construction is as up-to-date as can be.

The hull framing consists of fab'ed up longitudinal members – like the engineered beams now used in housing construction – laminated in place on a frame of solid wood ribbing. This gives the frame a strength that solid plank construction cannot offer.

Sheeting on the hull is a double thickness of mahogany ply sandwiching a layer of Kevlar cloth between the inner and outer skins. The skins and Kevlar cloth are laminated with a high strength epoxy and once the shaping and sanding are finished the entire hull is sealed in epoxy. This ensures that, unlike many other wooden boats, the Centaur will never suffer from dry rot or water damage.

Modern design thought saw production manufacturers shift to planing hulls. The reason was simple – less energy expended for more speed. Sounds good, but there were some sacrifices that had to be made, like poorer performance and a rougher ride in heavier sea conditions.

The Centaur's semi-displacement hull gives passengers a smoother experience in big waves because it cuts through them and does not skip from crest to crest.

Still, in calmer waters, where a lot of the fun of boating is in going fast, the Centaur performs admirably by picking up its skirts and getting up on plane in 8.3 seconds and hitting her top end of 68 mph in 14 seconds.

Okay, it is not as fast as an offshore look-alike, but the comfort of the ride goes a long way to offsetting the speed.

To power the test boat, Sea Sonic dropped tandem 496 HO MerCruisers in and coupled them with two Velvet Hydraulic Drive transmissions driving a set of 15-inch bronze props.

The exceptionally quiet engines are on separate throttles and the driver must keep an eye on the tachometer and listen to their pitch to keep them balanced. Like a Ferrari, this is a driver's boat rather than a high-powered Chrysler family sedan; it requires skill and concentration to get the most out of it.

Putting it through its paces, the Centaur's dual rudders glided it gracefully through a set of tight turns at medium speeds and did not skid through them at higher speeds like a planing hull would.

Calling the boat a runabout is a misnomer. It has a fairly heavy hull and does not tow all that easily without a powerful tow vehicle. Still, once it is in the water, it is a joy to look at and drive.

Suffice to say, there are reproduction boats around, recalling the heyday of wooden runabouts, which try to pick up on the market for those who truly love wooden boats, but not since the legendary Vic Carpenter hung up his plane and square has anyone in North America produced anything coming close to this machine.

By Bruce Kemp

To see if this boat is available, go to www.boatcan.com to check listings!

Destinations

  • Prev
At the 2019 Vancouver International Boat Show I had the pleasure of meeting up with Allyson and ...
Following the harsh impact of Hurricanes Irma and Maria, The British Virgin Islands is making an ...
For the adventurous boater Bunsby Marine Provincial Park is a special place, situated due south of ...
There is good anchoring in Cowichan Bay and nearby, and salt water enough to make any boater happy. ...
We’re gliding through green-blue waters, colours so vivid and bright they hurt your eyes. We’re set ...
The Halifax waterfront has been attracting more and more large yachts in recent years. However, a ...
Ah Canadian simplicity at its finest; small town, big marina. Little Hilton Beach (population ...
Vancouver-based Big Blue Yacht Charters Worldwide owner Emma Murdoch explains that luxury crewed ...
In the 1920s, a small cove in Canoe Bay was used as a shipping point and safe-haven for rum runners ...
Here’s an update from Caroline Swann with some news for the adventurous types who may be heading to ...


The Marina at Blind ChannelOne of my favourite places

By Marianne Scott

Sailing north of Desolation Sound, the Discovery Islands and the Broughton Archipelago offer cruisers a bevy islands with ample anchorages. Tides cause swift currents to run through the islands’ waterways. Few marinas are found in this large, sparsely populated region but one that provides all the services boaters need and especially enjoy is Blind Channel, a marina and resort operated by the Richter family located on Mayne Passage on the east side of West Thurlow Island (50 24. 82N, 125 30. 00).

Read more about the Blind Channel Resort...

