May 10, 2017


Canadian Tire or marine store – which do I choose?

Question:

Can I buy generic automotive parts or products for my boat, or should they specify ‘marine’?

Andrew:

WaxesWith many products that people use on their boats, the answer is debatable (especially in the realm of cleaners and waxes), but there are two areas where you shouldn’t compromise: wiring and other components for installation in your engine compartment.

a display at Fogh Marine showing a variety of products - many with the words 'marine', and some without.

 

 

 

 

 

 

 



WiringWiring should be of a tinned-copper, in a marine grade: this ensures that not only will the conductor strong enough to resist fatigue from vibration and moisture, but also so that the shielding is temperature-rated to allow for the high temperatures of engine compartments. Be sure as well that the wiring is rated for the amperage that the conductor will carry.

'marine grade' tinned-copper wire , showing the temperature rating of the shielding.

Why worry? By using inferior grade wiring (which may still function correctly), there is risk of corrosion, damage due to vibration, risk of short circuits, and potentially the risk of conductor shielding melting or catching fire.

Ignition ProtectedItems for installation in the boat’s engine compartment (fuses, fuse blocks, circuit breakers, switches, starter motors, compressors, battery chargers, etc.) should be of ‘marine grade’ – more specifically, these items should be ‘ignition protected’ (meaning that they won’t ignite a surrounding air-fuel mixture if there is an explosion inside them, and they can’t reach a high enough surface temperature to generate enough spark to ignite an air-fuel mixture). Products that are ignition protected will be labeled as such or with the label ‘SAE J1171’. By using non-ignition protected devices near engines, fuel tanks and batteries, there is enhanced risk of damage, fire or even explosion!

showing 'ignition protected' wording in a battery charger.

In some areas, choosing products like cleaning products at CT or elsewhere that aren’t ‘marine grade’ can be cheaper and easier to find and to use – but compromising in wiring and ignition protection standards can compromise your safety and enjoyment.


Ask Andrew
Andrew McDonald is the owner of Lakeside Marine Services (www.lakesidemarineservices.ca)– a boat repair/maintenance firm based in Toronto. Andrew has worked in the marine industry for 12 years and is a graduate of the Georgian College ‘Mechanical Techniques - Marine Engine Mechanic’ program.

Got a question for Andrew? – Email This email address is being protected from spambots. You need JavaScript enabled to view it. with “ Ask Andrew” in the subject line.

 

 

 

Related Articles
The introduction of X-Yachts’Xc range in 2008 has proven itself to be something of a game changer within the industry – particularly among manufacturers designing cruiser/racers.
Once again, the designers at Jeanneau have ...
George H. Cuthbertson, aged 88, passed away on ...
Commodore’s Boats is a full service shipyard with ...
Monday, October 16 will be a very special day as ...
Toronto sailor and former RCYC coach/sailing ...

Destinations

  • Prev
Toronto sailor and former RCYC coach/sailing instructor Ryan May is now a US coast guard captain ...
Just before the weekly party at Shirley HeightsSunsail staffer Chris Donahue conducts our chart ...
Chartering in the Caribbean conjures up images of turquoise sea, palm fringed beaches and great ...
Since anyone who opens an independent bookstore is at least as brave as a small boat shop owner, I ...
You’re on your way east to the 1000 Islands or the Trent-Severn. By entering north of Prince ...
I have lived in Ontario my whole life but have only recently had the pleasure of visiting the City ...
My trip to the Northwest Passage started long before I boarded the flight to Kangerlussaq with ...
During the summer of 2016, my wife and I cruised through the North Channel in Lake Huron on our ...
It’s like we’ve waved a magic wand and disappeared into a picture perfect painting, our ...
The Schooner Cove Yacht Club is situated between Nanaimo and Parksville, on the east coast of ...

Cowichan Bay to Genoa Bay – Almost the Gulf Islands

Cowichan Bay to Genoa Bay – Almost the Gulf Islands

 By Catherine Dook

“So you’re going offshore to Genoa Bay,” said an old salt at coffee that morning. Genoa Bay was 15 minutes away from our homeport of Cowichan Bay and hardly counted as offshore, but it was our first destination that fall. The fog had socked us in all that morning, so John and I drank coffee and gossiped with the neighbours while waiting for the weather to lift. We’d provisioned with cans of chilli, a sack of apples, and tanks full of water. We’d tested the engine and the anchor winch. We were ready.

Read More of Cowichan Bay to Genoa Bay.....