 

Lifestyle

  • Prev
At the end of last month, Canadian sailors gathered on the Palma Beach in Palma de Mallorca, Spain ...
In 2019, C-TOW celebrates its 35th anniversary of providing 24/7 “Peace of Mind Boating” for ...
West Vancouver Yacht Club reports that following an independent certification process the Georgia ...
It has been hot in the Abacos this winter. Whoever said this area was cool this time of year must ...
Unfortunately this is not a picture from a boat but was taken on the evening of February 27, 2019 ...
On March 1, Tom Ramshaw of Stoney Lake Yacht Club was honoured with the most prestigious National ...
Vero Beach, aka Velcro Beach, lived up to its reputation again. Our original plan was to be there ...
My husband and I were visiting the Bra d'Or Lake from Newfoundland in our 39 foot Sea Ray ...
After an autumn in Canada, we arrived back in northern Florida at Adamant 1 on January 3rd and with ...
This issue, to kick off 2019, we have an unofficial Photo of the week and this, the unofficial ...

Swift Trawler 47By Andy Adams

You might look at the pictures of the new Beneteau Swift Trawler 47 and think that this is not a “performance boat”, but I think it certainly is, and here is why; it can top out at 30 mph to get you from A to B quickly or to beat the weather in, so it’s pretty fast, but it can also loaf along doing 1,250 rpm making 9.3 mph and at that pace, it travels 2.4 miles on a gallon of fuel. That’s great performance in my books!

With a light displacement of almost 28,000 lbs, this is a big boat. In fact, it looks and feels more like a small ship than a big boat.

Read more about the Swift Trawler 47......

 

Beneteau Oceanis 46.1By Andy Adams and John Armstrong

Beneteau Oceanis 46.1When Beneteau introduced their new Oceanis 46.1, they were inspired by the fact that their previous Oceanis 45 was one of Beneteau’s best sellers and the new 46.1 had to be a clearly superior boat. The Oceanis range is about space and comfort for cruising while still delivering strong performance.

The yachting world has now recognized the Oceanis 46.1 as being just such a worthy successor. On January 19th, 2019, the Oceanis 46.1 won the highly regarded title of European Yacht of the Year in the “Family Cruiser” category.

Read More about the Oceanis 46.1......

DIY & How to

  • Prev
I’ve had two emails over the past few weeks with a count-down to launch (47 days per the last ...
Electrical ground is a term used to describe the reference point in an electrical circuit from ...
Last time we looked at making proper electrical connections – the tools, supplies and methods ...
Winter is a great time to look at some of the hidden spaces on your boat – to take stock of what is ...
When a boat is in the water, the bilge will often collect water that enters the boat from weather, ...
Recently I suggested doing an off-season (winter) project with a potential client, and my ...
A recent conversation with a fellow contractor got me thinking: With all of the information out ...
As the cold approaches, shrink-wrapping is a hot topic, and I’ve heard more than a few debates at ...
Nothing stops a vacation faster than a problem with the fresh water system – be it leaks, smells, ...
Pyrotechnic distress flares have been around for decades, while electronic strobe distress flares ...

Sea to Sky SailingSea to Sky Sailing has just been approved as the only Royal Yachting Association (RYA) recognized training centre on the west coast of North America just in time to deliver an epic 2019 season!

“This transition from our previous International Yacht Training (IYT) certification to RYA is a huge benefit to our students as it provides them certification that is known globally as the gold standard for yacht training.  The RYA requires training centres to undergo annual inspections of their vessels, business practices and training delivery in order to maintain a strong standard and guarantee a high quality experience for students. 

Read More about Sea to Sky Sailing......

 

  

Marine Products

  • Prev
The Walker Bay Venture 14 claims to be the world’s first luxury Explorer Sport Tender. It is ...
Mercury Marine is pleased to announce the launch of the new MerCruiser V8 6.2L 370hp Jet Ready ...
My history with the Cayenne goes back many years, as I was at the launch of the original vehicle ...
Last month, Mercury Marine has announced the launch of the 400hp Verado outboard engine, the ...
Featuring advanced, intuitive 3D controls, Zipwake Dynamic Trim Control Systems deliver a more ...
Gina de Vere approached me at the Canadian Yachting booth at this year’s Vancouver International ...
A revolutionary “assisted docking” system that provides a glimpse into the future of boating ...
After developing the Figaro Beneteau 3, the first production foiling sailing yacht, Groupe Beneteau ...
You most likely operate your vessel with batteries that are rechargeable. Rechargeable batteries ...
This past decade has been a real up-and-down ride for the companies who make boating equipment. ...