 

 

 

Lifestyle

  • Prev
One of our most enthusiastic contributors, Rob Dunbar sent us this photo from Halifax.   ...
Checking back into the US was quick and painless. We made the call to Customs but we needed to ...
Two-hundred-year-old homes are what ghost stories are made of, and Beaconsfield Yacht Club (BYC) ...
This time our photos come from Gimli where Katie Coleman Nicoll was on the scene. She’s an ...
Recently we celebrated our country’s 150th anniversary, and in true form thousands of ...
   We left off Part 1 at the year 1914, and will here pick it back up, running through ...
This week’s POTW comes from across the pond. Who knew we had a European audience   ...
Here is our boat anchored at Hockey Stick Bay. We live in a beautiful country.     ...
Michelle Jacques of Cambridge ON share this memory of her adorable pooch. “This is Frodo. ...
  Our 150 year history began in 1867, but Canada was no stranger to watercraft prior to our ...

 By: Katherine Stone

Two-hundred-year-old homes are what ghost stories are made of, and Beaconsfield Yacht Club (BYC) has its fair share of both. Although no one has seen any apparitions, a former club restaurant manager swore she could feel a presence whenever she went down to the cellar to get supplies.

Shift back to the beginnings of an area known as Beaurepaire. The first land concession on Lake Saint Louis at Pointe Beaurepaire was obtained from the Sulpicians by Jean Guénet in 1678. 

Read More about the Beaconsfield Yacht Club....

 

 

Boat Reviews

  • Prev
Commodore’s Boats is a full service shipyard with over 50 years of generational history and ...
Cruisers Yachts debuts the all-new 42 Cantius. The sporty, luxury cruiser will make its first ...
Once again, the designers at Jeanneau have outdone themselves with the innovative new Leader 10.5 ...
The introduction of X-Yachts’Xc range in 2008 has proven itself to be something of a game changer ...
Hull #1 ZINNIA, the all-new, twin outboard MJM 35z left Boston BoatWorks on July 5 for Newport and ...
Following a 10-year hiatus, Richmond, BC-based Crescent Custom Yachts is once again launching ...
According to the folks at Fraser Yacht Sales, you couldn't ask for more - the new Azimut Atlantis ...
During those cold, cold, sunless, dreary months of January and February, I want to remember the fun ...
The Rossiter 23 Classic Day Boatis both a logical extension of the Canadian-built Rossiter line and ...
It's rare for Canadian Yachting magazine to report on the same boat twice, but that is how ...

 

A Trip To Iconic Italian Yachtbuilder Riva And Lake Como

Riva And Lake ComoStory And Photos By Iain Macmillan

Eyes turn and conversations on shore pause as one boat in particular approaches the Grand Hotel Serbelloni’s jetty that extends out into the sparkling blue waters of Lake Como off Bellagio, northern Italy. It’s not because the Clooneys, George Lucas or Richard Branson are on board, not this time anyway, the attention is on the boat itself. The world’s most valuable, most magnificent mahogany launch, a classic 1960s Riva Aquarama, is paired appropriately with Como’s most prestigious hotel, its Michelin star dining room and suites that have housed royalty; a perfect mix of pleasure, luxury and a distinguished history.

Read more about Riva and Lake Como....

 

 

DIY & How to

  • Prev
 Since the initial article of this column we have identified a wide range of apps and ...
Since the initial article of this series we have looked at the iPad and its use as a marine ...
The moment we all dread. It’s a warm sunny day and you’re out for a cruise. Suddenly ...
For most of us – this is the time to make the most of the boating season – launch and ...
Question: Is it possible to mount, protect and charge your iPad during marine navigation. ...
  Is iNavX the superlative marine navigation app?    
Question: Can I buy generic automotive parts or products for my boat, or should they specify ...
  There is a good deal of hesitancy and lack of understanding as to whether an iPad can ...
‘Top dead centre’ is the position of the wheel that allows you to steer your boat ...

Marine Products

  • Prev
With all the devastation in the eastern Caribbean a natural question to ask is ‘is our boat in that ...
During the heat of summer, many boat owners turn on their air conditioning units. Whether portable ...
A milestone has been reached. The new D13-1000 sees Volvo Penta move into the 1000hp marine leisure ...
  Still looking for the perfect slip for your boat? Look no further!    
Canadian Yachting traveled to Newport to review and sea trial the new MJM 35z.     ...
Erik Pawson Of Watertight Boatworks here in North Vancouver, BC, is really passionate about the ...
Hydro Clean Hull Wash is Canada's first automatic, mechanical hull wash system and the company has ...
For 2017 there were a total of 31 events planned and 2 were cancelled for a total of 29 events. All ...
When Terry Conrad, of Conrad Marine, offered me ride in a brand-new Sea Fox 288 Commander that he ...
EMCS Industries Ltd. has a unique antifouling system that’s quite clever and incredibly ...